• Journal of The Korean Association For Science Education
• /
• v.25 no.4
• /
• pp.480-493
• /
• 2005

The development of modem technology made people more aware of the importance of science education, which was followed by research on textbooks based on the new curriculum. This study compared physics textbooks that were published after the new curriculum started in 2000 and 2002 in Korea and Japan, respectively, and aimed to become a reference for further improvement of science curriculum and textbook reform. The results were as follows : 1. The number of teaching topics in Korean science textbook is greater than those in Japan. 2. In detail, the field of physics appeared to be relatively more important in Korea's textbooks, while it was the field of biology that was given more weight in textbooks in Japan. 3. The textbooks in Korea and Japan covered in more detail the concepts of 'power and energy' and 'electricity and magnetism', respectively. 4. The textbooks in Korea introduced the contents of magnetism initially, whereas their counterparts in Japan, the contents of light. As a whole, the contents of the science textbooks in Korea and Japan were very similar. However, more detailed concepts were included in Korea's textbooks, and therefore, Korea's textbooks seemed to have richer contents than Japan.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2006

Lithium titanium oxide $(Li_4Ti_5O_{12})$ with spinel-framework structures as anode material for lithium-ion battery was prepared by sol-gel and high energy ball milling (HEBH) method. According to the X-ray diffraction (XRD), Particle Size Analyses(PSA) and scanning electron microscopy (SEM) analysis, uniformly distributed $Li_4Ti_5O_{12}$ particles with grain sizes of 100 nm were observed. Half cells, consisting of $Li_4Ti_5O_{12}$ as working electrode and lithium foil as both counter and reference electrodes showed the high performance of high rate discharge capacity and 173 mAh/g at 0.2C in the range of $1.0\sim2.5 V$. Furthermore, the crystalline structure of $Li_4Ti_5O_{12}$ didn't transform during the lithium intercalation and deintercalation process.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.10-20
• /
• 2007

For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.4
• /
• pp.789-798
• /
• 2009

In Sasang constitutional medicine, I have researched the process of visceral structure in the Eight Constitutionals under circulation of the five elements and the formation of primary source of illness. From this research, I could draw following conclusions through combination of the auxiliary psycho-formulas by applying the constitutional acupuncture therapy on the five elements diagnostic calculation. Since the arrangement for the five dimensions of organs in the eight constitutions has been formulated by circulation of the five elements in Sasang constitutions, if the five elements begin circulating count-clockwise from the reference point at the organs in Sasang constitutional medicine, the positive constitutional arrangement of organs is built up such as, the positive constitution of metal, earth, wood and water, while begin circulating clockwise, the negative constitutional arrangement of organs is formulated, such as the negative constitutions of metal, earth, wood and water. The source of illness results from imbalance of the organic force being generated by transfer of the five elements from compatibility to incompatibility when the five elements circulate. Hence, it has been acknowledged that if the source of illness comes from the strongest organ, it is the time when circulation of the five elements progresses from the second organ (the second strongest) in incompatibility, and if the source of illness comes from the weakest organ, it is the time when circulation of the five elements progresses from the third organ (the middle) in incompatibility. It is considered proper to diagnose meridians of the pericardium and the Triple Burners rather than to diagnose meridians of the heart and the small intestine which forms the visceral arrangement of the eight constitutions. For instance, the auxiliary psycho-formula obtains its prescription by attenuating the first organ (the strongest) while augmenting the fourth organ (the second weakest) when the axis of incompatibility in the five elements circulation crosses the second and the third organs, and it gets its prescription by attenuating the second organ(the second strongest) while augmenting the fifth organ(the weakest) when the axis of incompatibility in the five elements circulation crosses the third and the fourth organs. In addition, when medicating, the $4{\sim}5$ times of repeated performance can be assumed to represent the amount of an energy that each organ bears depending on the phase in the arrangement of the eight constitutional organs.

• Journal of Adhesion and Interface
• /
• v.21 no.3
• /
• pp.101-106
• /
• 2020

In this study, epoxy-modified acrylate was synthesized. The synthesized acrylate was added to the composition for sheet molding compound (SMC) in the range of 5 phr to 15 phr. The prepared SMC prepreg was molded at high temperature and pressure to produce a glass fiber reinforced composite. Physical properties such as tensile and impact strength of the composite were measured, respectively. Experimental data show that the composite with 5 phr of synthesized acrylate has 20% improved tensile strength and 12% improved impact strength than that of the reference sample.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.185-192
• /
• 2017

A sequence of earthquakes with the main shock $M_L$ 5.8 occurred on September 12 2016 in the Gyeongju area. The main shock was the largest earthquakes in the southern part of the Korean peninsula since the instrumental seismic observation began in the peninsula in 1905 and clearly demonstrated that the Yangsan fault is seismically active. The mean focal depth of the foreshock, main shock, and aftershock of the Gyeongju earthquakes estimated by the crustal model of single layer of the Korean peninsula without the Conrad discontinuity turns out to be 12.9 km, which is 2.8 km lower than that estimated based on the IASP91 reference model with the Conrad discontinuity. The distribution of the historical and instrumental earthquakes in the Gyeongju area indicates that the Yangsan fault system comprising the main Yangsan fault and its subsidiary faults is a large fracture zone. The epicenters of the Gyeongju earthquakes show that a few faults of the Yangsan fault system are involved in the release of the strain energy accumulated in the area. That the major earthquakes of Gyeongju earthquakes occurred not on the surface but below 10 km depth suggests the necessity of the study of the distribution of deep active faults of the Yangsan fault system. The magnitude of maximum earthquake of the Gyeongju area estimated based on the earthquake data of the area turns out to be 7.3. The recurrence intervals of the earthquakes over magnitudes 5.0, 6.0 and 7.0 based on the earthquake data since 1978, which is the most complete data in the peninsula, are estimated as 80, 670, and 5,900 years, respectively. The September 2016 Gyeongju earthquakes are basically intraplate earthquakes not related to the Great East Japan earthquake of March 11 2011 which is interplate earthquake.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.111-120
• /
• 2020

