• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.381-395
• /
• 1989

The main purpose of this research is to provide scientific informations about standard wage and performance tariffs in forest management with special reference to working time for thinning. To identify relationships between net working time and tree characteristics, three geographically different sample plots were established at Yangsan, Bongpyung and Jinan and 460 oaks, 372 Japanese larches, 232 red pine and 240 pitch pine mere selected at each sample plots. The results of statistical analysis using multiple regression are as follows ; 1. Five independent variables of breast height diameter(DBH), mid-diameter(MD) large end diameter(LD), log-length(L), No. of branches(NOB) were stable independent of worker and tree species. 2. Comparing correlation coefficient of five independent variables, the best predictive variables, breast height diameter and No. of branches, were selected. Breast height diameter and No. of branches were identified as the most important independent variables in terms of effect on the dependent variable of the working time. 3. Comparing coefficient of determination (Rp) and residual mean square (MSEp), the best Linear regression equation for each tree species was selected as follower : $WT=a+b1{\times}NOB+b2{\times}DBF$ 4. Proportion of hang-up time to total working time in thinning were 66% in oak stand, 74%, in Japanese larch stand, 55%, in red pine stand and 52% in pitch pine stand, respectively. 5. Based on the best regression equation, a table of working time was made by strata of number of branches and breast height diameter. 6. Total working time using the best regression equation in Table 5 can be predicted in terms of felling time, limbing time, hang-up time, i.e., total working time increases by 11 to 13 seconds with every 1 centimeter increase in breast height diameter from 7 to 16 centimeter.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.3
• /
• pp.1101-1126
• /
• 2018

As incipient organizations progress from formation to become larger entities, the procedures and rules that provided managerial and structural advantages in having established the organizations and promoting the growth impede the innovation and creativity vital to maintain the competitive advantage. Adopting Corporate Entrepreneurship (CE), large corporations have tried to overcome the dilemma and to sustain the innovation and creativity in order to effectively cope with harsh competitive realities. Recently, some advanced corporations are trying to enhance CE by setting up an internal venture program as a seed organization for CE. By making an in-depth analysis of the internal venture program, 'C-Lab' of Samsung that is promoting CE-related characteristics for enhancing CE, we attempt to shed light on (1) what kinds of environments should be built around the seed organization for CE (2) what are the major characteristics that should be promoted through the seed organization in relation to CE (3) What kinds of achievements can be made from the promoted characteristics (4) How the characteristics are spread over the entire organization. Based on the analysis, we suggest a generalized process in which CE can be enhanced. Since different approaches should be taken for managing the seed organization and spreading the characteristics depending on the strengths and weaknesses of a corporation, there must be the step, 'evaluation of corporate internal capabilities' in the process. We believe that each corporation can enhance CE by taking advantage of the process with reference to the C-Lab case study.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2019

In this study, we estimated the tropospheric delay of GNSS (Global Navigation Satellite System) signals during passing through the atmosphere in relation to weather and seasonal factors. For this purpose, we chose four CORS (Continuously Operating Reference Station) stations from inland (CCHJ and PYCH) and on the coast (GEOM and CHJU). A total of 48 days for each station (one set of data for each week) were downloaded from the NGII (National Geographic Information Institute) and processed it using the scientific GNSS software. The average tropospheric delays in winter are less than 2,400 mm, which is about 200 mm less than those in summer. The estimated tropospheric delay shows a similar pattern from all stations except the absolute bias in magnitude, while a large delay was observed for the station located on the coast. In addition, the delay during the day was relatively stable in winter, and the average tropospheric delay was strongly related to the orthometric height. The inland stations have tropospheric delays by the precipitation rather than humidity due to dry weather and difference in temperature. On the contrary, it was primarily caused by the humidity on the sea. The correlation between temperature and water vapor pressure is 0.9 or larger for all stations, and the tropospheric delay showed a high linear relationship with temperature. It is necessary to analyze the GNSS data with higher temporal resolution (e.g. all RINEX data of the year) to improve the stability and reliability of the correlation results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.202-210
• /
• 2022

Recently with the advance in digital dentistry, the fabrication of dentures using computer-aided design and computer-aided manufacturing (CAD-CAM) is on the rise. The denture designed through a CAD software can be produced in a 3-dimensional manufacturing process. This process includes a subtractive processing method such as milling and an additive processing method such as 3D printing and in which it can be applied efficiently in more complex structures. In this case, complete dentures were fabricated using Stereolithography (SLA)-based 3D printing to shorten the production time and interval of visits in patient with physical disabilities due to cerebral infarction. For definitive impression, the existing interim denture was digitally replicated and used as an individual tray. The definitive impression obtained with polyvinyl siloxane impression material was including information about the inclination and length of the maxillary anterior teeth, vertical dimension, and centric relation. In addition, facial scan data with interim denture was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a FDA-approved liquid photocurable resin. The denture showed adequate retention, support, and stability, and results were satisfied functionally and aesthetically.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.179-194
• /
• 2022

