• 한국음향학회지
• /
• 제19권8호
• /
• pp.63-67
• /
• 2000

본 논문에서는 화자인식의 성능향상을 위한 dynamic time warping (DTW) 기반의 문맥 제시형 화자인식에 대해 연구하였다. 화자인식에 있어 중요한 요소인 화자의 특성을 잘 반영할 수 있는 참조패턴을 생성하기 위해 유전자 알고리즘을 적용하였다. 또한, 문맥 종속형과 문맥 독립형 화자인식의 단점을 개선하기 위해 문맥 제시형 화자인식을 수행하였다. Clos set에서 화자식별과 open set에서 화자확인 실험을 하였으며 실험결과 기존 방법의 참조패턴을 이용하였을 경우보다 유전자 알고리즘에 의한 참조패턴이 인식률과 인식속도 면에서 우수함을 보였다.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.212-221
• /
• 2003

In order to reduce the lead-time and cost, the technology of rapid prototyping (RP) has been widely used. A new rapid prototyping process, transfer-type variable lamination manufacturing process by using expandable polystyrene foam (VLM-ST), has been developed to reduce building time, apparatus cost and additional post-processing. At the same time, VLM Slicer, the CAD/CAM software for VLM-ST has been developed. In this study, algorithms for accuracy improvement of VLM-ST, which include offset and overrun of a cutting path and generation of a reference shape are developed. Offset algorithm improves cutting accuracy, overrun algorithm enables the VLM-ST process to make a shape of sharp edge and reference shape generation algorithm adds additional shape which makes off-line lamination easier. In addition, proposed algorithms are applied to practical CAD models for verification.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.104-107
• /
• 1999

Tracking control of an arbitrary reference has been discussed for 7Th order 2-input 2-output non-minimum phase EGR/VGT diesel engines. To meet strict emission regulations and customer demands, the desired set points, the air-fuel ratio and the ERG flow fraction, determined from a static engine data based on engine speed and the desired fueling rate are transformed into the set points for the two sensor measurement outputs. Applying the sliding mode tracking control theory proposed by Jeong and Utkin, two step design was carried out using the bounded solution of an unstable zero dynamics for the given reference signals. This paper shows through simulations how stabilization of unstable zero dynamics and reference tracking can be accomplished simultaneously.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.386-388
• /
• 2007

In many applications of UAVs flying in low altitude, the steady supply of accurate height measurements is very important for the UAVs to complete their mission successfully. In order to do this, a barometer or GPS height measurements are widely used. However, because these two sensors have their limitations in the application environment, a method for fusing these two measurements to produce reference heights are required. In this paper, a reference height generation filter is designed for UAV(Unmanned Air Vehicle) applications. The barometer errors originated by the change of the atmospheric environment are modeled using random walk models, and then the errors are identified and compensated through the ZSB(zero-scan-back) filter algorithm using the GPS height measurements. The performance of the proposed filter is demonstrated by realistic simulations.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.235-240
• /
• 2006

In order to enhance receive sensitivity in noisy environment, the previous initial synchronization method of GPS receiver for reference stations adopts not only the coherent integration method but also the non-coherent integration method. However, the previous GPS initial synchronization method causes the non-coherent integration loss, which is a dominant factor among the signal acquisition losses in noisy environment. And the non-coherent integration loss increases with the strength of noise signal. In this pa-per, a GPS initial synchronization method is proposed to enhance receive sensitivity of GPS receiver for reference stations in noisy environment. This paper presents that the proposed GPS initial synchronization method suppresses the non-coherent integration loss. Furthermore, with regard to the mean acquisition time, it is shown that the number of the search cells of the proposed GPS initial synchronization method is much fewer than that of the previous GPS initial synchronization method.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.316-320
• /
• 2009

In this paper, a reference-free perceptual quality metric is proposed for image assessment. It measures the amount of overall blockiness and blurring in the image. And edge-oriented artifacts, such as ringing, mosaic and staircase noise are also considered. In order to give a single quality score, the individual artifact scores are adaptively combined according to the difference between the edge-oriented artifacts and other artifacts. The quality score obtained by the proposed algorithm shows strong correlation with the MOS values by VQEG.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 학술대회 논문집 전문대학교육위원
• /
• pp.141-145
• /
• 2001

In this paper, model reference PID genetic controller was proposed in order to overcome the difficulty of reflecting control performance required in the overall control system and defects of the adaptation performance in the PID genetic controller. The proposed controller comprised Inner feedback loop consisting of the PID controller and plant, and outer loop consisting of an genetic algorithm which was designed for tuning a parameter of the controller. A reference model was used for design criteria of a PID controller which characterizes and quantizes the control performance required in the overall control system. Tuning parameter of the controller is performed by the genetic algorithm. The performance of proposed algorithm was verified through experiment for the DC servo motor.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.145-152
• /
• 1995

A general stiffener element which includes transverse shear deformation(TSD) is formulated using the p-version of finite element method. Hierarchic C"-shape functions, derived from Integrals of Legendre polynomials, are used to define the assembled stiffness matrix of the stiffener and plate on the basis of 5 D.0.F displacement fields. The stiffness matrix for the stiffener with respect to the local reference frame is transformed to the plate reference system by applying the appropriate transformation matrices in order to insure compatibility of displacements at the junction of the stiffener and plate. The transformation matrices which account for the orientation and the eccentricity effects of the stiffener with respect to the plate reference axes are used to find local behavior at the junction of the stiffener and the relative contributions of the plate and stiffener to the strength of the composite system. The results obtained by the p-version of the finite element method are compared with the results in literatures, especially those by the h-version software, MICROFEAP-II.P-II.

• 한국농공학회지
• /
• 제40권1호
• /
• pp.43-48
• /
• 1998

In order to provide basic information for the estimation of evapotranspiration for grass (Joycia Japonica), both field lysimeter experiment and model prediction were performed to estimate daily ET Various methods were used to predict daily reference crop ET and crop coefficients. Measured mean daily ET during the 1997 growing season was 4.5mm Model predicted mean daily ET during the 1997 growing season varied from 3.6 to 4.7mm depending on the prediction model Crop coefficients varied from 0.96 to 1.27 depending on the prediction model Comparison of the seven reference crop ET prediction methods used in this study shows that the Penman-Monteith method gave the smallest ET while the Hargreaves method gave the largest ET. The crop coefficient by the corrected Penman method was 1.03, which is closest to 1.0, suggesting that this method may he the best prediction method.

• Journal of the Korean Data and Information Science Society
• /
• 제27권4호
• /
• pp.1091-1100
• /
• 2016

This paper considers the noninformative priors for the linear function of parameters in the lognormal distribution. The lognormal distribution is applied in the various areas, such as occupational health research, environmental science, monetary units, etc. The linear function of parameters in the lognormal distribution includes the expectation, median and mode of the lognormal distribution. Thus we derive the probability matching priors and the reference priors for the linear function of parameters. Then we reveal that the derived reference priors do not satisfy a first order matching criterion. Under the general priors including the derived noninformative priors, we check the proper condition of the posterior distribution. Some numerical study under the developed priors is performed and real examples are illustrated.