• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.321-324
• /
• 1997

In this paper, Active Noise Control(ANC) algorithm is proposed based on the estimated frequency estimator of the reference signal. The conventional feedforward ANC algorithms should measure the reference and use it to calculate the gradient of the squared error and filter coefficients. For ANC systems applied to aircrafts and passenger ships, engines from which reference signal is usually measured is so far from seats where main part of controller is placed that the scheme might be difficult to implement or very costly. Feedback ANC algorithm which doesn't need to measure the reference uses the error signal to update the filter and is sensitive to unexpected transient noise like a sneeze, clapping of hands and so on The proposed algorithm estimates frequencies of the desired signal in real time using adaptive notch filter. New frequency estimation algorithm is proposed with the improved convergence rate, threshold SNR and computational simplicity. Reference is not measured but created with the estimated frequencies. It has strong similarity to the conventional feedback control because reference is made from error signal. Enhanced error signal is used to update the controller for better performance under the measurement noise and impact noise. The proposed ANC algorithm is compared with the conventional feedback control.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.11
• /
• pp.1777-1784
• /
• 2001

This paper provides d simplified engineering J estimation method fur semi-e1liptical surface cracked plates in tension, based on the reference stress approach. Note that the essential element of the reference stress approach is the plastic limit lead in the definition of the reference stress. However, for surface cracks, the definition of the limit load is ambiguous ("local" or "global"limit lead), and thus the most relevant limit load (and thus reference stress) for the J estimation should be determined. In the present work, such limit load solution is found by comparing reference stress bated J results with those from extensive 3-D finite element analyses. Validation of the proposed equation against FF J results based on tactual experimental tensile data of a 304 stainless steel shows excellent agreements not only far the J values at the deepest point but also for those at an arbitrary paint along the crack front, including at the surface point. Thus the present results provide a good engineering tool for elastic-plastic fracture analyses of surface cracked plates in tension.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.241-249
• /
• 2010

Companies and consumers are highly interested in online activities such as word-of-mouth(W.O.M) as marketing paradigm moved to online context. In this study, the research identified major variables affecting product review reference rate online and analyzed the difference based on those variables. According to the results, remarkable differences were discovered in four variable such as 'brand reference', 'review symbol', 'affirmation' and 'information offering'. In addition, the researcher found 'brand reference' and 'information offering' are most important factors deciding review reference rate using regression tree analysis method. Based on the results, the practical implications and further research directions for utilizing consumer online W.O.M were discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.3
• /
• pp.289-293
• /
• 2013

In the noncoherent methods for UWB-IR (ultra-wideband impulse radio), block coded modulation (BCM) is better than the transmitted reference (TR) systems in terms of the energy efficiency and data rate. However, even BCM suffers from the performance degradation in the presence of strong inter-frame interference and inter symbol interference. We propose the transmitted reference based on the BCM (TR-BCM) which is the hybrid system of TR and BCM. Performance evaluation shows that the performance of TR-BCM is better than that of BCM in the high SNR range.

• Information Systems Review
• /
• v.5 no.2
• /
• pp.183-202
• /
• 2003

In this paper, we designed an interoperability evaluation system based on technical reference model, HanTRM (Technical Reference Model) and the information technology architecture methodology, TAProcess (Technical Architecture Process). TAProcess provides standardized procedure and methodology for the efficient installation, management and operation of information technology. HanTRM can be used as a referencial basic framework for all organizations which are starting to make technical reference model. We propose a method that utilize HanTRM and a procedure that evaluates interoperability between information systems to design interoperbility evaluation system. So, this interoperbility evaluation system will be more usefully applied to organizations.

