Browse > Article
http://dx.doi.org/10.3795/KSME-A.2002.26.7.1446

Unmanned Turning Process Control Based on Spindle-Motor Power Characteristics  

Pak, Chang-Ho (한양대학교 대학원 정밀기계공학과)
Hong, Sung-Hahm (한양대학교 대학원 정밀기계공학과)
Lee, Byeong-Huee (산업자원부 기술표준원)
Huh, Kun-Soo (한양대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.26, no.7, 2002 , pp. 1446-1452 More about this Journal
Abstract
In the turning process, the feed is usually selected by a machining operator considering workpiece, cutting tool and depth of cut. Even if this selection can avoid power saturation or tool breakage, it is usually conservative compared to the capacity of the machine tools and can reduce the productivity significantly. This paper proposes a selection method of the feed and the reference cutting force based on MRR(material removal rate), maximum spindle power and specific energy. In order to estimate and control cutting force accurately in transient and steady state, this study utilizes a synthesized cutting force estimation method and a Fuzzy controller. The experimental results show that these systems can be useful for the unmanned turning process.
Keywords
Reference Cutting Force; Reference Feed; Spindle Motor Power; Fuzzy Logic Control;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Pak Changho, Kim Jaeok, Huh Kunsoo, 1999, 'Model-Based Monitoring of the Turning Force ,' Proc. KSMTE, pp. 11-15
2 Kim Jaeok, Huh Kunsoo, 2000, 'Turning Force Control Based on the Estimated Cutting Force,' Journal of the KSPE, Vol. 17, No.5, pp. 173-179
3 Kalpakjian, Serope, Steven R. Schmid, 2001, Manufacturing Engineering and Technology, 4th Ed. Prentice- Hall
4 Li-Xin Wang, 1997, A Course in Fuzzy Systems and Control, Prentice-Hall
5 Spiewak, S.A., 1995, 'Acceleration based Indirect Force Measurement in Metal Cutting Processes,' Int. J. Machine Tools Manufacturing., Vol. 35, No. 1, pp. 1-17   DOI   ScienceOn
6 Shiraish, M. and Aoshima, S., 1997, ' Sensorless Inprocess Measurement of Instantaneous Depth of Cut and Cutting Force in Turning,' Proc. American Control Conf., pp. 155-159
7 Stein, J.L. and Wang, C.H., 1990, 'Analysis for Power Monitoring on AC Induction Drive Systems,' Transaction of ASME Journal of Dynamic Systems, Measurement and Control, Vol. 112, pp. 239-248, June   DOI
8 Stein, J.L and Huh, K., 1992, 'A Model-Based Monitor Design For Estimating the Cutting Force In A Lathe,' ASME Winter Annual Conference
9 Huh, K., Jung, J. and Lee, K., 1998, 'A Cutting Force Monitoring System based on AC spindle Drive,' Proceedings of the American Control Conference, pp. 3013-3017   DOI
10 Koren, Y, 1997, 'Control of Machine Tools,' Journal of Manufacturing Science and Engineering, Vol. 119, pp. 749-753   DOI   ScienceOn
11 Tlusty, J. and Andrew, G.C., 1983, 'Acritical Review of Sensors for Unmanned Machining,' Annals of the ClRP, Vol. 32,No. 2, pp. 563-572   DOI   ScienceOn
12 Week. M., 1983, 'Machine Diagnostics in Automated Production,' Journal of Manufacturing Systems, Vol. 2, No.2, pp. 101-106   DOI
13 Meng, Q., Arsccularatnc, J. A. and Mathcw., P., 2000, 'Calculation of Optimum Cutting Conditions for Turning Operations using a Machining Theory,' Int. J. of Machine Tools and Manufacture, Volume 40, Issue 12, , Pages 1709-1733   DOI   ScienceOn
14 Arezooa. 8., Ridgwayb, K. and Al-Ahrnaric, A. M. A., 2000, 'Selection of Cutting Tools and Conditions of Machining Operations using an Expert System,' Computers in Industry, Volume 42, Issue 1, Pages 43-58   DOI   ScienceOn
15 Datsko, J., 1978, Material Properties and Manufacturing Processes, Jone Wiley & Sons, Inc
16 Nair, R .. , Danai, K., and Malkin, S., 1990, 'Turning Process Identification Through Force Transients,' Automation of Manufacturing Processes, The Winter Annual Meeting of thc ASME, Dallaas, Texas, pp. 59-66