• 한국환경복원기술학회지
• /
• 제12권2호
• /
• pp.95-105
• /
• 2009

Land Use Changes (LUCs) have effects on greenhouse gas emissions and carbon stocks in soil and vegetation. Therefore, predictions for LUC are very important for achieving quantitative targets of $CO_2$ reduction rates. Some research exists on carbon fluxes and carbon cycles to estimate carbon stocks in terrestrial ecosystems in Korea. However, these researches have limitations in terms of helping us understand future potential reductions of $CO_2$ that reflect the influence of LUC. The aim of this study is to analyze the reduction levels of $CO_2$ emissions while considering LUC scenarios that effect carbon fluxes for LCS basic study in the year 2030. In this study, a common approach to model the effects of LUC on carbon stocks is the use of CA-Markov technical process with LUC patterns in the past. Potential reduction of $CO_2$ is calculated by change of land use that contains different soil organic carbon, each land use type, and biomass in vegetation. An IPCC analytical method of natural carbon sink and coefficient results from previous study in Korea is used as a calculation method for potential reduction of $CO_2$. As a result, 12,419 KtC will be reduced annually, which is 8.3% percent of 2005 $CO_2$ emissions in Korea. This will result in 3,226 hundred million won of economic efficiency. In conclusion, conservation of natural carbon sinks is necessary even if the amount of potential reduction change is little.

• 환경영향평가
• /
• 제15권1호
• /
• pp.23-33
• /
• 2006

The factor of air pollution in a large industrial city is not only manufactories but also, activities related to trucks. Sihwa National Industrial Complex is located in Siheung City; due to the industries, more diverse activities related to trucks occur in Siheung City than other cities. In particular, the new residential area in Siheung City is close to the industrial complex; so, the damage of this residential area is expected that it would be more serious and vulnerable than other areas. The aim of this study is to analyze influence of the air pollution by a truck in Siheung City. ISCST3 Model and Arc View program were used for this study and Siheung City was divided into 1,000 meter by 1,000 meter grid to analyze. Furthermore, this study suggested two reduction controls of air pollution in Siheung City, and analyzed the results from these reduction managements. The results of the present condition showed that residences located in north of Sihwa Industrial Complex are influenced by air pollution material. Furthermore, air pollution by trucks has affected on the residents which is near the road in Siheung City. Therefore, this study suggested two reduction controls by the Traffic System Management. The first alternative plan is setting the truck traffic limitation zone in the road that is located in south of resident areas and many trucks traffic. Next, the second alternative plan is setting freight truck way on the most traffic road to enter the industrial complex. The reduction effect of the first alternative is good on the residential area. And, the second alternate about freight truck way is divided passenger cars into trucks. Therefore, there are increase of average speed and decrease of average concentration, and spatial reduction effects found in wide areas.

• KIEAE Journal
• /
• 제12권3호
• /
• pp.89-94
• /
• 2012

The international community is paying close attention to the climatic changes caused by the meteorological anomalies. In response to such phenomena, after the adoption of the United Nations Framework Convention on Climate Change in 1992, efforts to actively respond to the meteorological changes are proliferating all over the world; even in the Republic of Korea, the issue to tackle the meteorological changes has emerged as a top-priority national agenda. In the year of 2008, after the declaration of the low-carbon, green-growth paradigm by the government, the UNFCCC COP15 has announced a 30% reduction target of the emission of the greenhouse gases by 2020 as compared to the "Business As Usual, BAU" and has also confirmed, as a commitment plan to achieve reduction in the emission of greenhouse gases, the reduction target of greenhouse gases for all sectors, industries and years. (26.9% for buildings) Since the construction of the new apartment houses in the year of 2001, the "Building Energy Efficiency Rating", has been applied to newly constructed building complexes, built in 2010; the accumulated emission reduction has been evaluated at around 450,000toe and the accumulated carbon dioxide emission reduction is at $826,000tCO_2$ And through the prediction of these values under various scenarios (New construction, new construction / expansion of existing uses, when transferred to 1stgrade), the effects on the degree of reduction of greenhouse gases by the increased certification of the Building Energy Efficiency Rating are an alyzed and it is our aim to express the importance of the certification system capable of carrying out a quantitative evaluation of the building energy in order to establish the strategy to reduce the emission of carbon dioxide.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.64-74
• /
• 2015

Because of the burgeoning demand of the energy, the countries are finding sustainable solutions for these emerging challenges. Demand Side Management is playing a significant role in managing the demand with an aim to support the electrical grid during the peak hours. However, advancement in controls and communication technologies, the aggregators are appearing as a third party entity in implementing demand response program. In this paper, a detailed mathematical framework is discussed in which the aggregator acts as an energy service provider between the utility and the consumers, and facilitate the consumers to actively participate in demand side management by introducing the new concept of demand reduction bidding (DRB) under constrained direct load control. Paper also presented an algorithm for the proposed framework and demonstrated the efficacy of the algorithm by considering few case studies and concluded with simulation results and discussions.

