This paper deals with the operating-speed (high-speed) balancing of a refinery gasoline HDS (hydrodesulfurization) process recycle-gas 8-stages compressor rotor. A low-speed balancing condition of the rotor was measured as maintaining the G2.5 level. But an inspection run of operating-speed balancing condition, using tilting-pad journal bearings of actual use, showed that while it could be continuously-operated safely at a rated speed of 10,500 rpm, the rotor would not be able to run over 11,000 rpm as the vibration increased very sharply, approaching 11,000 rpm. In order to cure that a series of operating-speed balancing, which first calculated balance correction-weights by applying the influence coefficient measured and calculated at 10,500 rpm and then implemented correction works, was carried-out. The final operating-speed balancing results showed that the vibrations at the bearing pedestals represented very good levels of 0.2 mm/s by decreasing to as much as the 1/10 of the original vibrations and particularly, even at a targeted maximum continuous operating speed, MCS, of 11,500 rpm the vibrations represented about 1 mm/s, which is the operating-speed balancing vibration specification of API. Therefore, the expansion of MCS was successfully accomplished through the operating-speed balancing.
Industrial control systems (ICSs) used to be operated in closed networks, that is, separated physically from the Internet and corporate networks, and independent protocols were used for each manufacturer. Thus, their operation was relatively safe from cyberattacks. However, with advances in recent technologies, such as big data and internet of things, companies have been trying to use data generated from the ICS environment to improve production yield and minimize process downtime. Thus, ICSs are being connected to the internet or corporate networks. These changes have increased the frequency of attacks on ICSs. Despite this increased cybersecurity risk, research on ICS security remains insufficient. In this paper, we analyze threats in detail using STRIDE threat analysis modeling and DREAD evaluation for distributed control systems, a type of ICSs, based on our work experience as cybersecurity specialists at a refinery. Furthermore, we verify the validity of threats identified using STRIDE through case studies of major ICS cybersecurity incidents: Stuxnet, BlackEnergy 3, and Triton. Finally, we present countermeasures and strategies to improve risk assessment of identified threats.
A preliminary criticality analysis for novel pyrochemical apparatuses for the reprocessing of mixed uranium-plutonium nitride spent nuclear fuel from the BREST-OD-300 reactor was performed. High-temperature processing apparatuses, "metallization" electrolyzer, refinery remelting apparatus, refining electrolyzer, and "soft" chlorination apparatus are considered in this work. Computational models of apparatuses for two neutron radiation transport codes (MCU-FR and MCNP) were developed and calculations for criticality were completed using the Monte Carlo method. The criticality analysis was performed for different loads of fissile material into the apparatuses including overloading conditions. Various emergency situations were considered, in particular, those associated with water ingress into the chamber of the refinery remelting apparatus. It was revealed that for all the considered computational models nuclear safety rules are satisfied.
Many oil refinery companies have been proactively carried out marketing activities to survive in highly intensified service station industry. In 2012, SK Energy ranked number one in three customer satisfaction surveys (NCSI, KCSI, and KS-SQI). SK Energy's success is in its differentiated customer satisfaction business strategy. SK Energy has been implementing various marketing activities. As a part of the activities, it issued an affinity credit card with on spot discount privilege for the first time in the oil refinery industry. SK Energy also issued EnClean bonus card for OK Cashbag points that can be used for discounts at the service stations. On top of all, SK Energy generated point value-up with '3K Exclusive Privilege' program. In addition, team 'CS 119' was formed to noticeably improve the service. 'CS 119' visited each service station, diagnosed its CS service level then provided customized field training for improvement. Long-termimplementation of 'ACE Program', a field-base CS monitoring system, regularly checked customer satisfaction level. 'ACE Program' has significantly contributed improving SK Service Station's service quality and customer satisfaction. This case reviews customer satisfaction marketing activities SK Energy carried out. The focus is on distinctive factors that distinguish SK Energy's customer satisfaction marketing activities from competitors.
