• Geomechanics and Engineering
• /
• 제1권4호
• /
• pp.275-289
• /
• 2009

Electroosmosis (EO) is the movement of water in a porous medium under the influence of a direct current (dc). In past decades, electro-osmosis has been successfully employed in many soil improvement and other geotechnical engineering projects. Metal electrodes, such as steel, copper and aluminum have been used traditionally to conduct current. The shortcoming of these electrodes is that they corrode easily during an EO treatment, which results in reduced effectiveness and environmental concerns. More recently, conductive polymers are developed to replace metal electrodes in EO treatment. Electrical vertical drainages (EVDs) are one of these products under trial. The goal of this study is to assess the performance of EVDs for soil improvement and to further understand the scientific principle of the EO process, including the voltage drop at the soil-EVD interface, electrical current density, polarity reversal, and changes in soil physico-chemical properties generated by electroosmosis. It is found from the study that after 19 days of EO treatment with a constant applied dc electric field intensity of 133 V/m, the soil's moisture content decreased by 28%, the shear strength and pre-consolidation pressure increased more than 400%. It is also found that the current density required triggering the water flow in the soil tested, the Korean Yulchon marine clay, is 0.7 $A/m^2$. The project demonstrates that EVDs can serve as both electrodes and drains for soil improvement in short term. However, the EVDs, as tested, are not suitable for polarity reversal in EO treatment and their service life is limited to only 15 days.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.84-93
• /
• 1994

본 연구에서는 NACA0012단면을 갖는 타원형날개끝 캐비테이션과 유기소음특성에 미치는 표면거칠기의 영향이 실험적으로 조사되었다. 사용한 표면거칠기는 조도 $200{\mu}m$의 입자로서, 날개끝 3cm 구간에 부착하였다. 또한 날개끝과 앞날에 각각 3cm의 거칠기를 준 경우도 별도로 조사되었다. 캐비테이션 발생시험 결과 캐비테이션 초기발생위치는 실험한 받음각 범위에서 날개끝으로부터 대략 1/2 코오드정도 후류이며, 캐비테이션 수가 감소함에 따라 변화하는 형상을 보였다. 날개끝 캐비테이션에 의한 소음은 주파수 3-50kHs사이의 비교적 고주파수에서 음압이 증가하는 양상을 보였으나, 더 낮은 캐비테이션수에서 날개 앞날 캐비테이션으로 확장되면 전 주파수 범위에 걸쳐서 소음이 증가하었다. 캐비테이션과 소음발생은 표면거칠기가 증가할때 개선되는 경향을 보였으나 그 차이는 크지않았다. 날개 앞날과 끝날에 거칠기를 준 경우가 낮은 캐비테이션수에서 다소 유리한 캐비테이션 특성을 보여준 반면 양력-항력비의 감소에 따른 문제점도 지적되었다.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.569-580
• /
• 2005

The present study investigates the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger. The effects of duct aspect ratio and flow velocity on the heat/mass transfer are investigated. Local heat/mass transfer coefficients on the corrugated duct sidewall are determined using a naphthalene sublimation technique. The aspect ratios of the wavy duct are 7.3, 4.7 and 1.8 with the corrugation angle of $145\Omega$. The Reynolds numbers, based on the duct hydraulic diameter, vary from 300 to 3,000. The results show that at the low Re(Re $\leq$ 1000) the secondary vortices called Taylor-Gortler vortices perpendicular to the main flow direction are generated due to effect of duct curvature. By these secondary vortices, non-uniform heat/mass transfer coefficients distributions appear. As the aspect ratio decreases, the number of cells formed by secondary vortices are reduced and secondary vortices and comer vortices mix due to decreased aspect ratio at Re$\leq$1000. At Re >1000, the effects of corner vortices become stronger. The average Sh for the aspect ratio of 7.3 and 4.7 are almost same. But at the small aspect ratio of 1.8, the average Sh decreases due to decreased aspect ratio. More pumping power (pressure loss) is required for the larger aspect ratio due to the higher flow instability.

• Archives of Plastic Surgery
• /
• 제48권6호
• /
• pp.599-606
• /
• 2021

Background Postoperative dehiscence and surgical site infection after spinal surgery can carry serious morbidity. Multidisciplinary involvement of plastic surgery is essential to minimizing morbidity and achieving definitive closure. However, a standardized approach is lacking. The aim of this study was to identify effective reconstructive interventions for the basis of an evidence-based management protocol. Methods A retrospective review was performed at a single tertiary institution for 45 patients who required 53 reconstruction procedures with plastic surgery for wounds secondary to spinal surgery from 2010 to 2019. Statistical analysis was performed for demographics, comorbidities, and treatment methods. Primary outcomes were postoperative complications, including dehiscence, seroma, and infection. The secondary outcome was time to healing. Results The overall complication rate was 32%, with dehiscence occurring in 17%, seroma in 15% and infection in 11% of cases. Median follow-up was 10 months (interquartile range, 4-23). Use of antibiotic beads did not affect rate of infection occurrence after wound closure (P=0.146). Use of incisional negative pressure wound therapy (iNPWT) was significant for reduced time to healing (P=0.001). Patients treated without iNPWT healed at median of 67.5 days while the patients who received iNPWT healed in 33 days. Demographics and comorbidities between these two groups were similar. Conclusions This data provides groundwork for an evidence-based approach to soft tissue reconstruction and management of dehiscence after spinal surgery. Timely involvement of plastic surgery in high-risk patients and utilization of evidence-based interventions such as iNPWT are essential for improving outcomes in this population.

