• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.69-74
• /
• 2019

The influence of measuring fixtures on the measurement of dielectric and piezoelectric properties of PMN-PT single crystal specimens was investigated. As the pressure of the jig pin which applied the AC electrical signal to the sample decreased, the lower resonance resistance was measured and the higher mechanical quality factor was calculated. The mechanical quality factor was 418 when the spring tension of the jig pin was 20grf, and the value of the quality factor was reduced by half when the spring tension was 200grf. The 4-probe fixture method is unsuitable for measuring piezoelectric properties, but it was suitable for the measurement of dielectric loss. In order to accurately evaluate the piezoelectric properties of PMN-PT, it is necessary to lower the spring tension of the jig pin as much as possible.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.500-506
• /
• 2012

In this study, we developed and optimized hydrophilic polymer based solid dispersion formulations (SDs) for enhancing the aqueous solubility of eprosartan, one of poorly soluble drugs, that has been broadly used for the treatment of high blood pressure. Poly(ethylene glycol) (PEG) and poly(vinyl pyrrolidone) (PVP) based SDs were prepared by hot melting and solvent evaporation methods and the drug/polymer composition varied in the range of 1:1~1:5 with or without poloxamer 407 (P407) as a polymeric surfactant. The SDs prepared by solvent evaporation showed more reduced crystallinity than ones by hot melting, and PVP based SDs showed more enhanced solubility and lower crystallinity than PEG based SDs. Furthermore, it was observed from DSC and PXRD analysis that the SDs with P407 (drug:polymer: P407 = 1:5:1) demonstrated no crystallinity and the most enhanced solubility (more than 3~4 times).

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.442-448
• /
• 2013

In this study, we developed and optimized hydrophilic polymer-based solid dispersion formulations (SDs) using a spray drying method for improving the aqueous solubility of eprosartan, one of poorly soluble drugs that has been broadly used for the treatment of high blood pressure. Hydroxylpropylcellulose (HPC) and poly(vinyl pyrrolidone) (PVP) were used as hydrophilic polymer matrices and poloxamer 407 (P407) added as a polymeric surfactant. Various kinds of solid dispersions with different drug/polymer compositions were prepared and their physico-chemical properties were compared. As the polymer content increased, the drug crystallinity in the SDs significantly decreased and the dissolution properties were enhanced. The PVP based SDs were observed to have relatively reduced crystallinity and an enhanced dissolution rate than HPC-based SDs, due to better miscibility between drug and polymer matrix. For PVP based SDs, the drug crystallinity almost disappeared and the dissolution properties significantly increased by more than 3~7 times.

• Nuclear Engineering and Technology
• /
• v.45 no.2
• /
• pp.257-264
• /
• 2013

In Canada Deuterium Uranium (CANDU)-type nuclear power plants, the reactor is composed of 380 fuel channels and refueling is performed on one or two channels per day. At the time of refueling, the fluid force of the cooling water inside the channel is exploited. New fuel added upstream of the fuel channel is moved downstream by the fluid force of the cooling water, and the used fuel is pushed out. Through this process, refueling is completed. Among the 380 fuel channels, outer rows 1 and 2 (called the FARE channel) make the process of using only the internal fluid force impossible because of the low flow rate of the channel cooling water. Therefore, a Flow Assist Ram Extension (FARE) tool, a refueling aid, is used to refuel these channels in order to compensate for the insufficient fluid force. The FARE tool causes flow resistance, thus allowing the fuel to be moved down with the flow of cooling water. Although the existing FARE tool can perform refueling in Korean plants, the coolant flow rate is reduced to below 80% of the normal flow for some time during refueling. A Flow rate below 80% of the normal flow cause low flow rate alarm signal in the plant operation. A flow rate below 80% of the normal flow may cause difficulties in the plant operation because of the increase in the coolant temperature of the channel. A new and improved FARE tool is needed to address the limitations of the existing FARE tool. In this study, we identified the cause of the low flow phenomena of the existing FARE tool. A new and improved FARE tool has been designed and manufactured. The improved FARE tool has been tested many times using laboratory test apparatus and was redesigned until satisfactory results were obtained. In order to confirm the performance of the improved FARE tool in a real plant, the final design FARE tool was tested at Wolsong Nuclear Power Plant Unit 2. The test was carried out successfully and the low flow rate alarm signal was eliminated during refueling. Several additional improved FARE tools have been manufactured. These improved FARE tools are currently being used for Korean CANDU plant refueling.

