• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.530-536
• /
• 2021

Since the LBP algorithm has the characteristic of local texture expression, it is possible to obtain completely different results depending on the extraction location and the size of the reference image and the sample image. In order to solve these shortcomings, in this paper, we first investigate the basic characteristics of LBP, make the size of the reference image (100×100) in order to include most of the characteristics in the image, and select a sample image (40×40) extracted from an arbitrary point. After finding the matching position in the LBP of the reference image by using the correlation test between the LBP of the reference image and the LBP of the sample image, a chi analysis method is used to find the reference image that most closely matches the sample image.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.740-743
• /
• 1997

Reference models are used in many control algorithms for improvement of transient response characteristics. They provide desired trajectories that the plant should follow. Most control systems have bounded control inputs to avoid saturation of the plant. If we design reference models that do not account for limits of control inputs, control performance of the system may be deteriorated. In this paper, therefore, the way of determining variable reference models for TDC(time delay control) technique is proposed. The variable reference model is determined based on the information of bounded control inputs and reference inputs. This proposed method is also verified by application to the position control experiment using the BLDC motor.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.439-442
• /
• 2007

A solid state Hg(Au)/HgO reference electrode was prepared utilizing gold amalgam solid particles. Solid fine powder of the gold amalgam was prepared by chemical reduction of Au(III) with NaBH4 followed by reduction of Hg(II) in the presence of gold fine particles. The solid content in the suspension of the gold amalgam particles and fine mercury oxide particles in DMF containing PVC was precipitated by the addition of a large amount of water to give solid Hg(Au)/HgO/PVC mixture. After drying, the mixture was pressure-molded to a physically stable Hg(Au)/HgO composite reference electrode material. The electrochemical characteristics of the electrode as a reference electrode were very similar to an ordinary Hg/HgO reference electrode. The electrode material can be molded and fabricated in any desired shape and size. The surface can be renewed by a simple polishing process whenever contaminated or deactivated. The applicability of the electrode in the electrochemical detection of carbohydrates after anion exchange separation was evaluated.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.689-700
• /
• 2022

In the present study, iodine-131 S values (r_T ← thyroid) were calculated for 30 target organs and tissues using the most recently developed Korean reference computational phantoms. The calculated S values were then compared with those of the International Commission on Radiological Protection (ICRP) reference computational phantoms to investigate the dosimetric impact of the Korean S values against those of the ICRP reference phantoms. The results showed significant differences in the S values due to the different anatomical/morphological characteristics between the Korean and ICRP reference phantoms. Most target organs/tissues showed that the S values of the Korean reference phantoms are lower than those of the ICRP reference phantoms, by up to about 4 times (male spleen and female thymus). Exceptionally, three target organs/tissues (gonads, thyroid, and extrathoracic region) showed that the S values of the Korean reference phantoms are greater, by 1.5-3.7 times. We expect that the S values calculated in the present study will be beneficially used to estimate organ/tissue doses of Korean patients under radioiodine therapy.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.70-75
• /
• 2023

With the recent proliferation of memory-intensive workloads such as deep learning, analyzing memory access characteristics for efficient memory management is becoming increasingly important. Since read and write operations in memory access have different characteristics, an efficient memory management policy should take into accountthe characteristics of thesetwo operationsseparately. Although some previous studies have considered the different characteristics of reads and writes, they require a modified hardware architecture supporting read bits and write bits. Unlike previous approaches, we propose a software-based management policy under the existing memory architecture for considering read/write characteristics. The proposed policy logically partitions memory space into the read/write area and the write area by making use of reference bits and dirty bits provided in modern paging systems. Simulation experiments with memory access traces show that our approach performs better than the CLOCK algorithm by 23% on average, and the effect is similar to the previous policy with hardware support.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.418-423
• /
• 1992

In this paper, a model reference adaptive control algorithm is applied to the design of the normal acceleration controller for missiles with nonminimum-phase characteristics. The method used in this paper is due to Ohkubo. In this scheme, a feedforward compensator is designed first so that the extended system becomes minimum-phase and after that an adaptive control algorithms is designed for the extended system. The feedforwrd compensator is obtained by solving the robust stabilization problem. It is shown that the performance of the designed controller is satisfied via computer simulation.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.10
• /
• pp.425-430
• /
• 2003

A CMOS Voltage-Controlled Oscillator(VCO) for application at temperature stable system is designed. The VCO consists of bandgap voltage reference circuit, comparator, and voltage-to-current converter and the VCO has a temperature stable characteristics. The difference between simulated and calculated values is less than about 5% in output characteristics when the input voltage range is from 1V to 3.25V. The CMOS VCO has error less than about $\pm$0.85% in the temperature range from $-25^{\circ}C$ to $75^{\circ}C$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.12
• /
• pp.777-784
• /
• 1999

Since the ultra-high voltage power apparatus are recommended to withstand switching surge generated from the electric power system, the switching impulse voltage is generally used to verify this requirement at the testing laboratories. Recently, the international standard(IEC 60060-2) related to the high voltage measurement techniques is revised requiring a traceability of measuring system for high voltage measurements. In this paper, a reference divider for switching impulse voltage is developed satisfying the revised. IEC standard and the possibility of applications has been investigated. Therefore, the characteristics of the high and low voltage side resistor and the shielding ring have been analyzed including the step response characteristics of the prototype divider. Throughout various efforts, it is confirmed that our measuring device has shown compatible characteristics as a reference divider.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2345-2350
• /
• 2014

In this paper, measurement methods for the characteristics of antennas for indoor digital TV (DTV), having 75-ohm port impedance, are introduced. Reference impedance of typical radio frequency (or microwave) systems and measurement equipments is 50 ohm. However, the reference impedance of antennas for indoor DTV is 75 ohm, and the characteristics of the antennas cannot be measured directly using the measurement equipments. Measurement methods, using test equipments with reference impedance of 50 ohm, for the characteristics(impedance, radiation patterns, and gain) of antennas designed to fit for 75 ohm port are introduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.45-46
• /
• 2014

In this paper, measurement methods for the characteristics of antennas for indoor digital TV (DTV), having 75-ohm port impedance, are introduced. Reference impedance of typical radio frequency (or microwave) systems and measurement equipments is 50 ohm. However, the reference impedance of antennas for indoor DTV is 75 ohm, and the characteristics of the antennas cannot be measured directly using the measurement equipments. Measurement methods, using test equipments with reference impedance of 50 ohm, for the characteristics(impedance, radiation patterns, and gains) of antennas designed to fit for 75 ohm port are introduced.