• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.284-291
• /
• 1995

This paper proposes a method for determination of optimal reference spectrum in random vibration control. The least square method is used to minimize the spectrum deviation between the specified reference spectrum and spectra at the specimen-mounted points. This method needs only the measured FRF's at the control point and specimen-mounted points in pre-vibration test. Using the proposed method as reference spectrum, it is possible to easily predict spectra at the specimen-mounted points, and also to reduce overtest resulting from dynamic characteristics of shaker and fixture. This method is shown through theoretical and experimental results to be an effective method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.465-470
• /
• 2010

The charge pump in a phase-locked loop is a key block in determining reference spurs of the VCO output signal. To reduce reference spurs, the current mismatch in the charge pump must be minimized. This paper presents a dual compensation method to reduce the current mismatch. The proposed charge pump and PLL were realized in a $0.18{\mu}m$ CMOS process. Measured current matching characteristics were achieved with less than 1.4% difference and with the current variation of 3.8% in the pump current over the charge pump output voltage range of 0.35-1.35V at 1.8V. The reference spur of the PLL based on the proposed charge pump was measured to be -71dBc.

• Journal of Information Processing Systems
• /
• v.14 no.3
• /
• pp.631-644
• /
• 2018

Many studies on flash memory-based buffer replacement algorithms that consider the characteristics of flash memory have recently been developed. Conventional flash memory-based buffer replacement algorithms have the disadvantage that the operation speed slows down, because only the reference is checked when selecting a replacement target page and either the reference count is not considered, or when the reference time is considered, the elapsed time is considered. Therefore, this paper seeks to solve the problem of conventional flash memory-based buffer replacement algorithm by dividing pages into groups and considering the reference frequency and reference time when selecting the replacement target page. In addition, because flash memory has a limited lifespan, candidates for replacement pages are selected based on the number of deletions.

• Advances in concrete construction
• /
• v.9 no.6
• /
• pp.547-556
• /
• 2020

This study aimed to develop reference materials (RMs) that are chemically stable and can simulate the flow characteristics of cement paste. To this end, the candidate components of RMs were selected considering the currently required properties of RMs. Limestone, slag, silica, and kaolin were selected as substitutes for cement, while glycerol and corn syrup were selected as matrix fluids. Moreover, distilled water was used for mixing. To select the combinations of materials that meet all the required properties of RMs, flow characteristics were first analyzed. The results revealed that silica and kaolin exhibited bilateral nonlinearity. When an analysis was conducted over time, slag exhibited chemical reactions, including strength development. Moreover, fungi were observed in all mixtures with corn syrup. On the other hand, the combination of limestone, glycerol, and water exhibited a performance that met all the required properties of RMs. Thus, limestone, glycerol, and water were selected as the components of the RMs. When the influence of each component of the RMs on flow characteristics was analyzed, it was found that limestone affects the yield value, while the ratio of water and glycerol affects the plastic viscosity. Based on this, it was possible to select the mixing ratios for the RMs that can simulate the flow characteristics of cement paste under each mixing ratio. This relationship was established as an equation, which was verified under various mixing ratios. Finally, when the flow characteristics were analyzed under various temperature conditions, cement paste and the RMs exhibited similar tendencies in terms of flow characteristics. This indicated that the combinations of the selected materials could be used as RMs that can simulate the flow characteristics of cement paste with constant quality under various mixing ratio conditions and construction environment conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.639-643
• /
• 2018

As electronic systems become smaller and more portable, the need for power conversion continues to increase. In addition, system stability must be ensured from switching noise due to power conversion efficiency and power conversion system miniaturization. Therefore, countermeasures to reduce switching noise during power conversion are essential. In this paper, a DC/DC buck converter circuit is constructed, and the characteristics of switching noise generated when changing the parts layout in a four-layer printed circuit board (PCB) structure with a reference plane are compared and analyzed. In addition, switching noise characteristics were compared and analyzed through simulations when the parts layout was different in a two-layer PCB structure from which the reference planes were removed. As a result, it was confirmed that the radiated emissions characteristic is reduced by 12dB and the conducted emissions characteristic decreased by 7dB to 8dB, according to the current return path in the four-layer PCB structure. Thus, it was confirmed that the noise characteristics can be improved according to the configuration of the current return path when the power conversion circuit is designed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.765-769
• /
• 2011

