• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.139-141
• /
• 2008

This paper presents a PID controller and PI-PI dual loop controller for a single-phase inverter. The control parameters of conventional controllers are very difficult to make. But parameters of controllers based on pole-assignment are easy to make. Simulation results are presented for the system under R-L load, no load and change reference voltage.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.543-546
• /
• 1999

Heme assignment of the 1HNMR spectrum of cytochrome c3 of D. vulgaris Miyazaki F was established [Reference: 12, 13]. The major reduction of the heme turned out to take place in the other of heme 4, 1, 2 and 3 (in the sequential numbering). The Hemes with the smallest and greatest solvent accessibility were reduced at the highest and lowest potentials in average, respectively. A cooperation interheme interaction was attributed to a pait of the closest hemes, namely, hemes 1 and 2. This assignment can provide the physicochemical bases for the elucidation of electron transfer of this protein.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.3
• /
• pp.301-311
• /
• 1990

A multiple controller structure consisting of a typical feedback controller and an additive redundant controller is proposed for enhancing the reliability of the control system. For the case where the main controller is chosen as a pole assignment controller with input/output measurements and the redundant controller as the Model Reference Adaptive Controller (MRAC) whose reference model is the closed-loop combination of the plant and the main controller, it is proven that the tracking error between the command input and plant output converges to zero under failure in one of the controllers or parameter perturbations of the plant, and further that the reliability measured by Mean Time To Failure (MTTF) is greater than that of the system with only a single main controller. A simulation Example is provided to illustrate reliable operation of the proposed control system against the controller failure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.3831-3851
• /
• 2015

This paper is concerned with the problem of joint resource allocation and user-pairing in virtual MIMO SC-FDMA systems to improve service quality of experience (QoE). No-reference logarithmic model is introduced to quantify service experience for each user and the objective is to maximize sum of all user's mean of score (MOS). We firstly formulate the optimal problem into an S-dimensional (S-D) assignment problem. Then, to solve this problem, the modified Lagrangian relaxation algorithm is deduced to obtain the suboptimal result of joint user-paring and subchannel allocation. The merits of this solution are as follows. First, the gap between its results and the global optimal one can be quantified and controlled by balancing the complexity and accuracy, which merit the other suboptimal algorithms do not have. Secondly, it has the polynomial computational complexity and the worst case complexity is O(3LN³), where L is the maximum iteration time and N is the number of subchannels. Simulations also prove that our proposed algorithm can effectively improve quality of experience and the gap between our proposed and the optimal algorithms can be controlled below 8%.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.1-10
• /
• 2010

As recent fusion industry and ubiquitous technology have grown fast, network contents, which require high load, are provided in various infrastructures and facilities such as u-city and smart phones. Therefore, it is anticipated that the playback quality of multimedia compared to network loads degrades dramatically due to the drastic increment of real-time reference of conventional high load contents (eg. multimedia data). In this paper, we improved the method of the traffic assignment based on MPP which elevated the playback quality of multimedia by assigning discriminately the possible traffic of MMS with TP coefficients. When the TP coefficient which combines content preference with media preference was applied to a real-time traffic assignment scheduler, the simulation results showed that the multimedia playback stream was assigned within the possible traffic of a server. The real-time scheduling algorithm was improved by using the TP coefficient that combines the time-dependent image contents and the weighted value of media preference. It was observed from the experiment that the loss of the possible traffic decreases to 3.91% and 3.88% for three and four clients respectively.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.58-64
• /
• 1963

Authors propose a new technique using polyethylene film instead of sodium chloride window as a cell material. Nujol mulls, liquids and aqueous solutions are sandwitched between two pieces of polyethylene film which are held between cardboards. Ordinary lead or stainless steel spacers could be used if exact cell thickness is desired. A more elaborate cell can be assembled by injecting samples between two pieces of polyethylene film which are placed between sodium chloride windows of ordinary demountable liquid cell. The absorption bands due to polyethylene and Nujol are compensated by placing the polyethylene film of suitable thickness in the reference beam. The absorption bands due to solvents such as water can also be compensated by the polyethylene film cell sandwitched solvent of suitable thickness in the reference beam. This method would be a simple new technique. Especially this technique may offer a new helpful way for the investigation of the state of substances in aqueous system. Using this technique, authors have observed the appearance of an absorption bands at 3.2 micron, in the spectrum of phenol in aqueous solution, that is absent in the spectrum of phenol in benzene solution. The same absorption band also has been observed in the spectra of aqueous formaldehyde solution and aqueous polyvinyl alcohol solution, where the absorption bands due to polyethylene and water are compensated. Although it may be regarded that this absorption band is related to the intermolecular interaction between water and the solute having OH group, that is hydrogen bonding. The exact assignment of this absorption band is out of this work.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.1
• /
• pp.79-92
• /
• 2020

As the number of systems increases and the network size increases, automated attack prediction systems are urgently needed to respond to cyber attacks. In this study, we developed four types of information gathering sensors for collecting asset and vulnerability information, and developed technology to automatically generate attack graphs and predict attack targets. To improve performance, the attack graph generation method is divided into the reachability calculation process and the vulnerability assignment process. It always keeps up to date by starting calculations whenever asset and vulnerability information changes. In order to improve the accuracy of the attack target prediction, the degree of asset risk and the degree of asset reference are reflected. We refer to CVSS(Common Vulnerability Scoring System) for asset risk, and Google's PageRank algorithm for asset reference. The results of attack target prediction is displayed on the web screen and CyCOP(Cyber Common Operation Picture) to help both analysts and decision makers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.7
• /
• pp.658-668
• /
• 2004

This paper is concerned with a control allocation strategy using the dynamic inversion and the pseudo inverse control which generates the nominal control input trajectories. In addition, an autopilot design method is proposed by using time-varying control technique which is time-varying version of the pole placement of linear time-invariant system for an agile missile with aerodynamic fin and thrust vectoring control. The control allocation proposed in this paper is capable of extracting the maximum performance by combining each control effector, aerodynamic fin and thrust vectoring control. The adopted time-varying control technique for the autopilot design enhances the robustness of the tracking performance for a reference command. The main results are validated through the nonlinear simulations with aerodynamic data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.508-513
• /
• 2003

This paper is concerned with a mixed control with aerodynamic fin and side thrusters applied to an agile missile using two-time scale dynamic inversion and linear time-varying control technique. The nonlinear dynamic inversion method with the weighting function allocates the desired control inputs (aerodynamic fin and side thrusters) to track a reference trajectory, and the time-varying control technique guarantees the robustness for the uncertainties. Closed-loop stability is achieved by the assignment of the extended-mean of these linear time-varying eigenvalues to the left half complex plane. The proposed schemes are validated by nonlinear simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1978-1982
• /
• 2005

In this paper, a linear controller is designed for the longitudinal model of X-33 in TAEM (The Terminal Area Energy Management) phase. The CRA (Characteristic Ratio Assignment) is used as the continuous time design method such that the output response of X-33 control system tracks the reference command. The performance of the proposed controller is evaluated through the step response. Also simulation results show that the initial state of the plant is dominantly affected by the poles and zeros of the plant.