• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.307-312
• /
• 2020

최근 대기압이하 진공 압력 상태에서 운전되는 유동층 반응기는 진공건조 공정이나 플라즈마 화학증착과 같이 감압 유동화가 요구되기에 관심이 증대되어 왔다. 그러나 대기압 이하에서 운전되는 유동층의 수력학적 특성 연구는 많이 연구되지 않았다. 본 연구에서는 대기압 이하에서 운전하는 유동층의 압력강하를 층내 압력을 1.33 에서 101.3kPa 까지 변화시키며 측정하였다. 유동층의 운전 압력이 진공인 상태에서는 최소유동화속도가 압력이 감소함에 따라 증가하며, 이는 기체 밀도와 평균 자유경로 변화와 같은 slip 흐름에 의한 변화이다. 또한 기존의 상압 상태에서 운전되는 유동층의 최소유동화속도 상관식과 비교함으로써 압력 감소에 따른 slip 흐름의 영향 뚜렷하게 나타남을 가리키는 임계 Knudsen 수를 결정하였다. 이로부터 slip 흐름이 주도하기 시작하는 임계 압력을 실험적으로 결정하였다.

• 대한한방내과학회지
• /
• 제31권2호
• /
• pp.388-394
• /
• 2010

Objectives : This study reports two cases of grade four pressure ulcer patients mainly treated by pharmacopuncture Soyeom and Taklisodok-eum. Methods : Two patients with grade four pressure ulcers at the oriental medicine hospital of Woosuk University were treated by pharmacopuncture Soyeom and herbal medicine Taklisodok-eum. Soyeom was treated once a day and Taklisodok-eum was given three times a day. We then observed the patients' appearances of pressure ulcer and changes of blood test results. Results and Conclusions : After ten days or three months each, wound sizes were reduced, tissue regeneration was accelerated and blood tests were improved. In conclusion, it is our belief that pharmacopuncture and herb medicine are effective to treat grade four pressure ulcers, and future studies will be required to ascertain this method on grade four pressure ulcers.

• 대한한방내과학회지
• /
• 제38권5호
• /
• pp.619-627
• /
• 2017

Objectives: The purpose of this case study is to report the effect of oriental medicine on pressure ulcers. Methods: We treated a patient with a pressure ulcer with acupuncture, Jaungo, and Gamisipjeon-tang. We started with herbal medicine only, and then added the acupuncture treatment after one month. We treated the sore for a total of 4 months. We measured the size and depth of the ulcer and graded it with a National Pressure Ulcer Advisory Panel (NPUAP) score once every two weeks. Results & Conclusions: Even though the wound was not cured completely, the total size of the pressure ulcer was reduced and the NPUAP stage was improved from 4 to 3. Therefore, Korean medicine could be an effective treatment for improving pressure ulcers.

• 센서학회지
• /
• 제16권6호
• /
• pp.413-418
• /
• 2007

Uroflowmetry is of great convenience to diagnose benign prostate hypertrophy common in aged men. The urinary flow rate is obtained by weight measurement using load cell, however, sensitive to impact noise. An alternative technique was recently proposed to measure hydraulic pressure instead of weight and demonstrated to introduce significantly reduced noise. In this paper, we described the measured diagnostic parameters between the weight and pressure measuring techniques in 10 normal men. The weight and pressure signals were simultaneously acquired during urination, converted into urine volumes, then differentiated to obtain flow rate signals, which showed very similar waveforms. Diagnostic parameters evaluated by pressure measuring technique were well correlated with the standard weight measuring technique (correlation coefficient > 0.99). Therefore, the new uroflowmetry based on hydraulic pressure measurement can provide accurate diagnostic parameters, which would be clinically valid.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.53-60
• /
• 2014

This paper proposes a control scheme to reduce the power consumption of a variable displacement swash-plate type piston pump supplying oil to a valve-controlled hydraulic cylinder at constant pressure. Whenever flow rate demand was absent, the swash plate angle and the pump speed were changed to the minimum values required to compensate for the internal leakage flow. In response to command signals, the pump speed was changed in proportion to the absolute mean value of the speed component for position commands. At the same time, a pressure regulator was activated to maintain constant system pressure by precisely adjusting the pump speed with the swash plate angle fixed at the maximum. The conventional system consisting of a pressure-compensated variable displacement type pump is driven at a constant speed of 1,800rpm. By comparison, computer simulation and experimental results showed that idling power at stand-by status could be reduced by up to 70% by reducing the pump speed from 1,800rpm to 300rpm and the swash plate angle to the minimum.

