• Asian-Australasian Journal of Animal Sciences
• /
• 제18권7호
• /
• pp.1036-1040
• /
• 2005

Near-infrared reflectance spectroscopic (NIRS) calibrations were developed for accurate and fast prediction of whole broiler chicken carcass composition. The Feed and Forage Foss systems Model 5000 Reflectance Transport Model 5000 with near-infrared reflectance spectroscopy (NIRS)-WinISI II windows software was used for this purpose. One equation was developed for the prediction of each carcass component. One hundred and fifty freeze dried broiler whole carcass samples were ground in a Cyclotech 1,093 sample mill and analyzed for dry matter, protein, fat, calcium and phosphate. Samples were divided into two sets: a calibration set from which equations were derived and a prediction set used to validate these equations. The chemical analysis values (mean${\pm}$SD) were calculated based on dry matter basis as follows: dry matter: 33.41${\pm}$2.78 (range: 26.41-43.47), protein: 54.04${\pm}$6.63 (range: 36.20-76.09), fat 35.44${\pm}$8.34 (range: 7.50-55.03), calcium 2.55${\pm}$0.65 (range: 0.99-4.41), phosphorus 1.38${\pm}$0.26 (range: 0.60-2.28). One hundred and three samples were used to calibrate the equations and prediction values. The software used was modified to obtain partial least square regression statistics, as it is the most suitable for natural products analysis. The coefficients of determination ($R^2$) and the standard errors of prediction were 0.82 and 1.83 for the dry matter, 0.96 and 1.98 for protein, 0.99 and 1.07 for fat, 0.90 and 0.30 for calcium and 0.91 and 0.11 for phosphorus, respectively. The present study indicated that NIRS can be calibrated to predict the whole broiler carcass chemical composition, including minerals in a rapid, accurate, and cost effective manner. It neither requires skilled operators nor generates hazardous waste. These findings may have practical importance to improve instrumental procedures for quick evaluation of broiler carcass composition.

• 한국측량학회지
• /
• 제39권6호
• /
• pp.563-569
• /
• 2021

KOMPSAT-3, 3A호의 운용 및 다양한 특성을 가지는 차세대중형위성의 발사에 따라서, 고해상도 위성영상의 활용이 지속적으로 증대되고 있다. 특히, ARD (Analysis Ready Data) 형태로의 위성영상 제공을 위하여 기하보정 및 방사보정 등의 다양한 전처리에 대한 연구가 이루어지고 있다. 위성영상의 전처리를 위해서는 촬영 영상에 관한 보조정보가 필요하며, 태양 천정각, 태양 방위각, 촬영각 등이 대표적인 자료이다. 그러나, 대부분의 고해상도 위성영상은 영상 전체에 대한 태양 천정각 및 촬영각을 단일 변수로 제공하고 있다. 본 연구에서는 RFM (Rational Function Model) 및 영상의 보조정보들을 이용하여 영상의 각 화소에 대응되는 태양 천정각 및 촬영각을 산출해보고, 이에 따른 품질을 평가해보고자 하였다. 특히, 화소 기반의 태양 천정각 및 촬영각의 활용을 위하여, 대기상부 반사율(top of atmospheric reflectance)을 산출함에 있어서, 화소 기반의 보조 자료를 적용하고, 단일 상수 기반의 대기상부 반사율과의 비교평가를 수행하였다. 실험 결과, 화소 기반의 태양 천정각 및 촬영각 정보는 보조정보와 유사한 경향을 보였으며, 이를 이용하여 계산된 대기상부 반사율은 왜곡이 감소되었음을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권4호
• /
• pp.580-583
• /
• 2005

We have evaluated the application of spectroscopy using an insertion-type fiber-optic probe and a sensor at wavelengths from 400 to 1,100 nm to the measurement of milk fat content on dairy farms. The internal reflectance ratios of 183 milk samples were determined with a fiber-optic spectrophotometer at 5$^{\circ}C$, 20$^{\circ}C$ and 40$^{\circ}C$. Partial least squares (PLS) regression was used to develop calibration models for the milk fat. The best accuracy of determination was found for an equation that was obtained using smoothed internal reflectance data and three PLS factors at 20$^{\circ}C$. The correlation coefficients between predicted and reference milk fat at 5$^{\circ}C$, 20$^{\circ}C$ and 40$^{\circ}C$ were r=0.753, r=0.796 and r=0.783, respectively. The predictive explained variances ($Q^2$) of the final model, moreover, were more than 0.550 at all temperatures, and the regression coefficients of determination ($R^2$) were more than 0.6 (60%). Our results indicate that milk has different internal reflectance measured in the range of visible and near infrared wavelengths (400 to 1,100 nm), depending on its fat content.