유효규산함량이 61 ppm 사양토(砂壤土)에서 규회석(硅灰石) 및 규산질비료시용(珪酸質肥料施用)에 의한 규산용출(珪酸溶出)의 변화(變化)에 관(關)해서 실내(室內) 시험(試驗)을 수행(遂行)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 규회석(硅灰石) 및 규산질비료(珪酸質肥料)를 토양(土壤)에 처리(處理)하고 증류수(蒸溜水) 및 1N-NaOAc(pH 4.0)로 연속침출(連續浸出)했을 때 각(各) 침출용액중(浸出溶液中)의 규산용출농도(珪酸溶出濃度)는 규회석(硅灰石)보다 규산질비료(珪酸質肥料) 처리(處理)에서 높았다. 2. 규회석(硅灰石) 및 규산질비료(珪酸質肥料)를 토양(土壤)에 처리(處理)하고 증류수(蒸溜水)로 연속침출(連續浸出)했을 때 pH는 규산질비료(珪酸質肥料)보다 규회석처리(硅灰石處理)에서 높았다. 3. 규회석(硅灰石) 및 규산질비료(珪酸質肥料)를 토양(土壤)에 처리(處理)하고 항온(恒溫)했을 때 규회석처리(硅灰石處理)는 시용량(施用量)이 많아짐에 따라 수용액중(水溶液中)의 $SiO_2$ 및 K 농도(濃度)는 낮아졌고 규산질비료(珪酸質肥料)에서는 높아졌으며 pH, Ca 및 Mg 농도(濃度)은 두비종(肥種) 모두 높아졌다. 4. 토양(土壤)에 pH를 달리하여 규산용액(珪酸溶液)을 흡착(吸着)시킨 결과(結果) pH 9.4 정도(程度)에서 최대(最大)로 흡착(吸着)되었다.
우리나라 5개 정유사에서 일간 생산되는 중질잔사유 (Vacuum Residue) 량은 약 200,000 B/d이며, 일부는 Asphalt 또는 Sulfur fuel oil, 기타 탈황공정(RHD)둥에서 upgrading 되고 있다. 중질잔사유는 유황 및 중금속 물질의 함유량이 높아 가스화를 통한 효율적인 이용이 요구되고 있으며, 최근들어 효율적인 중질잔사유의 사용을 위하여 SK정유와 LG, Caltex에서 435-500 MWe IGCC 발전소 및 수소 제조공정을 위한 타당성 조사를 한 바 있다. 현재 한국에너지기술연구원에서는 습식분류상 가스화장치를 이용하여 중질잔사유가스화 특성에 관한 연구를 수행하고 있다. 실험은 반응온도 : 1,100~1,25$0^{\circ}C$, 반응압력 : 1~6kg/$ extrm{cm}^2$G, oxygen/V.R ratio : 0.8~0.9 and steam/V.R ratio : 0.4~0.5를 유지하며 수행되었으며, 실험을 통해 합성가스(CO+H$_2$) 조성 : 85~93%, 생성가스 유량 : 50~110Nm$^3$/hr., 발열량 : 2,300~3,000 ㎉/Nm$^3$, 탄소전환율 : 65~92 및 냉가스효율 = 60~70%를 얻을 수 있었다. 아울러, 평형모델을 이용하여 중질잔사유가스화 공정을 모형화 하였으며 계산결과를 실험결과와 비교하여 모델의 타당성을 검토하였다.
우리나라 5개 정유사에서 일간 생산되는 중질잔사유 (Vacuum Residue)량은 약 200.000 B/d이며, 일부는 Asphalt 또는 Sulfur fuel oil, 기타 탈황공정(RHD) 등에서 upgrading 되고 있다. 중질잔사유는 유황 및 중금속 물질의 함유량이 높아 가스화를 통한 효율적인 이용이 요구되고 있으며, 최근들어 효율적인 중질잔사유의 사용을 위하여 SK정유와 LG Caltex에서 435~500 MWe IGCC 발전소 및 수소 제조공정을 위한 타당성 조사를 한 바 있다. 현재 한국에너지기술연구원에서는 습식분류상 가스화장치를 이용하여 중질잔사유가스화 특성에 관한 연구를 수행하고 있다. 실험은 반응온도: 1,100~1,25$0^{\circ}C$, 반응압력: 1~6 kg/$\textrm{cm}^2$G, oxygen/V.R ratio: 0.8~0.9 and steam/V.R ratio: 0.4~0.5를 유지하며 수행되었으며, 실험을 통해 합성가스(CO+H$_2$) 조성 : 85~93%, 생성가스 유량: 50~110 Nm$^3$/hr. 발열량: 2,300~3,000 k㎈/Nm$^3$, 탄소전환율: 65~92 및 냉가스효율: 60~70%를 얻을 수 있었다. 아울러, 평형모델을 이용하여 중질잔사유가스화 공정을 모형화하였으며 계산결과를 실험결과와 비교하여 모델의 타당성을 검토하였다.