• The Korean Journal of Cytopathology
• /
• v.15 no.2
• /
• pp.86-91
• /
• 2004

Liquid-Based Uterine Cervicovaginal Cytology is known to be a sensitive and effective screening method for cervical neoplasm $MonoPrep^{TM},\;ThinPrep^{TM},\;and\;SurePath^{TM}$ methods have been recently used as Liquid-Based Uterine Cervicovaginal Cytology techniques, and the $SurePath^{TM}$ method has been used in Sung-Yoon Reference Laboratory since 2003. The goal of Liquid-Based Uterine Cervicovaginal Cytology is to separate cervical epithelial cells from non-target cells, red blood cells and neutrophils. This report describes a study which evaluated cellularity, stainablilty, and cellular changes of epithelial cels in samples processed using a manual technique as compared to samples processed using $SurePath^{TM}$ automated method. The samples processed by means of a manual technique contained a cellularity of epithelial cells similar to that of the samples processed using the $SurePath^{TM}$ automated method. In addition, we compared variable density gradient reagents, including dextran, dextrose, and sucrose, to $SurePath^{TM}$ gradient media in order to evaluate cell fractionation and cellularity of epithelial cells. 10% dextran of gradient media shows good fractionation. The samples processed with 10% dextran demonstrated sufficient cellularity of epithelial cells and shows the fewest cellular changes. In conclusion, using a manual technique on these samples is easier to read than those results obtained using the $SurePath^{TM}$ automated method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.611-614
• /
• 2007

In this paper, a Direct Learning Control (DLC) method is presented to generate a virtual reference input for linear feedback systems to improve the output tracking performance. The original reference input is effectively modified by the DLC without any iterative learning process. The presented DLC is designed based on the information on the relative degree of a system and previously generated virtual reference inputs. It is illustrated by simulations that the virtual reference input generated by the proposed DLC can achieve high tracking performance, although the reference input cannot be appropriately shaped by using existing DLC methods.

• Journal of the Korean Statistical Society
• /
• v.33 no.2
• /
• pp.203-218
• /
• 2004

In this paper, we develop the matching priors and the reference priors for linear combination of the means under the normal populations with equal variances. We prove that the matching priors are actually the second order matching priors and reveal that the second order matching priors match alternative coverage probabilities up to the second order (Mukerjee and Reid, 1999) and also, are HPD matching priors. It turns out that among all of the reference priors, one-at-a-time reference prior satisfies a second order matching criterion. Our simulation study indicates that one-at-a-time reference prior performs better than the other reference priors in terms of matching the target coverage probabilities in a frequentist sense. We compute Bayesian credible intervals for linear combination of the means based on the reference priors.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.575-578
• /
• 2004

The performance of an active power filter(APF) depends on the inverter characteristic, the control method, and the accuracy of reference signal generator. The accuracy of reference generator is the most critical item to determine the performance of active power filter. This paper introduces a novel reference signal generator composed of improved adaptive predictive filter. The performance of proposed reference signal generator was first verified through a simulation with MATLAB. Furthermore, the application of feasibility was evaluated through experimenting with a single-phase APF prototype based on the proposed reference generator, which was implemented using the TMS320C31 floating-point signal processor. Both simulations and experimental results confirm that our reference signal generator can be used successfully in practical active power filters.

• Nuclear Engineering and Technology
• /
• v.31 no.6
• /
• pp.23-38
• /
• 1999

This study addresses the reference spent fuel and its characteristics for developing a geological repository concept. As a disposal capacity of the reference repository system to be developed, spent fuel inventories were projected based on the basis of the Nuclear Energy Plan of the Long-term National Power Program. The reference spent fuel encompassing a variability in characteristics of all existing and future spent fuels of interest was defined. Key parameters in the reference fuel screening processes were the nuclear and mechanical design parameters and the burnup histories for existing spent fuels as of 1996 and for future spent fuels with the more extended burnup the initial enrichment and its expected turnup. The selected reference fuel was characterized in terms of initial enrichment, bumup, dimension, gross weight and age. Also the isotopic composition and the radiological properties are quantitatively identified. This information provided in this study could be used as input for repository system development and performance assessment and applied in fuel material balance evaluation for the various types of back-end fuel cycle studies.