• Journal of Information Processing Systems
• /
• 제16권2호
• /
• pp.435-446
• /
• 2020

With the ability to learn rules from training data, the machine learning model can classify unknown objects. At the same time, the dimension of hyperspectral data is usually large, which may cause an over-fitting problem. In this research, an identification methodology of tea diseases was proposed based on spectral reflectance and machine learning, including the feature selector based on the decision tree and the tea disease recognizer based on random forest. The proposed identification methodology was evaluated through experiments. The experimental results showed that the recall rate and the F1 score were significantly improved by the proposed methodology in the identification accuracy of tea disease, with average values of 15%, 7%, and 11%, respectively. Therefore, the proposed identification methodology could make relatively better feature selection and learn from high dimensional data so as to achieve the non-destructive and efficient identification of different tea diseases. This research provides a new idea for the feature selection of high dimensional data and the non-destructive identification of crop diseases.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.307-312
• /
• 1998

The paper first describes the atmospheric correction algorithm for the Ocean Color and Temperature Scanner (OCTS) visible band data used at Earth Observation Center (EOC) of National Space Development Agency of Japan (NASDA). It uses 10 candidate aerosol models including "Asian dust model" introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands where the reflectance of the water body can be discarded, the algorithm selects a pair of aerosol models that accounts best for the observed spectral reflectances to synthesize the aerosol reflectance in other bands. The paper also evaluates the performance of the algorithm by comparing the satellite estimates of water-leaving radiance and chlorophyll-a concentration with selected buoy-and ship-measured data. In comparison with the old CZCS-type atmospheric correction algorithm where the aerosol reflectance is as-sumed to be spectrally independent, the OCTS algorithm records factor 2-3 less error in estimating the normalized water-leaving radiances. In terms of chlorophyll-a concentration estimation, however, the accuracy stays vey similar compared to that of the CZCS-type algorithm. This is considered to be due to the nature of in-water algorithm which relies on spectral ratio of water-leaving radiances.

• 대한원격탐사학회지
• /
• 제14권3호
• /
• pp.262-276
• /
• 1998

The paper first describes the atmospheric correction algorithm for the Ocean Color and Temperature Scanner (OCTS) visible band data used at Earth Observation Center (EOC) of National Space Development Agenrr of japan (NASDA). It uses 10 candidate aerosol models including "Asian dust model" introduced in consideration of the unique feature of aerosols over the east Asian waters. Based on the observations at 670 and 865 nm bands where the reflectance of the water body can be discarded, the algorithm selects a pair of aerosol models that accounts best for the observed spectral reflectances to synthesize the aerosol reflectance in other bands. The paper also evaluates the performance of the algorithm by comparing the satellite estimates of water-leaving radiance and chlorophyll-a concentration with selected buoy- and ship-measured data. In comparison with the old CZCS-type atmospheric correction algorithm where the aerosol reflectance is assumed to be spectrally independent, the OCTS algorithm records factor 2-3 less error in estimating the normalized water-leaving radiances. In terms of chlorophyll-a concentration estimation, however, the accuracy stays very similar compared to that of the CZCS-type algorithm. This is considered to be due to the nature of in-water algorithm which relies on spectral ratio of water-leaving radiances.

• 항공우주기술
• /
• 제4권1호
• /
• pp.211-220
• /
• 2005

본 연구의 목적은 향후 발사될 KOMPSAT-2 MSC와 유사한 분광특성을 가지는 Landsat ETM+ 영상자료와 동시기에 지상에서 관측한 surface reflectance 자료를 이용하여 영상기반의 대기보정 모델을 검토하는 것이다. 이러한 영상기반의 대기보정은 현장관측 자료가 필요하지 않다는 이점이 있다. TOA reflectance와 현장 관측치 간에 상당한 차이를 보이며, 연구결과는 COST 모델을 기반으로 하는 Case 1이 세 가지 경우 중에서 가장 정확함을 나타냈다. 한편 Case 2_1의 경우 Case 1처럼 정확하나 그 값은 현장 자료보다 낮게 나타났다. 또한 Case 3_1은 일부 밴드에서 관측치와 전혀 상관성이 없는 것으로 나타났다. 향후 IKONOS와 같은 고해상도 영상자료에 본 연구방법을 적용하면 MSC 데이터 특성에 맞는 대기보정 모델을 개발할 수 있을 것으로 판단된다.