황산으로 탈황 폐촉매를 침출한 결과 황산농도 1 M, 반응시간 1 hr인 실험조건에서 Ni 및 V은 95% 이상, 그리고 Mo은 30%가 침출되었다. 탈황 폐촉매의 Mo matrix 특성으로 인하여 다른 금속에 비하여 Mo의 침출율이 낮았으며, 본 침출반응은 확산반응에 의하여 제어되는 것으로 판단된다. Mo을 완전히 침출하기 위하여 유황성분이 제거된 폐촉매로 침출실험을 실시하였다. 1M 황산으로 처리후 탄산나트륨으로 세척시 Ni, Mo 그리고 V의 침출율은 99% 이었다. Ni 2 g/L; V 9 g/L, Mo 0.6 g/L 조성의 침출액을 LIX 841로 용매추출한 조건에서 A:O 비 5:2, 2단계로 처리시 Mo은 98% 이상 추출되었으며 A:O 비 5:3, 2단계로 처리시 V은 82%가 추출되었다.
국가 기간산업 중 하나인 정유산업은 산출물인 석유제품을 각 산업부문에 중간재로 공급하고 있으므로 석유제품의 공급지장이 국민경제에 미치는 영향은 큰 편이다. 이에 본 논문에서는 정유산업 산출물 1원 어치의 공급지장이 타 산업에 미치는 부정적 생산차질 효과를 의미하는 공급지장효과를 분석하고자 한다. 이를 위해 산업간 중간재의 흐름을 하나의 표로 나타낸 산업연관표를 활용한 산업연관분석을 적용하고자 한다. 보다 구체적으로는 공급유도형 모형을 활용하되 1990년부터 2012년까지를 분석대상 기간으로 한다. 아울러 조선산업, 반도체산업, 철강산업과 같은 타 국가 기간산업과의 비교분석도 수행한다. 분석결과 2012년 기준 정유산업의 공급지장효과는 0.9025원으로 분석되었다. 세부적으로 살펴보면 화학제품산업 및 운송서비스산업에 미치는 공급지장효과가 각각 0.2113원 및 0.1140원으로 비교적 큰 편이었다. 정유산업의 공급지장효과는 철강산업에 대한 값(1.4131원)보다는 작지만 조선산업(0.0586원) 및 반도체산업(0.1111원)에 비해서는 큰 것으로 판단된다.
동북아 3국(한국, 중국, 일본)의 원유시장 수급과, 원유수급에 영향을 주는 석유제품별 수급 현황을 살펴보는 것은 원유와 석유제품수급에서 발생할 수 있는 석유안보의 의미를 검토하는데 도움을 준다. 2006년 동북아 3국의 석유시장에서는 1,060만 배럴/일의 수급불균형이 발생하였고, 2030년에는 1,550~2,200만 배럴/일의 불균형이 발생할 것으로 전망되며, 이러한 수급불균형은 국가간 교역으로 해결되고 있다. 원유소비는 다양한 석유제품의 수요로 나타나는데, 2005년 중국은 경유>휘발유>연료유>LPG>나프타>등 항공유, 일본은 경유>휘발유>나프타>등 항공유>연료유>LPG, 한국은 나프타>경유>연료유>LPG>등 항공유>휘발유 순의 수요패턴을 보였다. 수요가 주어진 경우, 석유제품의 공급을 담당하는 각국의 주어진 정제시설규모는 공급 측면에서 석유제품의 수불균형에 영향을 미친다. 본 연구는 관련하여 3국의 상압증류시설과 이용률에 관해서 함께 살펴본다. 본 연구는 원유와 석유제품의 수급, 그리고 정제설비시장의 국가별 분포와 계획 등과 석유안보의 개념이 무관하지 않음을 실제 자료를 통해 평가해 보고, 석유안보 확보를 위한 다양한 방안마련에 대해 논의한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.