• Korean Security Journal
• /
• no.37
• /
• pp.165-195
• /
• 2013

Today, the importance of social capital is emphasized in modern industry as the third capital. Social capital involves "trust and norms for members" and "social network" related to effective human resource management, which is being investigated actively by many researchers. However, It is difficult to see the report on the social capital of private security industry employees. So, this report suggests effective management practices of employees through the empirical analysis on the relationship between social capital and job satisfaction with a focus on the role of mediation for job characteristics. For the most, this research through analysis on relationship between social capital and job satisfaction shows that of the components of social capital, trust and networks influence effect on job satisfaction significantly. Secondly, as result of analysis on role of mediation for job satisfaction, importance of job involved in job characteristics has an effect of mediation. This result of empirical analysis menas that the pressure of private security industry employees is reduced and cooperation which is based on social capital is need through members' trust and social network. Therefore, the strategy of management about private security industry employees should be considered for both activation of social capital and maintenance.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.99-106
• /
• 2007

The gait instability in the elderly has been associated with age-related deterioration in physical strength and reducing the potential for elderly falls requires regular exercise. In 2005, National Center for Injury Prevention and Control(NCIPC) reported that most elderly falls occur during activities in daily living(ADL). To better reveal biomechanic mechanisms underlying age-related degeneration in gait stability, and to enhance the assessment of falls risk, an accurate quantification of a person's balance maintenance during locomotion is needed. Instantaneous orientation of the line connecting COP and COM can characterize whole body position with respect to the supporting foot during gait and the angle between this line and the vertical line passing through the COP known as a good assessment to detect the elderly gait instability. Therefore the purpose of this study was to investigate a 6-month walking exercise effects in reducing elderly fall risk factors by using COP-COM inclination angles. Twenty-two community-dwelling elderly participated this study. The participants performed a walking exercise(3 times/week, 1 hour/visit) for 6 months. Laboratory kinematics during walking was assessed at months 0, 3 and 6. Significant increased in gait velocity was found among periods(p=.011, $1.25{\pm}.03$, $1.32{\pm}.03$, and $1.39{\pm}.04\;m/s$ in 0-, 3-, and 6-month, respectively). Also, significant differences in anterior and posteriror inclination angles were found among the periods(p<.05; posterior inclination angles: $12.8{\pm}2.2$, $11.0{\pm}2.9$, & $10.9{\pm}1.9$; anterior inclination angles: $13.7{\pm}1.7$, $14.6{\pm}3.2$, & $1.46{\pm}.21$ in 0month, 3month, & 6month, respectively). These findings provide evidence of significant reduced fall risk factors of community-living older adults associated with a systematic walking program.

• Journal of Trauma and Injury
• /
• v.22 no.2
• /
• pp.218-226
• /
• 2009

Purpose: In multiple blunt trauma patients, transfusion may be a significant therapeutic adjunct to non-operative management. The blood products must be expedited and efficiently to patients in impending shock caused by hemorrhage or traumatic coagulopathy, but the decision to perform blood transfusion has been made empirically, based on the clinician' and has not been guided by objective parameters, but own opinion, that may result in an underestimate of or a failure to detect bleeding, in delayed transfusion, and in a reduced outcome. This article presents quickly assessable predictive factors for determining if a blood transfusion is required to improve outcomes in multiple blunt trauma patients admitted to the emergency room. Methods: In a retrospective review of 282 multiple blunt trauma patients who visited our emergency center by emergency rescuer during a 1-year period, possible factors predictive of the need for a blood transfusion were subjected to univariate and multivariate logistic regression analysis. Results: Of blunt trauma patients, 9.2% (26/282), received red blood cells in the first 24 hours of care. Univariate analysis revealed significant associations between blood transfused and heart rate (HR) > 100 beats/min, respiratory rate (RR) > 20 breaths/min, Glasgow Coma Scale (GCS) < 14, Revised Trauma Score (RTS) < 11, white blood cell count (WBC) < 4000 or > 10000, and initial abnormal portable trauma series (Cspine lateral, chest AP, pelvis AP). A multiple regression analysis, with a correction for diagnosis, identified HR > 100 beats/min (EXP 3.2), GCS < 14 (EXP 4.1), and abnormal trauma series (EXP 2.9), as independent predictors. Conclusion: In our study, systolic blood pressure (SBP) < 90 mmHg, old age > 65 years, hemoglobin < 13g/dL, mechanism of injury were poor predictors of early blood transfusion. Initial abnormal portable trauma series, HR > 100 beats/min, and GCS < 14 were quickly assessable useful factors for predicting a need for early blood transfusion in blunt trauma patients visiting the emergency room.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.355-364
• /
• 1995