• Journal of Microbiology and Biotechnology
• /
• 제27권10호
• /
• pp.1773-1777
• /
• 2017

The aim of this study was to examine the efficiency of Rhodosporidium toruloides as a new tool to evaluate the triglyceride (TG) reduction effects of anti-obesity candidate materials. Unfermented and fermented persimmon leaf hot water extracts (UFPLE and FPLE) were used as anti-obesity agents. The content of TG in R. toruloides treated with FPLE was less than those with UFPLE by about 11% (p < 0.05) relative to the control (R. toruloides incubated in YPD medium without the agents). Fat reduction in 3T3-L1 cells achieved by FPLE was about 13% higher than that achieved by UFPLE.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1145-1150
• /
• 2005

The aim of this paper is to investigate the effect of surface texturing on metal surface and to understand the potential of friction reduction through micro-scale dimple to fabricate by photolithography on pin-on-disk test using flat-on-flat contact geometry. It was verify that the friction property with respect to the same pitch has been influence on the size of dimple under lubricated sliding contact. Also, we can recognize from Stribeck curve that the friction property has a connection with the size of dimple. It can explain a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. The friction property has been an effect on the size of surface texture on reduction friction, not only because the density of dimple, but also because the ratio of diameter/pitch. This ratio of approximately 0.5 is recommend under the tested friction condition. It suggested that the ratio of d/p is an important parameter for surface texture design.

• Transactions on Electrical and Electronic Materials
• /
• 제14권5호
• /
• pp.268-272
• /
• 2013

The aim of this study was to develop an ultrasonic tooth-whitening apparatus using piezoelectric transducers, which enhance bleaching efficiency by applying ultrasound, while performing a teeth whitening procedure. For this purpose, an ultrasonic transducer was designed and manufactured, and the effects of reduction in the whitening material's concentration and in the whitening treatment time through using the ultrasound cavitation phenomenon were confirmed. Also, the validity of this study was investigated by comparing the whitening performance with a commercialized optical whitener, through color comparison. The results revealed that the ultrasound whitener produced color values that were enhanced by as much as double that of the conventional LED light whitening method. Even when the operational time was reduced by half, the ultrasound method showed superior performance by over 54% compared to the conventional light whitener, revealing that the ultrasound method showed a remarkable treatment reduction effect.

• 대한수학회논문집
• /
• 제28권2호
• /
• pp.297-301
• /
• 2013

When certain general single or multiple hypergeometric functions were introduced, their reduction formulas have naturally been investigated. Here, in this paper, we aim at presenting a very interesting reduction formula for the Srivastava's triple hypergeometric function $F^{(3)}[x,y,z]$ by applying the so-called Beta integral method to the Henrici's triple product formula for hypergeometric series.

• Journal of Korean Neurosurgical Society
• /
• 제40권2호
• /
• pp.95-98
• /
• 2006

Objective : The aim of this study is to evaluate the feasibility, safety and effectiveness of radiofrequency neurotomy[RFN] for remnant pain after vertebroplasty for the treatment of severe compression fracture. Methods : 25 patients with remnant pain after vertebroplasty for one level severe compression fracture were treated by RFN. The severe compression fractures were defined to the vertebrae which less than 50% of their original heights have collapsed. Pain relief was evaluated at 2 weeks, 6 weeks and 3 months after the procedure using a visual analog scale[VAS]. Results : Successful outcome was determined if pain reduction exceeded 50% on the VAS at 6 weeks. Six of the 25 patients did not respond favorably to RFN [pain reduction less than 50%], and nineteen patients showed successful responses. Mean VAS score was decreased from 5.48 to 2.96 at 6 weeks. Conclusion : The radiofrequency neurotomy may be both feasible and useful treatment for the remnant pain after vertebroplasty. However long-term follow up is needed to confirm the effectiveness.

• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.39-45
• /
• 1984

10years and 8 months old patient, who had been wearing Milwaukee brace for 5 months, was treated by multibanded system without extract on. She complianed severe protrusion and interdental spacing of upper anterior teeth. Cephalometric analysis revealed short anterior facial height, infraclusion of the lower first molars and severe profrusion of upper and lower anterior teeth. During orthodontic treatment Milwaukee brace was replaced by TLSO, so the orthopedic force on the dentofacial region was eliminated. After 2 years and 3 months, she gained raised bite, increased interincisal angle, salient reduction in the protrusion of upper central incisals with agreeable overjet, complete obliteration of interdental spacing and reduction of protrusion of upper and lower lips.