After the work-study combination PBL method was first introduced into the P-Tech type in 2018, it was introduced into the degree-linked high-skilled professional course in operation as a pilot project in 2020, and ever since each department has reorganized the standard completion system to meet the PBL operation regulations and developed and operated PBL-based learning and training courses accordingly. With the expansion of the work-study combination PBL in 2021, the operating regulations were revised more elaborately. This paper examined the characteristics of the work-study combination PBL, the PBL operation regulations for each degree-linked high-skilled professional course, and the most recently implemented PBL operation regulations in detail through literature research. Based on this research, it introduced the development process and the result of the PBL-based standard completion system by the IT Convergence SW Engineering Department of KOREATECH and the result of the survey conducted to verify the suitability of the standard completion system after an operation and presented the challenges and improvements required for the degree-linked high-skilled professional course in relation to the changing operation regulations for the work-study combination PBL. This study is expected to provide universities with a reference to the development of training courses to smoothly apply the work-study combination PBL. It is also expected to contribute to the establishment and steady expansion of a unique PBL system that reflects the characteristics of work-study combination by presenting discourses on how the work-study combination PBL should develop, including high-skilled professional courses.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.34-41
• /
• 2022

Recently, digital technology and computer-aided design/computer-aided manufacturing (CAD/CAM) environment have changed the clinician treatment method in the fabrication of dentures. The denture manufacturing method with CAD/CAM technology simplifies the treatment and laboratory process to reduce the occurrence of errors and provides clinical efficiency and convenience. In this case, complete dentures were fabricated using stereolithography (SLA)-based 3D printing in patient with mandibular deviation. Recording base were produced in a digital model obtained with an intraoral scanner, and after recording a jaw relation in the occlusal rim, a definitive impression was obtained with polyvinyl siloxane impression material. In addition, facial scan data with occlusal rim was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a Food and Drug Administration (FDA)-approved liquid photocurable resin. The denture showed adequate retention, support and stability, and results were satisfied functionally and aesthetically.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.105-113
• /
• 2008

Solar radiation induces non-uniform temperature distribution in the bridge structure depending on the shape of the structure and shadows cast on it. Especially in the case of curved steel box girder bridges, non-uniform temperature distribution caused by solar radiation may lead to unusual load effects enough to damage the support or even topple the whole curved bridge structure if not designed properly. At present, it is very difficult to design bridges in relation to solar radiation because it is not known exactly how varying temperature distribution affects bridges; at least not specific enough for adoption in design. Standard regulations related to this matter are likewise not complete. In this study, the thermal behavior of curved steel box girder bridges is analyzed while taking the solar radiation effect into consideration. For the analysis, a method of predicting the 3-dimensional temperature distribution of curved bridges was developed. It uses a theoretical solar radiation energy equation together with a commercial FEM program. The behavior of the curved steel box girder bridges was examined using the developed method, while taking into consideration the diverse range of bridge azimuth angles and radii. This study also provides reference data for the thermal design of curved steel box girder bridges under solar radiation, which can be used to develop design guidelines.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.87-95
• /
• 2010

Portable multi-media products which can service the highest audio-quality by using lossless audio codec has been released and the international lossless codecs, MPEG-4 audio lossless coding(ALS) and MPEG-4 scalable lossless coding(SLS), were standardized by MPEG in 2006. The simple profile of MPEG-4 ALS, it supports up to stereo, was defined by MPEG in 2009. The lossless audio codec should have low-complexity in stereo to be widely used in portable multi-media products. But the previous researches of MPEG-4 ALS have focused on an improvement of compression ratio, a complexity reduction in multi-channels coding, and a selection of linear prediction coefficients(LPCs) order. In this paper, the complexity and compression ratio of MPEG-4 ALS encoder is analyzed in simple profile of MPEG-4 ALS, the method to reduce a complexity of MPEG-4 ALS encoder is proposed. Based on an analysis of complexity of MPEG-4 ALS encoder, the complexity of short-term prediction filter of MPEG-4 ALS encoder is reduced by using the low-complexity filter that is proposed in previous research to reduce the complexity of MPEG-4 ALS decoder. Also, we propose a joint coding decision method, it reduces the complexity and keeps the compression ratio of MPEG-4 ALS encoder. In proposed method, the operation of joint coding is decided based on the relation between cross-correlation of residual and compression ratio of joint coding. The performance of MPEG-4 ALS encoder that has the method and low-complexity filter is evaluated by using the MPEG-4 ALS conformance test file and normal music files. The complexity of MPEG-4 ALS encoder is reduced by about 24% by comparing with MPEG-4 ALS reference encoder, while the compression ratio by the proposed method is comparable to MPEG-4 ALS reference encoder.