A heavy fluid is injected to a rotating cylindrical container of flat or inclined bottom filled with homogeneous lighter fluid. Continuous flow-in and spreading patterns over the bottom of the container are observed and at the same time upper-layer motions induced by the movement of the heavy fluid are traced by thymol blue solution. Regardless of bottom geometry, the injected denser fluid is deflected toward "western wall" and continuous its path along the boundary with radial spreading which occurs in the bottom boundary layer to make a quite asymmetric flow. When the bottom contains a slope(${\beta}$-plane), increased pressure gradient causes the fluid move faster to produce a stronger Coriolis force. This makes the width of the flow narrower than that of f-plane. But, when the denser flow reaches the southern part of the container, a local-depth of denser fluid increases (much greater than the Ekman-layer depth) such that the spreading velocity along the wall is reduced and the interfacial slope increases to make the upper-layer adjust geographically to have oppositely directed upper-layer motion along the interfacial boundary. The role of the denser fluid in terms of vorticity generation in the upper-layer is such that it produces local topographic effect over the western half of the container and also induces vortex-tube stretching which is especially dominant in the f-plane.

• Journal of Oriental Neuropsychiatry
• /
• v.20 no.2
• /
• pp.47-60
• /
• 2009

Objectives : This study was performed to show the effects of Samjung-hwan ($S{\={a}}nj{\={i}}ngw{\'{a}}n$) extract on obesity and lipid metabolism of rats fed high fat diet. Methods : Crushed Samjung-hwan($S{\={a}}nj{\={i}}ngw{\'{a}}n$) 245 g was extracted with methyl alcohol. The extract was evaporated under reduced pressure to give 21.8 g. 20 rats were divided into normal, control, and two test groups. For 6 weeks, The normal group rats were supplied with a normal diet. The control group rats were supplied with a high fat diet. The test group 1 rats were supplied with a high fat diet and Samjung-hwan($S{\={a}}nj{\={i}}ngw{\'{a}}n$) extract 250 rug/kg and the test group 2 rats were supplied witha high fat diet and Samjunghwan($S{\={a}}nj{\={i}}ngw{\'{a}}n$) extract 500 mg/kg. Results : 1) The control group rats showed significantly increased weight of peritoneal fat than the nornal group rats. The test group 1 rats did not show significant difference compare to the control group rats, and the test group 2 rats showed significantly decreased weight of peritoneal fat than the control group rats. 2) The control group rats showed significantly increased triglyceride than the nornal group rats. The test group 1 rats showed significantly decreased triglyceride than the control group rats, and the test group 2 rats showed significantly decreased triglyceride than the control group rats. 3) The control group rats showed significantly increased LDL-cholesterol than the nornal group rats. The test group 1 rats showed significantly decreased LDL-cholesterol than the control group rats, and the test group 2 rats did not show significant difference compare to the control group rats. Conclusions : These results suggest that effectiveness of Samjung-hwan($S{\={a}}nj{\={i}}ngw{\'{a}}n$) extract to control the obesity and abnormal lipid metabolism caused by a high fat diet.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.5
• /
• pp.1296-1302
• /
• 2005

Laminariae Thallus has been known to be effective for the treatment of obesity. Te show the effectiveness of Laminariae Thallus in a more scientific way, Laminariae Thallus extract was prepared and evaluated in high fat diet rats by measuring the changes of body weight and lipid metabolism as described briefly below. 200 g of crushed Laminariae Thallus was extracted with methyl alcohol. The extract was evaporated under reduced pressure to give 14.4g. For 10 weeks, control group rat were ingested high fat diet, while the test group rat were fed with a fat diet pius Laminariae Thallus extract. Normal group was fed with normal diet. 150 mg of Laminariae Thallus extract per 1 kg of body weight was added to the diet in a test group rats. Control group rats on a high fat diet gained weight significantly, whereas the test group rats on a high fat diet plus Laminariae Thallus extract gained weight less. Significant increase of liver weight caused in a high fat diet was also inhibited by the Laminariae Thallus extract treatment. Total lipid, triglyceride, phospholipid and total cholesterol levels of serum in the high fat diet rats were remarkably increased, whereas their levels on a high fat diet plus Laminariae Thallus extract were less increased. While serum HDL-cholesterol levels was remarkably decreased in a high fat diet, its level was less decreased in a high fat diet plus Laminariae Thallus extract. Furthermore, we observed that the activities of hepatic acetyl-CoA carboxylase and fatty acid synthetase increased in a high fat diet, while their activities in a high fat diet plus Laminariae Thallus extract were getting back nearly to the normal levels of normal diet rats. These result showed that the obesity caused by a high fat diet was effectively inhibited by a Laminariae Thallus extract. Our results also showed that the abnormal lipid metabolism caused by a high fat diet was effectively cured by adding Laminariae Thallus extract.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.239-240
• /
• 2012

