• 한국소음진동공학회논문집
• /
• 제18권2호
• /
• pp.231-237
• /
• 2008

With the advent of sound field simulator, many sound fields have been reproduced by obtaining the impulse responses of specific acoustic spaces like famous concert hall, opera house. This sound field reproduction has been done by the linear convolution operation between the sound input signal and the impulse response of certain acoustic space. However, the conventional finite impulse response based linear convolution operation always makes real-time implementation of sound field generator impossible due to the large amount of computational burden. This paper introduces the fast convolution method using perceptual redundancy in the processed signals, input audio signal and room impulse response. Temporal and spectral real-time masking blocks are implemented in the proposed convolution structure. It reduces the computational burden of convolution methods for real-time implementation of a sound field generator. The conventional convolutions are compared with the proposed one in views of computational burden and sound quality. In the proposed method, a considerable reduction in the computational burden was realized with acceptable changes in sound quality.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.411-419
• /
• 2012

This paper proposes a new FDI(Fault Detection and Isolation) method, which is called EPSA(Extended Parity Space Approach). This method is particularly suitable for fault detection and isolation of the system with one faulty sensor or two faulty sensors. In the system with two faulty sensors, the fault detection and isolation probability may be decreased when two faults are occurred between the sensors related to the large fault direction angle. Nonetheless, the previously suggested FDI methods to treat the two-faults problem do not consider the effect of the large fault direction angle. In order to solve this problem, this paper analyzes the effect of the large fault direction angle and proposes how to increase the fault detection and isolation probability. For the increase the detection probability, this paper additionally considers the fault type that is not detected because of the cancellation of the fault biases by the large fault direction angle. Also for the increase the isolation probability, this paper suggests the additional isolation procedure in case of two-faults. EPSA helps that the user can know the exact fault situation. The proposed FDI method is verified through Monte Carlo simulation.

• 대한임베디드공학회논문지
• /
• 제9권4호
• /
• pp.205-210
• /
• 2014

Cache based live migration method utilizes a cache, which is accessible to both side (remote and local), to reduce the virtual machine migration time, by transferring only irredundant data. However, address space layout randomization (ASLR) is proved to reduce the memory duplicate ratio between targeted migration memory and the migration cache. In this pager, we analyzed the behavior of ASLR to find out how it changes the physical memory contents of virtual machines. We found that among six virtual memory regions, only the modification to stack influences the page-level memory duplicate ratio. Experiments showed that: (1) the ASLR does not shift the heap region in sub-page level; (2) the stack reduces the duplicate page size among VMs which performed input replay around 40MB, when ASLR was enabled; (3) the size of memory pages, which can be reconstructed from the fresh booted up state, also reduces by about 60MB by ASLR. With those observations, when applying cache-based migration method, we can omit the stack region. While for other five regions, even a coarse page-level redundancy data detecting method can figure out most of the duplicate memory contents.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.996-1006
• /
• 2017

Phasor Measurement Unit (PMU) placement is a crucial problem for State Estimation (SE) of the power system, which can ensure that the power network is fully observed. Further, the observation reliability problem of the system has been concerned in the operation conditions. In this paper, based on modified weighted adjacent matrix ($A_w$), an optimal placement method is proposed to solve simultaneously two problems involving the optimal PMU placement problem and the observation reliability enhancement problem of the system. The purpose of the proposed method is to achieve both the minimum total cost and the maximum observation reliability, with a focus on increasing the security of observability, strengthening the observation reliability of buses as well as enhancing the effectiveness of redundancy. Simulations on IEEE 14, 24, 30 and 57 bus test systems are presented to justify the methodology. The results of this study show that the proposed method is not only ensuring the power network having the observability effectively but also enhancing significantly the observation reliability. Therefore, it can be a useful tool for SE of the power system.

• 전력전자학회논문지
• /
• 제10권1호
• /
• pp.61-69
• /
• 2005

NPC 인버터는 많은 수의 전력용 반도체 소자로 구성되어 있으므로 다른 고장의 유형보다 전력용 반도체 스위치의 고장 발생 가능성이 더욱 크다. 고장발생시에 시스템의 연속적인 운전을 위한 대책의 개발은 매우 필요하며, 이러한 고장은 제안된 방법을 이용함으로써 시스템의 고장 허용 능력을 향상할 수 있다. 제안된 방법은 하나의 전력용 반도체 고장발생시 고장난 전력용 반도체가 포함된 고장상을 직렬 연결된 커패시터의 접속점에 연결한 후 나머지 두상을 이용하여 제어함으로써 직류-링크 전압을 유지하고, 일정한 크기를 가지는 출력 부하상전류를 연속적으로 시스템에 공급할 수 있다. 제안된 방법은 몇가지 특별한 분야에서 값비싼 다른 대안책들보다 더 경제적인 대안이다.