• Journal of Arbitration Studies
• /
• v.20 no.2
• /
• pp.173-198
• /
• 2010

The purpose of this paper is to research on the liability for the space damage and the settlement of the dispute with reference to the space activity under the international space treaty and national space law of Korea. The United Nations has adopted five treaties relating to the space activity as follows: The Outer Space Treaty of 1967, the Rescue and Return Agreement of 1968, the Liability Convention of 1972, the Registration Convention of 1974, and the Moon Treaty of 1979. All five treaties have come into force. Korea has ratified above four treaties except the Moon Treaty. Korea has enacted three national legislations relating to space development as follows: Aerospace Industry Development Promotion Act of 1987, Outer Space Development Promotion Act of 2005, Outer Space Damage Compensation Act of 2008. The Outer Space Treaty of 1967 regulates the international responsibility for national activities in outer space, the national tort liability for damage by space launching object, the national measures for dispute prevention and international consultation in the exploration and use of outer space, the joint resolution of practical questions by international inter-governmental organizations in the exploration and use of outer space. The Liability Convention of 1972 regulates the absolute liability by a launching state, the faulty liability by a launching state, the joint and several liability by a launching state, the person claiming for compensation, the claim method for compensation, the claim period of compensation, the claim for compensation and local remedy, the compensation amount for damage by a launching state, the establishment of the Claims Commission. The Outer Space Damage Compensation Act of 2008 in Korea regulates the definition of space damage, the relation of the Outer Space Damage Compensation Act and the international treaty, the non-faulty liability for damage by a launching person, the concentration of liability and recourse by a launching person, the exclusion of application of the Product Liability Act, the limit amount of the liability for damage by a launching person, the cover of the liability insurance by a launching person, the measures and assistance by the government in case of occurring the space damage, the exercise period of the claim right of compensation for damage. The Liability Convention of 1972 should be improved as follows: the problem in respect of the claimer of compensation for damage, the problem in respect of the efficiency of decision by the Claims Commission. The Outer Space Damage Compensation Act of 2008 in Korea should be improved as follows: the inclusion of indirect damage into the definition of space damage, the change of currency unit of the limit amount of liability for damage, the establishment of joint and several liability and recourse right for damage by space joint launching person, the establishment of the Space Damage Compensation Review Commission. The 1998 Final Draft Convention on the Settlement of Disputes Related to Space Activities of 1998 by ILA regulates the binding procedure and non-binding settlement procedure for the disputes in respect of space activity. The non-binding procedure regulates the negotiation or the peaceful means and compromise for dispute settlement. The binding procedure regulates the choice of a means among the following means: International Space Law Court if it will be established, International Court of Justice, and Arbitration Court. The above final Draft Convention by ILA will be a model for the innovative development in respect of the peaceful settlement of disputes with reference to space activity and will be useful for establishing the frame of practicable dispute settlement. Korea has built the space center at Oinarodo, Goheung Province in June 2009. Korea has launched the first small launch vehicle KSLV-1 at the Naro Space Center in August 2009 and June 2010. In Korea, it will be the possibility to be occurred the problems relating to the international responsibility and dispute settlement, and the liability for space damage in the course of space activity. Accordingly the Korean government and launching organization should make the legal and systematic policy to cope with such problems.

• Journal of Preventive Medicine and Public Health
• /
• v.37 no.4
• /
• pp.359-365
• /
• 2004

Objectives : This study was performed to determine whether an increase in abdominal obesity is an independent risk factor for impaired fasting glucose and type 2 DM. Methods : Among 24,212 adults over 30 years who undertook comprehensive medical screening examinations from Jan to Dec 1999, in a university hospital in Seoul, a total of 11,183 subjects were selected who had no DM at baseline and who were followed up more than once by Dec 2002. The average follow up period was 2.4 (${\pm}0.5$) years. DM was defined as having a fasting glucose level $\geq$ 126mg/dl, and impaired fasting glucose as showing a fasting glucose level between 110 and 125 mg/dl. Body weight, height and waist circumference (WC) were simultaneously measured with blood sampling. The relative risks (RRs) for DM and impaired fasting glucose by WC were calculated using Cox proportional hazard model. Ageadjusted rates were estimated by direct standardization using a reference population of 2000 from 30 to 80 years. Results : The average age of the subjects was 41.7 (${\pm}7.0$) years; males 41.2 (${\pm}6.5$) and females 45.6 (${\pm}9.2$). RRs for type 2 DM by WC with the reference group of WC < 80cm were as follows: 2.66 (95%, CI $0.55{\sim}12.8$) for WC of $80{\sim}89cm$ in men, 5.92 (95%, CI $1.08{\sim}32.3$) for WC $\geq$ 90 cm in men, and 2.64 (95%, CI $0.23{\sim}29.8$) for WC of $80{\sim}89cm$ in females. RRs for impaired fasting glucose by WC were 3.03 (95%, CI $2.18{\sim}4.22$) for WC $80{\sim}89cm$ in men, 6.10 (95%, CI $4.25{\sim}8.75$) for WC $\geq$ 90cm in men, and 1.56 (95%, CI $0.43{\sim}5.67$) for WC $80{\sim}89cm$ in women, and 8.08 (95%, CI $2.22{\sim}29.4$) for WC $\geq$ 90cm in females. These results remained significant after adjustment for age, BMI and fasting glucose concentrations at baseline in both sexes. Annual increment of more than 1 cm in WC was associated with the development of DM and impaired fasting glucose independently of age, sex, BMI, or presence of abdominal obesity. Conclusion : In Korean adults, abdominal obesity increased the risk for the development of type 2 diabetes and impaired fasting glucose. This result supports many other prospective studies suggesting abdominal obesity as a risk factor for type 2 diabetes.