The existing portable reference equipment for ITS systems performance evaluation has several limitations. First, it is difficult to set up and operate the equipment in the road section with the shoulder width equal to or smaller than 1.5m. Secondly, the crash with a car could lead to severe accident since it is big and heavy. Lastly, it cannot collect data from multiple lanes at a time. In this research the characteristics of the USN-based portable reference equipment developed to overcome shortcomings of the existing portable reference equipment were analyzed qualitatively and its performance level was evaluated through the field test. Consequently, the USN-based portable reference equipment turned out to overcome the operational shortcomings and satisfy the performance level required for the portable reference equipment.

• The Journal of Information Systems
• /
• v.18 no.2
• /
• pp.35-59
• /
• 2009

The study of Information Systems(IS) is a relatively new discipline area, thus an analysis of the latest research literature could be useful to identify what the researchers are doing and what can be done to improve our discipline. With that purpose in mind, this study analyzes the total 208 articles published in "The Journal of Information Systems~ between 2001 and 2008. The classification system that comprises three key characteristics of diversity (research topic, research method, and reference discipline) was developed based on a review of prior literature. The results of this study were also compared with Kim et al.(2005)'s and Vessey et al.(2002)'s results to identify issues in current Information Systems research and 10 suggest some recommendations for future In formation Systems research. The findings identify popular research topic:s, the dominant research method, and reference discipline. The popular research topics consists of organizational concepts, problem domain-specific concepts, and systems/software management concepts. Field study was characterized as the dominant research method in the papers included in the study. Information Systems itself represents the major theoretical reference of the studies. However, many papers in this study relied on a number of reference disciplines., none of which was dominant, or they did not rely on a specific reference discipline. Finally, this study suggests more research on the disciplinary issues, more training on the research method, more accurate and specific reference discipline, and controlled diversity.

• Journal of the Korean Society for information Management
• /
• v.26 no.3
• /
• pp.89-110
• /
• 2009

In this research, we attempt to discuss about the subject reference service from a marketing point of view, especially from a perspective of customer relationship management(CRM), and examine how this service actually functions to build the relationships with users of academic libraries, especially with faculty members. To carry out the research, a focus group interview was conducted with subject specialists, and also individual in-depth interviews with faculty members. In addition, we also discuss about characteristics of subject specialists which affect the relationship with the faculty members in a college environment. This study is meaningful as it discussed purposes of and characteristics in subject reference service from user' viewpoint and the perspective of CRM.

• Convergence Security Journal
• /
• v.6 no.4
• /
• pp.91-99
• /
• 2006

Generally, a study of web caching is conducted on a performance improvement with structural approaches and a new hybrid method using existing methods, and studies on caching method itself. And existing analysis of reference-characteristic are conducted on a history analysis and a preference of users, a view point of data mining by log analysis. In this study, we analyze the reference-characteristic of web object on a view point of a characteristic of probability-distribution and a mean value of lifetime of a web-object. And using this result, we propose the new method for a performance improvement of a web-caching.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.1
• /
• pp.55-62
• /
• 2015

This study aims to present a hydraulic transitory study as MOC applications for solving the Saint-Venant equations in two case studies: 1) in a penstock of a small hydropower system as a simple pipeline in the case of valve-closure in the downstream boundary with a reservoir in the upstream boundary; and 2) for discharge propagation into a channel by velocity and depth of the flow channel along space evaluation. The proposed methodology by Chaudry [5] concerning the development of hydrodynamic models was used. The obtained results for first and second case study has been confirmed that MOC numerical approach is useful for several engineering purposes, including cases of hydraulic transients and discharge propagation in hydraulic systems.