Remarkable scientific and technological achievements are mainly shown in the 'super-convergence' or 'convergence of convergence' among cross- disciplinary fields, and advanced countries are promoting the 'high-risk, high-return research' ecosystem. Google LLC is carrying out numerous new challenges in terms of a non-failure perspective. Innovative research by the US Defense Advanced Research Projects Agency (DARPA) has produced such breakthroughs as the Internet, GPS, semiconductors, the computer mouse, autonomous vehicles, and drones. China is pioneering a 'Moon Village' and planning the world's largest nuclear fusion energy and ultra-large particle accelerator project. Japan has also launched 'the moonshot technology development research system' to promote disruptive innovation. In Korea, the government is preparing a new research program to tackle the global scientific challenges. Therefore, it is necessary to determine the reasonable geoscientific challenges to be addressed and to conduct a preliminary study on these topics. For this purpose, it is necessary to conduct long-term creative research projects centered on young researchers, select outstanding principal investigators, extract innovative topics without prior research or reference, simplify research proposal procedures, innovate the selection solely based on key ideas, and evaluate results by collective intelligence in the form of conferences.

• The Journal of Engineering Geology
• /
• v.30 no.1
• /
• pp.43-57
• /
• 2020

The objective of this study was to evaluate the performance of high-strength lattice girders as a possible superior alternative to conventional steel arch ribs. For this purpose, the structural characteristics of supports were analyzed using numerical analysis, and their performance was evaluated using maximum bending load tests and tensile tests of the welded joint. According to the results of structural analysis, the optimum size of the upper and lower members and plates is 50 mm × 31.8 mm × 25.4 mm, demonstrating excellent functionality and economic efficiency. High-strength lattice girders of dimensions 55 mm × 30 mm × 20 mm and 85 mm × 30 mm × 20 mm, determined from bending load tests, are found to meet both the reference values and the target values of H-profiles 100 and 125. A review of the ratio of theoretical deflection to actual deflection shows that the high-strength lattice girder developed during this study meets fewer than five of the evaluation criteria for lattice girder deflections proposed by the Federal Railway Department of Germany. Finally, tensile test results reveal that the welded joint of the high-strength lattice girder at the main steel bar-auxiliary steel bar-plate junction exceeds the target value, indicating that the welded joint has sufficient stability.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.27-37
• /
• 2013

A roof surface temperature monitoring, utilizing remotely sensed thermal infrared image has been specifically proposed to explore evidential data for heating load in winter by cool roof. The remotely sensed thermal infrared image made it possible to identify area-wide patterns of changing trends of surface temperature according to rooftop color (white, black, blue, green) which cannot be acquired by traditional field sampling. The temperature difference of cool roof having a higher solar reflectance were ranged from $3^{\circ}C$ up to $9^{\circ}C$, compared to the general roofs. It is confirmed that there is a significant potential to the energy saving by introducing the cool roof in a Korean climate since up to $18.46^{\circ}C$ difference in cool roof, compared to the general roofs in summer were already identified in Seoul, South Korea. It is anticipated that this research output could be used as a valuable reference in identifying heating load in winter by cool roof since an objective monitoring has been proposed based on the area-wide measured, fully quantitative performance of remotely sensed thermal infrared image.

• Journal of Nutrition and Health
• /
• v.40 no.sup
• /
• pp.9-21
• /
• 2007

This study aimed to assess the total sugar intake for Korean and to identify major food sources contributing to those food components. Korean adults aged over 20 years old from the Korean National Health and Nutrition Examination Survey (KNHANES) 2001 and 2002 were selected. The data were analyzed to obtain nationally and seasonally representative information on the health and nutritional status of the Korean. Forty food groups were used in identifying food sources of total sugar and energy intake. Total sugar contents of foods in the KNHANES data sets were estimated by food code matching technique with Release 18 of the USDA National Nutrient Database for Standard Reference. Sample weighted means, standard errors, and population percentages were calculated using SAS and SUDAAN. The mean total sugar intake of the Korean was 60.3g in 2001, 40.9g in spring 2002, 45.7g in summer 2002, and 52.1g in fall 2002, which were 30-44% of intake of US people. Fresh fruit was identified as the most significant food source for total sugar intake in Korean population in all age groups and all seasons. The next major food sources following fresh fruits were candy/jelly/syrup/honey, coffee/coffee caream, vegetables, Kimchi, soft drinks, milk, fruit juice, cookie/cracker/cake, and vegetable juice/grain juice, which showed similar results through the seasons. While carbonated soft drink was the most significant food sources for total sugar or added sugar intakes for US people. The total sugar intakes were significantly higher in women, higher educational level, and residing in metropolitan area. As intake of total sugar increased, intakes of protein, fiber, calcium, phosphorus, iron, Vit A, B1, B2, C, niacin showed significantly increased, while high intakes of added sugars showed low intakes of some micronutrients in the US people. Percentages of people who consumed nutrients below EAR were less in higher total sugar intake group than in lower intake group. From these results, we can conclude that the food consumption habits including the total sugar intake of Korean people seems relatively good so far. More reliable database of total sugar and added sugar composition tables in public domain should be established in the future, and also more researches about total sugar and added sugar for Koreans should be continued.