• 한국재료학회지
• /
• 제31권9호
• /
• pp.525-531
• /
• 2021

Carbon-encapsulated Ni catalysts are synthesized by an electrical explosion of wires (EEW) method and applied for CO₂ methanation. We find that the presence of carbon shell on Ni nanoparticles as catalyst can positively affect CO₂ methanation reaction. Ni@5C that is produced under 5 % CH₄ partial pressure in Ar gas has highest conversions of 68 % at 350 ℃ and 70 % at 400 ℃, which are 73 and 75 % of the thermodynamic equilibrium conversion, respectively. The catalyst of Ni@10C with thicker carbon layer shows much reduced activity. The EEW-produced Ni catalysts with low specific surface area outperform Ni catalysts with high surface area synthesized by solution-based precipitation methods. Our finding in this study shows the possibility of utilizing carbon-encapsulated metal catalysts for heterogeneous catalysis reaction including CO₂ methanation. Furthermore, EEW, which is a highly promising method for massive production of metal nanoparticles, can be applied for various catalysis system, requiring scaled-up synthesis of catalysts.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.279-283
• /
• 2018

In this study, we investigate the behavior of abrasive particles and change of the stick-slip pattern according to chemical mechanical polishing (CMP) process parameters when a large number of abrasive particles are fixed on a pad. The CMP process is simulated using the finite element method. In the simulation, the abrasive grains are composed of those used in the actual CMP process. Considering the cohesion of the abrasive grains with the start of the CMP process, abrasive particles with various sizes are fixed onto the pad at different intervals so that stick-slip could occur. In this analysis, we determine that when the abrasive particle size is relatively large, the stick-slip period does not change as the pressure increases while the moving speed is constant. However, if the size of the abrasive grains is relatively small, the amount of deformation of the grains increases due to the elasticity of the pad. Therefore, the stick-slip pattern may not be observed. As the number of abrasive particles increases, the stick-slip period and displacement decrease. This is consistent with the decrease in the von Mises yield stress value on the surface of the wafer as the number of abrasive grains increases. We determine that when the number of the abrasive grains increases, the polishing rate, and characteristics are improved, and scratches are reduced. Moreover, we establish that the period of stick-slip increases and the change of the stick-slip size was not large when the abrasive particle size was relatively small.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.11-15
• /
• 2018

Torque tubes in High Temperature Superconducting (HTS) motor transfer torque from superconducting field winding rotor to the room temperature shaft. It should have minimum heat conduction property for minimizing the load on cryo-refrigerator. Generally, these torque tubes are made with stainless steel material because of high strength, very low outgassing and low thermal contraction properties at cryogenic temperatures and vacuum conditions. With recent developments in composite materials, these torque tubes could be made of composites such as Kevlar and S-Glass, which have the required properties like high strength and low thermal conductivity at cryogenic temperatures, but with a reduced weight. Development and testing of torque tubes made of these composites for HTS motor are taken up at Bharat Heavy Electricals Limited (BHEL), Hyderabad in collaboration with Central Institute of Plastics and Engineering Technology (CIPET), Chennai and Indian Institute of Technology (IIT), Kharagpur. As these materials are subjected to vacuum, it is important to measure their outgassing rates under vacuum conditions before manufacturing prototype torque tubes. The present study focusses on the outgassing characteristics of Kevlar and S-Glass, using an Outgassing Measurement System (OMS), developed at IIT Kharagpur. The OMS facility works under vacuum environment, in which the test samples are exposed to vacuum conditions over a sufficient period of time. The outgassing measurements for the composite samples were obtained using pressure-rise technique. These studies are useful to quantify the outgassing rate of composite materials under vacuum conditions and to suggest them for manufacturing composite torque tubes used in HTS motors.