• The Korean Journal of Zoology
• /
• v.33 no.2
• /
• pp.191-199
• /
• 1990

Sarcoplasmic reticulum subfractions were isolated from rabbit sarcoplasmic reticulum vesicles using ultracentrifugation in a continuous sucrose gradient (12.5% 50%) after French pressure treatment. And proteins in sarcoplasmic reticulum were detected by SDS-polyacrylamide gel electrophoresis and glycoproteins were identified through the reaction with 1251-concanavalin A.The electrophoresis showed that sarcoplasmic reticulum contained predominantly $Ca^2$+-AThase and calsequestrin along with high affinity calcium binding protein, intrinsic glycoprotein 160 Kd, 94 Kd, 80 Kd, 38 Kd, 34 Kd and 24 Kd proteins. Among these, the protein of about 80 Kd which has been known as one of heat shock proteins was especially enriched in the terminal cistemae of sarcoplasmic reticulum. Meanwhile, autoradiogram of 125 I-concanavalin A bound to the stained gels showed the distribution of glycoproteins which included 160 Kd glycoprotein, 94 Kd glycoprotein, calsequestrin and intrinsic glycoprotein Among these, the protein of about 160 Kd was especially enriched in longitudial sarcoplasmic reticulum and T-tubule, and the protein of about 94 Kd which has been known as one of glucose-regulated proteins was also enriched in T-tubule and sharply reduced in terminal cistemae.

• YAKHAK HOEJI
• /
• v.22 no.3
• /
• pp.163-174
• /
• 1978

Plantaginis seed has been applied in Chinese medicine a as well as in folk remedy. It was advocated that Plantaginis S Semeη exerts good therapeutic effects as anti-inflammatory, antitussive, obstipant and diuretic agent in some cases of alimentary, respiratory a and renal disorders. This study was carried out in order to r re-evaluate the pharmacological action, especially the hypotensive a action of Plantaginis Semen and to elucidate the mechanism of its a action, making use of Plantaginis Semen methanol extract (PME), because its basic pharmacological action, i. e., hypotensive action is n not clear. 1) PME, when administered into intravenous route, elicited the h hypotensive response dependent on the dose of PME given to the rabbit anesthetized with urethane. 2) This hypotensive response of P PME was inhibited by atropine and potentiated by physostigmine, but not influ$\varepsilon$need by vagotomization. 3) Depressor effect of PME was blocked by chlorisondamine, phentolamine, and bethanicline, while not altered by cyproheptadine, diphenhydramine and propran¬olol. 4) The secondary pressor response after blocking the depressor e effect of PME by chlorisondamine was produced, but this pressor response was deminished by atropine. 5) PME augmented the pressor e effect of norepinephrine and angiotensin, on the other hand, reduced b blood pressure elevated by carotid occlusion reflex. 6) These observa¬t tions suggest that PME may induce the hypotensive response via dual mechanisms of parasympathomimetic and sympatholytic action, that the positions of this action are cholinergic peripheral site and sympathetic ganglia respectively, and that PME may possess the pressor activity caused by stimulation of "atropine-sensitive site" which seems to existsin the sympathetic ganglia.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.56-61
• /
• 2000

Fourteen volatile compounds isolated by distillation under reduced pressure from Mustard Leaf(Brassica juncea) Kimchi were identified by the GC/FID and GC/MSD. They were composed of 63% of hydrocarbons and acid and 30% of isothiocyantes and their related components in relative amount; Volatile isothiocyanates and their related components such as 2-phenylethyl isothiocyanate, benzothiazole, 2-methyl benzothiazole and 2-(3H)-benzothiazolone, which are reported to be responsible for the pungent flavor of mustard products, were found in Mustard Leaf Kimchi. These volatile components were remarkably decreased during the fermentation of Mustard Leaf Kimchi.