• 설비공학논문집
• /
• 제29권3호
• /
• pp.127-133
• /
• 2017

Performance analysis has been carried out on a high side scroll compressor that had a fixed scroll equipped with a circular oil groove on its thrust surface. Oil was supplied to the oil groove through an intermittent opening from a high pressure oil reservoir formed inside the orbiting scroll hub. Oil in the groove was then delivered to both suction and back pressure chambers by pressure differentials and viscous pumping action of the orbiting scroll base plate. Mathematical modeling of this oil groove system was incorporated into a main compressor performance simulation program for an optimum oil groove design. The study findings were as follows. Pressure in the oil groove can be controlled by changing its configuration and the oil passage area. With an enlarged oil passage, the pressure in the oil groove heightens due to an increased flow rate, but the pressure elevation in the back pressure chamber is small, resulting in reduced friction loss at the thrust surface between the two scrolls. On the other hand, by increasing the oil passage area, the oil content in the refrigerant flow increases. Considering all these factors, the energy efficiency ratio could be improved by about 3.6% under the ARI condition by an optimal oil groove design.

• International journal of advanced smart convergence
• /
• 제7권3호
• /
• pp.44-60
• /
• 2018

This study is to identify the effects of hypertension management program at a community health center on the disease-related knowledge, self-efficacy, anthropometric measurements and blood pressure of a hypertensive patient in local community. This study is a quasi-experimental study using nonequivalence control group no-synchronized design in order to verify the effects of the hypertension management program at a community health center on the hypertension-related knowledge, self-efficacy, anthropometric measurements and blood pressure of a hypertensive patient in local community. The result indicated a significant difference between the experimental group and control group in the scores of hypertension-related knowledge (t=-4.25, p<.001), self-efficacy (t=-4.20, p<.001), systolic blood pressure (t=7.70, p<.001) and diastolic blood(t=5.91, p<.001), body weight(t=2.32, p=.026) and abdominal circumference(t=2.17, p=.036). The hypertensive patients' knowledge and self-efficacy were improved, and their weight and abdominal circumference as well as systolic blood pressure and diastolic blood pressure were reduced. Therefore, it was confirmed that multilateral approaches in terms of physical and psychosocial aspects only targeting hypertensive patients were required for managing hypertensive patients in local community.

• 한국지열·수열에너지학회논문집
• /
• 제19권2호
• /
• pp.1-7
• /
• 2023

In this study, in order to reduce the amount of infiltration generated from windows among the heat loss generated in the building, energy shutters were installed on the windows to conduct experiments on the change in internal temperature and amount of infiltration due to the pressure difference between the environmental chamber and the pressure box. As a result of the experiment, when the pressure difference was 0Pa, the initial temperature of the pressure box of window was higher than that of the pressure box of the energy shutter, but when the pressure difference occurred, the internal temperature of the pressure box of the energy shutter was higher. In addition, the amount of infiltration of the energy shutter was lower than that of the windows in all experimental conditions, and it was concluded that the reduction rate of the infiltration load (of the energy shutters) could be reduced by 53.3% compared to that of the windows.

• 한국의상디자인학회지
• /
• 제21권4호
• /
• pp.55-67
• /
• 2019

This study analyzed the fabric and product size of the burn patient's custom compression garment and measured the pressure applied by the garment to assess whether proper pressure is being delivered for treatment. The test clothes were presented to the market by body size and commissioned with the same design. The subjects selected four people close to the average body size of men in their 20s determined by 7th Size Korea. The experiment was conducted by wearing a compression suit, performing activities and measuring changes in the pressure of the garment according to changes in posture. The fabric used for the compressive clothing was not ruptured even at 216 kPa, the elasticity recovery rate was measured between 80.5 and 94.5%. The product dimensions of the experimental clothing varied by up to 8cm from brand to brand, requiring the standardization of compression clothing. The experiment showed that four types of compression suit varied in pressure, and the pressure range, excluding the gastric arm (17.9mmHg), was between 2.5-14.1mmHg, which failed to meet the level of pressurization for treatment purposes. The clothing pressure in the chest area dropped when performing movements rather than standing still. This was interpreted to be a result of reduced the adhesion of the compression suit during operation. The peak pressure (31.68mmHg) and the lowest pressure (2.2mmHg) was noted in the scapula, indicating that no pressure was being transmitted on the vertebrae. The pressure of the garment on the right shoulder blade was elevated in a supine position. Because much time is spent laying down, it is necessary for the pattern design to accommodate for the increased clothing pressure on the shoulder blades. Standardization of the level of pressurization for burn patient's custom-made pressure suits for each stage of treatment is urgently required.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.251-257
• /
• 2000

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaeger's formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along line of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.