• Clinical and Experimental Pediatrics
• /
• 제62권3호
• /
• pp.95-101
• /
• 2019

Purpose: Increased apoptosis was recently found in the hypertrophied left ventricle of spontaneously hypertensive rats (SHRs). Although the available evidence suggests that apoptosis can be induced in cardiac cells by various insults including pressure overload, cardiac apoptosis appears to result from an exaggerated local production of angiotensin in adult SHRs. Altered expressions of Bcl associated X (Bax), Bcl-2, chemokine receptor (CCR)-2, monocyte chemoattractant protein (MCP)-1, transforming growth factor $(TGF)-{\beta}1$, phosphorylated extracellular signal-regulated kinases (PERK), and connexin 43 proteins, and kallikrein mRNA were investigated to explore the effects of losartan on the SHR model. Methods: Twelve-week-old male rats were grouped as follows: control (C), SHR (hypertension: H), and losartan (L; SHRs were treated with losartan [10 mg/kg/day] for 5 weeks). Western blot and reverse transcription polymerase chain reaction assays were performed. Results: Expression of Bax, CCR-2, MCP-1, $TGF-{\beta}1$, PERK, and connexin 43 proteins, and kallikrein mRNA was significantly increased in the H group compared to that in the C group at weeks 3 and 5. Expression of Bax, CCR-2, MCP-1, $TGF-{\beta}1$, and connexin 43 proteins and kallikrein mRNA was significantly decreased after losartan treatment at week 5. PERK protein expression was significantly decreased after losartan treatment at weeks 3 and 5. Bcl-2 protein expression was significantly decreased in the H group compared to that in the C group at weeks 3 and 5. Conclusion: Losartan treatment reduced expression of Bax, CCR-2, MCP-1, $TGF-{\beta}1$, PERK, and connexin 43 proteins, and kallikrein mRNA in SHRs, along with decreased inflammation and apoptosis.

• The Korean Journal of Physiology and Pharmacology
• /
• 제23권5호
• /
• pp.403-409
• /
• 2019

Free fatty acid (FFA) intake regulates blood pressure and vascular reactivity but its direct effect on contractility of systemic arteries is not well understood. We investigated the effects of saturated fatty acid (SFA, palmitic acid), polyunsaturated fatty acid (PUFA, linoleic acid), and monounsaturated fatty acid (MUFA, oleic acid) on the contractility of isolated mesenteric (MA) and deep femoral arteries (DFA) of Sprague-Dawley rats. Isolated MA and DFA were mounted on a dual wire myograph and phenylephrine (PhE, $1-10{\mu}M$) concentration-dependent contraction was obtained with or without FFAs. Incubation with $100{\mu}M$ of palmitic acid significantly increased PhE-induced contraction in both arteries. In MA, treatment with $100{\mu}M$ of linoleic acid decreased $1{\mu}M$ PhE-induced contraction while increasing the response to higher PhE concentrations. In DFA, linoleic acid slightly decreased PhE-induced contraction while $200{\mu}M$ oleic acid significantly decreased it. In MA, oleic acid reduced contraction at low PhE concentration (1 and $2{\mu}M$) while increasing it at $10{\mu}M$ PhE. Perplexingly, depolarization by 40 mM KCl-induced contraction of MA was commonly enhanced by the three fatty acids. The 40 mM KCl-contraction of DFA was also augmented by linoleic and oleic acids while not affected by palmitic acid. SFA persistently increased alpha-adrenergic contraction of systemic arteries whereas PUFA and MUFA attenuated PhE-induced contraction of skeletal arteries. PUFA and MUFA concentration-dependent dual effects on MA suggest differential mechanisms depending on the types of arteries. Further studies are needed to elucidate underlying mechanisms of the various effects of FFA on systemic arteries.

• 대한약침학회지
• /
• 제22권3호
• /
• pp.147-153
• /
• 2019

Objectives: Many studies have been reported the efficacy of intravenous lipid emulsion (ILE) as an antidote on acute lipophilic drug toxicity. Clozapine, highly lipophilic dibenzodiazepine neuroleptics, is an important medication in the schizophrenia therapy regimen. Acute intoxication with antipsychotics is one of the main reasons for the referral of poisoned patients to the hospital. We expected that ILE could be used for the therapy of acute clozapine intoxicated patients. Methods: We used two groups of consisting of six male rats. Both groups received a toxic dose of clozapine (40 mg/kg) intravenously, via the tail vein. After 15 minutes, they were treated with intravenous infusion of 18.6 mg/kg normal saline (NS group), or 18.6 mg/kg ILE 20% (ILE group). We evaluated blood pressure (BP) and heart rate by power lab apparatus through the tail artery, ataxia by a rat rotary circle, seizure scores and death in multiple times after starting clozapine administration. For biochemical and pathological evaluations the samples of tissue and blood were taken. Results: Our results demonstrated that ILE 20% could return hypotension-induced clozapine better than normal saline. Furthermore, ataxia and seizure have rectified more rapidly and deaths reduced. Clozapine administration causes pancreatitis and lung injury but fat emulsion did not show an optimal effect on tissue damages caused by clozapine toxicity. Conclusion: In conclusion, ILE can remove toxic signs of clozapine same as other lipophilic medicines, however, clinical uses of ILE for this intention requires more appraisement to determine the precise implication and safety.