• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1770-1771
• /
• 2011

In mission planning of UAV applications, especially for the missions requiring height transitions, it is required to generate reference flight trajectories considering the performances of the engine installed in the UAV. Even though the vertical line following guidance based height transition trajectory generation method has been developed to build reference height transition trajectories easily, it is not adequate for considering engine performances effectively since many engine characteristics and performances have conventionally been described in the V-H(speed-height) plane which is not the very space where the UAVs are actually flying. In this paper, we derive the trajectories in V-H plane for the vertical line following flights. And based on the results, a new algorithm to design the reference height transition trajectories for UAV applicaions. Simulation results demonstrate that the proposed algorithm is very effective and easily applicable.

• Journal of Power Electronics
• /
• v.8 no.3
• /
• pp.268-274
• /
• 2008

This paper presents a proposed position controller for a vector controlled induction motor. The position controller design depends on the rotational motion equations and a classical speed controller (CSC) performance. The CSC is designed to have the ability to track variable reference inputs and to provide a predefined system performance. Standard position controller in industry is presented to analyze its performance and its drawbacks. Then the proposed position controller is designed, based on the well defined rotational motion equations. The proposed position controller and the CSC are applied to control the position and speed of the vector controlled induction motor with different ratings. Simulation results at different operating conditions are presented to evaluate the proposed controllers' performance. The results show that the CSC can drive the motor with a predefined speed performance and can track a variable reference speed with an approximately zero steady state error. The results also show that the proposed position controller has the ability to effect high-precision positioning in a limited time and to track a variable reference position with a zero steady state error.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2399-2410
• /
• 2017

In this paper, a linear matrix inequality-based sampled-data fuzzy observer design method is proposed based on the exact discretization approach. In the proposed design technique, a numerically relaxed observer design condition is obtained by using the discrete-time fuzzy Lyapunov function. Unlike the existing studies, the designed observer is robust to the uncertain premise variable because the fuzzy observer is designed under the imperfect premise matching condition, in which the membership functions of the system and observer are mismatched. In addition, we apply the proposed method to the state estimation problem of the attitude and heading reference system (AHRS). To do this, we derive a Takagi-Sugeno fuzzy model for the AHRS system, and validate the proposed method through the hardware experiment.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.8-13
• /
• 2001

In the turning process, the feed is usually selected by a machining operator considering workpiece, cutting tool and depth of cut. Even if this selection can avoid power saturation or tool breakage, it is usually conservative compared to the capacity of the machine tools and can reduce the productivity significantly. This paper proposes a selection method of the feed and the reference cutting force based on MRR(material removal rate), maximum spindle power and specific energy. In order to estimate and control cutting force accurately in transient and steady state, this study utilizes a synthesized cutting force estimation method and a Fuzzy controller. The experimental results present that these systems can be useful for the FMS(flexible manufacturing system) and unmanned automation system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1446-1452
• /
• 2002

In the turning process, the feed is usually selected by a machining operator considering workpiece, cutting tool and depth of cut. Even if this selection can avoid power saturation or tool breakage, it is usually conservative compared to the capacity of the machine tools and can reduce the productivity significantly. This paper proposes a selection method of the feed and the reference cutting force based on MRR(material removal rate), maximum spindle power and specific energy. In order to estimate and control cutting force accurately in transient and steady state, this study utilizes a synthesized cutting force estimation method and a Fuzzy controller. The experimental results show that these systems can be useful for the unmanned turning process.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.63-67
• /
• 2000

This paper deals with text-prompt speaker recognition based on dynamic time warping (DTW). The Genetic Algorithm was applied to the creation of reference patterns for suitable reflection of the speaker characteristics, one of the most important determinants in the fields of speaker recognition. In order to overcome the weakness of text-dependent and text-independent speaker recognition, the text-prompt type was suggested. Performed speaker identification and verification in close and open set respectively, hence the Genetic algorithm-based reference patterns had been proven to have better performance in both recognition rate and speed than that of conventional reference patterns.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.533-541
• /
• 2008

In distributed mobile systems, the congestion control and disconnection problems are current major issues. This paper proposes a grouping-based fuzzy reference streaming method to improve the performance of systems supporting distributed mobile transactions. The proposed method resolves transaction requests issued by mobile clients using the GS interface. In the paper disconnection problems are resolved efficiently using transaction read and update for improved streaming service. Experimental results show that the proposed method outperforms the other existing methods significantly.

• Nuclear Engineering and Technology
• /
• v.33 no.5
• /
• pp.539-546
• /
• 2001

Systematic procedure of developing radionuclide release scenarios was established based on FEP list and Interaction Matrix for near-surface LILW repository. FEPs were screened by experts＇review in terms of domestic situation and combined into scenarios on the basis of Interaction Matrix analysis. Under the assumption of design scenario, The system domain was divided into three sections: Near-field, Far-field and Biosphere. Sub-scenarios for each section were developed, and then scenarios for entire system were built up with sub-scenarios of each section. Finally, sixteen design scenarios for near-surface repository were evaluated A reference scenario and other noteworthy scenarios were selected through experts＇scenario screening.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.102-109
• /
• 2000

In this industrial induction motor speed and torque controlled drive system, the closed loop control usually requires the measurement of speed or position of amotor. However a sensorless drive of an induction motor has several advantages ; low cost and mechanical simplicity. Thus this paper investigates a field oriented control method without speed and flux sensors. The proposed control strategy is based on the Model Reference Adaptive System(MRAS) using a new flux estimator which replaces integrators with two lag circuits as the reference model. This algorithm may overcome several shortages of conventional MRAS such as integrator problems, small EMF at low speed. The simulation and experimental results indicate good speed responses.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.11-16
• /
• 1998

In this paper, simultaneous estimation of rotor speed and time constant for a voltage source inverter (VSI) fed induction motor drive are disccussed. The theory is based on the Model Reference Adaptive System (MRAS). The identifier executes Simultaneous rotor speed and time constant so that vector control of the induction may be achieved in the rotor-flux oriented reference frame. Furthermore, to eliminate the offset error caused by the change in the stator resistance, a fuzzy resistance regulator is also designed which operates in parallel with the rotor speed and time constant identifier