• 센서학회지
• /
• 제6권5호
• /
• pp.376-384
• /
• 1997

본 논문에서는 에지 영역을 보상한 원격 센싱된 인공위성 화상의 부호화 기법을 제안하였다. 이 기법에서는 인공위성 화상데이타의 분광적 반사 특성에 따라 각 화소벡터를 분류한 후, 각 분류영역에 대하여 대역내 및 대역간 중복성을 각간 제거하기 위하여 분류영역별 대역내 벡터양자화 및 분류영역별 대역간 예측을 행한다. 에지영역의 경우에 주변블럭의 영역정보 및 양자화된 기준대역의 화소값을 이용하여 에지영역을 보상한다. 그후, 대역간 중복성을 효과적으로 제거하기 위하여 보상된 영역정보를 이용하여 분류영역별 대역간 예측을 행한다. 실제 LANDSAT-TM 인공위성 화상데이타에 대한 실험을 통하여 제안한 기법의 부호화 효율이 기존의 기법에 비하여 우수함을 확인하였다.

• 한국측량학회지
• /
• 제7권2호
• /
• pp.1-6
• /
• 1989

수준망의 조정계산은 관측방정식에 의한 최소제곱법을 사용하여 등급별로 독립적인 순차조정을 실시하는 것이 일반적이다. 그러나 망의 규모가 작을 경우에는 자유도가 낮기 때문에 통계분석에 어려움이 있고 저등급의 망에 대한 오차를 정확히 평가하기가 곤란하다. 본 연구에서는 1967년∼1987년간에 측정된 우리나라의 측지수준망자료를 이용하여 1,2등수준망을 혼합시켜서 조합조정하는 방법을 논하였으며 조합조정의 특성을 분석하였고 타원보정에 따른 영향과 조정원점의 변화에 따른 영향을 분석하였다. 또한 실수자유도에 의한 망의 강도분석과 분산요소값의 추정에 의한 망의 정확도를 산출하여 우리나라 측지수준망을 평가하였다.

• 한국멀티미디어학회논문지
• /
• 제24권3호
• /
• pp.431-439
• /
• 2021

Since the sensor nodes are randomly arranged in the region of interest, it may happen that the sensor network area is separated or there is no sensor node in some area. In addition, after the sensor nodes are deployed in the sensor network, a coverage hole may occur due to the exhaustion of energy or physical destruction of the sensor nodes. The coverage hole can greatly affect the overall performance of the sensor network, such as reducing the data reliability of the sensor network, changing the network topology, disconnecting the data link, and worsening the transmission load. Therefore, sensor network coverage hole recovery has been studied. Existing coverage hole recovery studies present very complex geometric methods and procedures in the two-step process of finding a coverage hole and recovering a coverage hole. This study proposes a method for discovering and recovering a coverage hole in a sensor network, discovering that the sensor node is a boundary node by itself, and determining the location of a mobile node to be added. The proposed method is expected to have better efficiency in terms of complexity and message transmission compared to previous methods.

• 한국컴퓨터정보학회논문지
• /
• 제14권8호
• /
• pp.43-50
• /
• 2009

디지털 비디오에서 텍스트 정보는 비디오 데이터의 시청각적인 정보를 보강하고 부가 정보를 제공하기 때문에 방대한 멀티미디어의 내용을 예측할 수 있는 중요한 단서를 제공한다. 본 논문에서 제안된 방법은 주어진 영상열로부터 자막의 획 특징을 이용하여 자막을 탐지하고, 프로젝션을 이용하여 자막의 위치를 찾는다. 찾아진 자막을 포함하는 바운딩박스에 대한 기하학적인 검증을 거친 후, 서로 인접하는 프레임에 있는 바운딩박스 중 공간적으로 동일한 위치의 바운딩박스에 대한 MAD를 이용하여 바운딩박스를 추적하고, 시간적 중복성을 이용하여 바운딩박스 영역의 화질을 향상시킨다. 다양한 비디오에 대한 실험 결과는 제안된 방법의 타당성을 보인다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2782-2786
• /
• 2011

In this paper a protocol design for bus network communication between onboard signalling system and MMI(Man Machine Interface) will be presented and illustrated. Recently, many onboard signailling systems adopt hot standby for safety reasons. Hot standby is a method of redundancy in which the primary and secondary systems run simultaneously. It is convenient to use bus network(bus topology) in a hot standby system for communication between onboard signalling system and MMI. Because bus network is the simplest way to connect multiple clients such as onboard signalling system, MMI and etc. However, there are many problems when two clients want to transmit at the same time on the same bus. A effective protocol is necessary to solve that problems. We will describes protocol design which is useful when onboard signalling systems and MMIs are connected via RS485(Bus Network).