With advancements in semiconductor device technologies, manufacturing processes are getting more complex and it became more difficult to maintain tighter process control. As the number of processing step increased for fabricating complex chip structure, potential fault inducing factors are prevail and their allowable margins are continuously reduced. Therefore, one of the key to success in semiconductor manufacturing is highly accurate and fast fault detection and classification at each stage to reduce any undesired variation and identify the cause of the fault. Sensors in the equipment are used to monitor the state of the process. The idea is that whenever there is a fault in the process, it appears as some variation in the output from any of the sensors monitoring the process. These sensors may refer to information about pressure, RF power or gas flow and etc. in the equipment. By relating the data from these sensors to the process condition, any abnormality in the process can be identified, but it still holds some degree of certainty. Our hypothesis in this research is to capture the features of equipment condition data from healthy process library. We can use the health data as a reference for upcoming processes and this is made possible by mathematically modeling of the acquired data. In this work we demonstrate the use of recurrent neural network (RNN) has been used. RNN is a dynamic neural network that makes the output as a function of previous inputs. In our case we have etch equipment tool set data, consisting of 22 parameters and 9 runs. This data was first synchronized using the Dynamic Time Warping (DTW) algorithm. The synchronized data from the sensors in the form of time series is then provided to RNN which trains and restructures itself according to the input and then predicts a value, one step ahead in time, which depends on the past values of data. Eight runs of process data were used to train the network, while in order to check the performance of the network, one run was used as a test input. Next, a mean squared error based probability generating function was used to assign probability of fault in each parameter by comparing the predicted and actual values of the data. In the future we will make use of the Bayesian Networks to classify the detected faults. Bayesian Networks use directed acyclic graphs that relate different parameters through their conditional dependencies in order to find inference among them. The relationships between parameters from the data will be used to generate the structure of Bayesian Network and then posterior probability of different faults will be calculated using inference algorithms.

• Membrane Journal
• /
• v.27 no.2
• /
• pp.199-204
• /
• 2017

In this study, a study was carried out for the separation of metal ions in lignin extract discharged from the pulp process. alumina powders were mixed with DMAc (N, N-dimethylacetamide) solvent and PESf (Polyethersulfone) polymer, PVP (polyvinylpyrrolidone) dispersant was added and slip casting method was used to prepare the membrane. The membrane was measured for pore size through a CFP (Capillary Flow Porometer) device and the surface and cross-section of the membrane were observed through a FE-SEM (Field Emission Scanning Electron Microscope). The flux was calculated by measuring the filtered weight per hour using a separation experiment device. Pore size measurements were performed under increasing pressure from 0 psi to 30 psi. The pore size of the membrane was $0.4{\mu}m$ and the flux decreased from the initial flux value of $6.36kg{\cdot}m^{-2}{\cdot}h^{-1}$ to $1.98kg{\cdot}m^{-2}{\cdot}h^{-1}$ due to the fouling of the membrane. After the permeation experiment, membrane contaminants were removed by simple washing. Separation experiments showed that Na contained in the initial lignin extract was reduced by 69%, Fe was removed by 87%, K by 95%, Ca by 93% and Mg by 96%.

• Korean Journal of Community Nutrition
• /
• v.23 no.4
• /
• pp.318-332
• /
• 2018

Objectives: The purpose of this study was to investigate the behavioral modification of obese adults who underwent nutritional and physical activity education. Twenty obese females, aged 20-60 years old, with BMIs (Body Mass Index) >30 or body fat (%) >40 were subjected to this study. Methods: The physical activity education program consisted of doing exercise in a gymnasium together or home exercise. Dietary attitudes and dietary intakes were assessed using weight control, physical activity, and eating habits. The nutrition-exercise educational period was 12 weeks. Results: After the study period, there was significant improvement in physical activity and eating habits score. Furthermore, there was a significant increase in the dietary intakes of fiber, iron, potassium, vitamin A, vitamin $B_6$, and niacin. Blood pressure, blood glucose, and total cholesterol levels showed a tendency to decrease, but there was no significant difference. BMI, fat mass, abdominal circumference, and visceral fat levels were significantly reduced while muscle mass significantly increased. Conclusions: This study suggests that behavioral modification by nutrition and physical activity education with feedback has positive effects on dietary intake and anthropometric biomarkers in obese adults. Therefore, lifestyle interventions of this kind could be recommended as a method for obesity management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5074-5081
• /
• 2015

A method for improving the warpage of the plastic part is a method of removing residual stress of the plastic product. that a non-uniform cooling are appeared in the injection molding process make uniform cooling. this study was developed the Rapid heating and cooling device used peltier module for uniform cooling. Make the Rapid heating and cooling device(RCHD), for Traditional water cooling device(TWCD) method and the Rapid heating and cooling method warpage were compared and were analyzed and the materials used amorphous ABS polymer. various warpage were compared for the process parameters such as packing pressure, packing time, resin temperature, mold temperature, In the amorphous ABS polymer, TWCD method has higher warpage than RCHD method and show the result to be a bit more uniform cooling. The distribution state of the ABS polymer was confirmed Through the Scanning electron microscope. In the TWCD method the distribution state of the polymer be densely distributed, and RCHS method be distributed wider than TWCD method. this is that injection molded parts be seen that cooling was made uniformly, As the temperature of the mold is gradually progress, Particles of the polymer is increased this is that internal stress was reduced.