• 농업과학연구
• /
• 제43권5호
• /
• pp.715-722
• /
• 2016

Rapid determination of food quality is important in food distribution. In this study, the chemical properties of oats were analyzed using visible-near infrared (VIS-NIR) spectroscopy. The objective of this study was to develop and validate a predictive model of oat quality by VIS-NIR spectroscopy. A total of 200 oat samples were collected from domestic and import markets. Reflectance spectra, moisture, protein, fat, Fe, and K of oat samples were measured. Reflectance spectra were measured in the wavelength range of 400 - 2,500 nm at 2 nm intervals. The reflectance spectrum of an oat sample was measured after sample cell and reflectance plate spectrum measurement. Preprocessing methods such as normalization and $1^{st}$ and $2^{nd}$ derivations were used to minimize the spectroscopic noise. The partial-least-square (PLS) models were developed to predict chemical properties of oats using a commercial software package, Unscrambler. The PLS models showed the possibility to predict moisture, protein, and fat content of oat samples. The coefficient of determination ($R^2$) of moisture, protein, and fat was greater than 0.89. However, it was hard to predict Fe and K concentrations due to their low concentrations in the oat samples. The coefficient of determinations of Fe and K were 0.57 and 0.77, respectively. In future studies, the stability and practicability of these models should be improved by using a high accuracy spectrophotometer and by performing calibrations with a wider range of oat chemicals.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.260-268
• /
• 2008

Optical diffuse reflectance sensing has potential for rapid and reliable on-site estimation of soil properties. For good results, proper calibration to measured soil properties is required. One issue is whether it is necessary to develop calibrations using samples from the specific area or areas (e.g., field, soil series) in which the sensor will be applied, or whether a general "factory" calibration is sufficient. A further question is if specific calibration is required, how many sample points are needed. In this study, these issues were addressed using data from 42 paddy fields representing 14 distinct soil series accounting for 74% of the total Korean paddy field area. Partial least squares (PLS) regression was used to develop calibrations between soil properties and reflectance spectra. Model evaluation was based on coefficient of determination ($R^2$) root mean square error of prediction (RMSEP), and RPD, the ratio of standard deviation to RMSEP. When sample data from a soil series were included in the calibration stage (full information calibration), RPD values of prediction models were increased by 0.03 to 3.32, compared with results from calibration models not including data from the test soil series (calibration without site-specific information). Higher $R^2$ values were also obtained in most cases. Including some samples from the test soil series (hybrid calibration) generally increased RPD rapidly up to a certain number of sample points. A large portion of the potential improvement could be obtained by adding about 8 to 22 points, depending on the soil properties to be estimated, where the numbers were 10 to 18 for pH, 18-22 for EC, and 8 to 22 for total C. These results provide guidance on sampling and calibration requirements for NIR soil property estimation.

• 대한공간정보학회지
• /
• 제23권3호
• /
• pp.3-10
• /
• 2015

지상의 모든 물체는 고유의 분광 반사율을 갖고 있으며, 이러한 특성을 이용하여 지상 물체의 분류와 목표물 탐지 등이 가능하다. 정확한 분석을 위해서는 취득된 원격탐사 자료를 분광 반사율로 변환해야 한다. 이를 위한 절대복사보정 기법으로는 자료 제공 기관에서 명시한 변환 수식을 이용하는 방법, 지상에서 측정한 분광 반사율만으로 단순 경험적 회귀 분석을 이용하는 방법, ATCOR/FLAASH 같은 수학적 모델을 이용하는 방법 등이 있다. 본 연구에서는 CASI 초분광 영상의 분광 반사율 자료를 이용하여 RapidEye 위성영상의 대리복사보정을 수행하고, 그 결과를 다른 복사보정 기법 결과 및 지상 자료와 비교하였다. 실험 결과 제안 기법이 ATCOR 및 New Kurucz 2005 기법보다 높은 유사성을 보였으며, 일반적으로 활용되는 ELM 기법과 유사한 결과를 도출하였다.