• Journal of Korea Technology Innovation Society
• /
• v.17 no.1
• /
• pp.25-44
• /
• 2014

This study analyzed technological competitiveness of five major countries by using patent information that is typical intellectual property. Technological activity, patent competitiveness, market securement and patent concentration were designed as evaluation items for the technological competitiveness analysis, and the number of patent applications, family patents and triad patent families, and the paten concentration index were reflected as evaluation factors to be scored. For technologies to be analyzed, it referred to the energy harvesting technologies selected as 500 future technologies in the future technologic white paper 2013 published by KISTI. They were classified into technologies using thermoelectric, piezoelectric and photovoltaic elements, which are main detailed technologies of the energy harvesting technology, to investigate and analyze patent information for each detailed technology to understand their technological competitiveness. As a result, the United States ranked top with 75 and 70 points in the technology using thermoelectric and piezoelectric elements respectively, and Japan ranked top with 90 points in the energy harvesting technology using photovoltaic elements. It was analyzed that Korea held the second rank in the field using piezoelectric and photovoltaic elements, and the fifth in the technology using thermoelectric elements.

• Analytical Science and Technology
• /
• v.31 no.1
• /
• pp.31-38
• /
• 2018

The energy recovery rate estimation method proposed through the Waste Control Act does not take into account the energy used in practice. In addition, the method for measuring a lower heating value, which is the main factor of the energy recovery rate, was carried out through a small sampling amount, and thus the representative value of the waste was not reflected. With the revised estimation method (Notification No. 2015-215 of the Ministry of Environment), the energy recovery rate should be estimated based on the actual amount of energy used, and a heat balance method was proposed as a way to estimate the lower heating value. In this study, the lower heating value was estimated for seven industrial waste incineration facilities according to the revised estimation method. All data used in the estimations were achieved from measurement instruments applied to each of the incinerators and through direct measurements taken by the operators for the purposes of calculation. As a result, the lower heating value was estimated to be about 3,404.7 kcal/kg for the seven industrial waste incineration facilities.

• Archives of design research
• /
• v.17 no.4
• /
• pp.233-240
• /
• 2004

Living in the modern age with well-developed scientific technologies, all of us are enjoying convenient lives because of 'energy'. Korea, poor in resources, is importing a large portion of its energy sources from abroad but energy consumption shows an upward tendency due to the continuing economic growth and the improvement of living conditions. The atomic energy is considered a self-reliant, alternative energy source like our country. However, it is necessary to educate the people on and publicize atomic power generation in the face of the widespread negative recognition that the atomic power plant is a hazardous facility. The study approaches to these matters with a human-friendly and environment-friendly coloring plan in the perspective of environment coloring plan. The study aims to minimize negative images of the atomic power, while highlighting its friendly and positive images so as to enhance the confidence of the people on the atomic power and to create a clean image for the atomic power. For this goal, the study examined and analyzed cases of Japanese nuclear power plants and domestic nuclear power plants, and also carried out an on-site survey in the sites in which nuclear power plants would be constructed to extract concrete colors through the analyses of their natural environment and actual conditions. The study also carried out a survey of residents in the regions to induce their participation, and reflected the survey results to the coloring plan. The study is expected to create a stable and friendly image of the nuclear power plant through materializing its environment-friendly image and remove negative recognition that the people have on the nuclear power plant. It also attempted an external environment-coloring plan a s a strategic means for positive publicity and through this, is expected to ultimately contribute to the creation of the new images of nuclear ower plants.

• KCI Concrete Journal
• /
• v.13 no.2
• /
• pp.10-18
• /
• 2001

The spectral analysis of surface waves (SASW) method, which is an in-situ seismic technique, has mainly been developed and used for many years to determine the stiffness profile of layered media (such as asphalt concrete and layered soils) in an infinite half-space. This paper presents a modified experimental technique for nondestructive evaluation of in-place cement mortar compressive strength in single-layer concrete slabs of rather a finite thickness through a correlation to surface wave velocity. This correlation can be used in the quality control of early age cement mortar structures and in evaluating the integrity of structural members where the infinite half space condition is not met. In the proposed SASW field test, the surface of the structural members is subjected to an impact, using a 12 mm steel ball, to generate surface wave energy at various frequencies. Two accelerometer receivers detect the energy transmitted through the medium. By digitizing the analog receiver outputs, and recording the signals for spectral analysis, surface wave velocities can be identified. Modifications to the SASW method includes the reduction of boundary reflections as adopted on the surface waves before the point where the reflected compression waves reach the receivers. In this study, the correlation between the surface wave velocity and the compressive strength of cement mortar is developed using one 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slab of 2,000 psi (140 kgf/$\textrm{cm}^2$) and two 36"x36"x4"(91.44$\times$91.44$\times$91.44 cm) cement mortar slabs of 3,000 psi (210 kgf/$\textrm{cm}^2$).