• Molecules and Cells
• /
• v.37 no.11
• /
• pp.804-811
• /
• 2014

The protease-activated receptor (PAR)-2 is highly expressed in endothelial cells and vascular smooth muscle cells. It plays a crucial role in regulating blood pressure via the modulation of peripheral vascular tone. Although several mechanisms have been suggested to explain PAR-2-induced hypotension, the precise mechanism remains to be elucidated. To investigate this possibility, we investigated the effects of PAR-2 activation on N-type $Ca^{2+}$ currents ($I_{Ca-N}$) in isolated neurons of the celiac ganglion (CG), which is involved in the sympathetic regulation of mesenteric artery vascular tone. PAR-2 agonists irreversibly diminished voltage-gated $Ca^{2+}$ currents ($I_{Ca}$), measured using the patch-clamp method, in rat CG neurons, whereas thrombin had little effect on $I_{Ca}$. This PAR-2-induced inhibition was almost completely prevented by ${\omega}$-CgTx, a potent N-type $Ca^{2+}$ channel blocker, suggesting the involvement of N-type $Ca^{2+}$ channels in PAR-2-induced inhibition. In addition, PAR-2 agonists inhibited $I_{Ca-N}$ in a voltage-independent manner in rat CG neurons. Moreover, PAR-2 agonists reduced action potential (AP) firing frequency as measured using the current-clamp method in rat CG neurons. This inhibition of AP firing induced by PAR-2 agonists was almost completely prevented by ${\omega}$-CgTx, indicating that PAR-2 activation may regulate the membrane excitability of peripheral sympathetic neurons through modulation of N-type $Ca^{2+}$ channels. In conclusion, the present findings demonstrate that the activation of PAR-2 suppresses peripheral sympathetic outflow by modulating N-type $Ca^{2+}$ channel activity, which appears to be involved in PAR-2-induced hypotension, in peripheral sympathetic nerve terminals.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.390-396
• /
• 1998

Neutral stream was generated from Helicon plasma source and was applied to etch silicon for the purpose of preventing physical and electrical damages from the bombardment of charged particles with high translation energy. By installing a permanent magnet and applying positive bias beneath the substrate, the cusp-magnetic and electric fiddles were generated in order to remove the charged particles from the downstream plasma. As a result, the electron density and ion density in the vicinity of the substrate were reduced by 1/1000 and 1/10, respectively. The directional etching of silicon was observed and the etch rate was found to be very low to below 100 $\AA$/min at a pressure of $8.5{\times}10^{-4}$ Torr, when $Cl_2$ and 10% $SF_{sigma}$ etchant gases were used.

• Korean Journal of Materials Research
• /
• v.25 no.1
• /
• pp.21-26
• /
• 2015

CMP(Chemical Mechanical Polishing) Processes have been used to improve the planarization of the wafers in the semiconductor manufacturing industry. Polishing performance of CMP Process is determined by the chemical reaction of the liquid sol containing abrasive, pressure of the head portion and rotational speed of the polishing pad. However, frictional heat generated during the CMP process causes agglomeration of the particles and the liquidity degradation, resulting in a non-uniform of surface roughness and surface scratch. To overcome this chronic problem, herein, we introduced NaCl salt as an additive into silica sol for elimination the generation of frictional heat. The added NaCl reduced the zata potential of silica sol and increased the contact surface of silica particles onto the sapphire wafer, resulting in increase of the removal rate up to 17 %. Additionally, it seems that the silica particles adsorbed on the polishing pad decreased the contact area between the sapphire water and polishing pad, which suppressed the generation of frictional heat.