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.3
• /
• pp.202-207
• /
• 2009

A 75kW MCFC stack with the reactive area of 9,600cm$^2$ has been operated and validated in Boryeong thermal power plant. The 75kW MCFC stack was installed at the end of November 28, 2008 and started initial operation on December 23, 2008 after pretreated for about 20 days. At initial load operation, the stack showed the Open Circuit Voltage of 137V, which approaches the theoretical value. At the early stage of rated power operation, the stack displayed the voltage of 104V at the current of 754A and reached the maximum generating power of 78.5kW DC. This stack has been operated for 2,890 hours until April, 2009. In addition, the operation time of rated power records 1890 hours. This Operating result is scheduled to be reflected the design of l25kW stack.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.91-104
• /
• 2017

In this study, we discuss the modeling of domestic transport sector using GCAM(Global Change Assessment Model). The GCAM is one of integrated assessment models widely used in internationally modeling community, and applied for the evaluation of IPCC 5th Report. Nevertheless, it is noted that there are a considerable number of problems in its application to domestic transport sector. First, the base year information of GCAM for detailed transportation service demand is found not consistent with national statistics. Second, the transportation sector simulation results do not properly reflect the past trends of service demand. Thus, the base year service demand is carefully matched with the detailed national statistics. In addition, the existing models were checked and modified so that the simulation results of service demand can accurately reflect past trends of national statistics. As a result, it is reported in detail how the current GCAM simulation results are corrected and how the trend of past transportation sector service demands is properly reflected. This study is expected to be useful as a basic tool for future scenario analysis for transportation policy, technology evaluation and greenhouse gas reduction measures.

• Journal of Navigation and Port Research
• /
• v.28 no.7
• /
• pp.619-627
• /
• 2004

Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Ulsan Harbor and Ulsan New Port, etc. due to construction of New Port in Ulsan Bay. We also considered the increase of water depth at the entrance channel by dredging work up to 15 meters depth in order to see the dredging effect. Among several model analyses, the nonlinear and breaking wave conditions are showed the most applicable results. This type of trial might be a milestone for port development in macro scale, where the induced impact analysis in the existing port due to the development could be easily neglected.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.662-667
• /
• 2007

The thermal performance comparisons of the dish solar collector system are numerically investigated with mirror arrays and receiver shapes. In order to compare the performances of the dish solar collector systems, six different mirror arrays and four different receiver shapes are considered and the radiative heat flux distribution on the inside of the receiver is analyzed. A parabolic-shaped perfect mirror of which diameter is 1.5 m is considered as a reference of the mirror arrays. Five different mirror arrays of twelve identical parabolic -shaped mirror facets of which diameter are 0.4 m are proposed in this study. Their reflecting areas, which are 1.5 $m^2$, are the same. Four different receiver shapes are a dome, a conical, a cylindrical and a unicorn type. The solar irradiation reflected by mirrors is traced using the Monte-Carlo method. In addition, the radiative properties of the mirror surface can vary the thermal performance of the dish solar collector system so that the effects of the surface reflectivity and the surface absorptivity are considered. Based on the calculation, the design information of dish solar collector system for producing the electric power can be obtained. The results show that the dome type has the best performance in receiver shapes and the 2AND4INLINE has the best performance in mirror arrays except the perfect mirror.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.734-744
• /
• 2013

In this study, the telematics device was installed on the car (OBD-II) to collect the information on the operation conditions from each sample vehicle. Based on the information the domestic driving pattern was analysed and the ratio of cold start length was estimated. As a result of analysis for driving pattern, we found a difference in the frequency of driving on the hourly or seasonal basis. Then, the driving pattern of the rush hours, weekdays, and weekends could be derived. Also, from the study, an average of 2.22 times per day occurred in a single trip and average driving distance for the trip was 15.72 km. In addition, the proportion of cold start length was analyzed to be 16.11%. The seasonal cold start length has big difference from season to season (Winter 26.63%, Summer 8.22%, Intermediate 12.65%). There was an inverse relationship between the outside temperature and ratio of cold start length. In order to improve the accuracy of the cold emission estimation, it is necessary to apply domestic ratio of cold start length that driving pattern and temperature in Korea is reflected.

• Journal of Nutrition and Health
• /
• v.35 no.9
• /
• pp.903-911
• /
• 2002

The effects of dietary levan, high-molecular-weight $\beta$-2,6-linked fructose polymer, on adiposity, serum leptin and UCP expression in rats fed high fat diet were studied. The adipose tissue hormone, leptin has been proposed to be involved in the regulation of food intake and energy expenditure. Uncoupling protein (UCP), a mitochondrial protein that uncouples the respiratory chain from oxidative phosphorylation, generates heat instead of ATP, thereby increase energy expenditure. To determine whether the dietary levan may have the anti-obesity effect, 4 wk old Sprague Dawley male rats fed high fat diet for 6 wks to induce obesity, and subsequently fed one of three diets for further 6 wks: 1) high fat (40% of calories) diet without levan 2) with 3% (w/w) levan 3) with 5% levan. For the comparison, control group fed AIN-76A diet. Visceral and peritoneal fat masses were lower in high fat diet with levan groups compared to high fat diet group. The effect of levan was dose-dependent. Adipocyte size was significantly reduced in the levan diet groups compared to the no levan diet group. Serum cholesterol level was not affected by levan containing diet, while the serum HDL cholesterol level was higher in leven diet groups. In addition, serum triglyceride level was markedly reduced by levan containing diet, thus lower than that of control group. Serum leptin was reduced by levan containing diet and lower in 5% levan group compared to 3% levan group (p < 0.001), as a result, serum leptin and insulin levels of 5% levan group were reduced to level of control group. Futhermore, the serum leptin level reflected the adiposity. The expression of UCP 1, and UCP 2 in brown adipose tissue was up-regulated by levan containing diet. In conclusions, levan containing diet reduced adiposity and serum triglyceride but increased UCP expression in the obese rats fed high fat diet. (Korean J Nutrition 35(9) : 903~911, 2002)