• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.7
• /
• pp.623-631
• /
• 2000

Effects of the taper angle and the angular velocity of a pulse tube on the enthalpy flow loss associated with the steady mass streaming were analysis by two-dimensional analysis of a pulse tube with variable cross-section. It was shown that the steady mass flux can lead to a large steady second-order temperature. The enthalpy flow loss associated with the steady mass streaming increases as the angular velocity increases. For a pulse tube where the viscous penetration depth is far thinner than the inner radius, the enthalpy flow loss can be significantly reduced by tapering the pulse tube since both the steady mass flux and the steady second-order temperature decrease as the taper angle increase.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.948-949
• /
• 2008

In this paper, an effect on power conversion unit in next generation high-speed train by loss of contact between a contact wire and pantograph supplied electrical power to high-speed train are investigated. One of the most important needs accompanied by increasing the speed of high-speed train is reduced that arc phenomenon by loss of contact brings out EMI. To analysis of conducted EMI source on powering mode of next generation high-speed train, it is necessary electrical modeling system between the contact wire and the pantograph according with loss of contact. Therefore analytical model of a contact wire and a pantograph is constructed to simulate the behaviour of loss of contact. The reliability of the modeling system is verified by simulation implementation on loss of contact.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.138-140
• /
• 2002

This paper deals with an automatic design procedure for the minimization of iron core loss in a synchronous reluctance motor (SynRM). The focus of this paper is the design relative to hysteresis loss on the basis of rotor shape of a SynRM in the same torque density. The coupled Finite Elements Analysis (FEA) & Preisach model have been used to evaluate the iron core loss with the rotor shape. The proposed procedure allows to define the rotor geometric dimensions starting from an existing motor or a preliminary design. The iron loss has been reduced with a rotor design variation.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.791-792
• /
• 2006

In motor design, an important factor is the content of silicon in coss material, which can effect the saturation of magnetic circuit and coss loss. While the content of silicon is high, the core loss will be reduced. At the same time, in order to assure the effective flux, the magnetizing current must be increased and then the copper loss becomes higher. Therefore the material with high content of silicon, which is used in the motor, can not always give the high efficiency. In this paper flux linkage of two different material s10 and s60 is compared according to the operating region and then exciting current to obtain same flux is estimated. By comparing core loss and copper loss between two material with the estimated current and flux linkage, this paper presents a criterion in determining the material for higher efficiency

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.7
• /
• pp.55-61
• /
• 2014

This paper presents a method to reduce the stray loss of core Tie-Plate of distribution power transformer. The method combines a 3-dimensional FEM with PSO(Particle Swarm Optimization) algorithm to determine the shape of the Tie-Plate that minimizes eddy current and flux-leakage losses. To verify the method a 24MVA distribution(cast-resin) transformer was simulated using one objective function and two design variables with some constraints. The final optimized Tie-Plate has nine($3{\times}3$) slots of 10mm width, 15mm thickness and 25mm distance. After four iterations, the Tie-Plate loss was reduced to about 21 % of the original.

• Food Science of Animal Resources
• /
• v.35 no.6
• /
• pp.748-756
• /
• 2015

The effects of sea tangle, sea mustard, hijiki, and glasswort were investigated based on the proximate composition, salinity, cooking loss, emulsion stability, pH, color, texture profile analysis, apparent viscosity, and sensory characteristics of reduced-salt (NaCl) meat batter and frankfurters. The moisture content, salinity, lightness of the meat batter and frankfurter, hardness, gumminess, and chewiness of the reduced-salt frankfurters with sea weeds were lower than the control without seaweed (p<0.05). The protein content, springiness, and cohesiveness of the reduced-salt frankfurters were not significantly different among the treatments (p>0.05). The moisture content, salinity, cooking loss, lightness, redness, hardness, gumminess, and chewiness of treatments with sea tangle and with sea mustard were lower than the control (p<0.05). Among the sensory traits, color was highest in the control (p<0.05). The flavor was also highest in the control. The treatments with sea tangle and with sea mustard samples had high tenderness, juiciness, and overall acceptability scores similar to the control (p<0.05). The results of this study show that the combination of low-salt and seaweed in the formulation successfully improved reduced-salt frankfurters, improving sensory characteristics to levels similar to the regular salt control (1.5%).

• Journal of Periodontal and Implant Science
• /
• v.23 no.1
• /
• pp.170-182
• /
• 1993

The purpose of this study was to evaluate the clinical and microbiological effects of minocycline-loaded polycaprolactone strip on periodontal disease. Ten patients with probing depth (deeper than 5mm) were tested. Of the two periodontal pockets selected from each patient, one randomly selected pocket was treated by the insertion of 30% minocycline-loaded polycaprolactone sttip as the experimental group and the other with a minocycline-free polycaprolactone strip as the control group. All groups were examined by clinical and microbiological methods. 1. Plaque index scores, gingival index scores and sulcular bleeding index scores in both group were significantly reduced from the baseline to 2 weeks. Plaque index scores of experimental group and sulcular bleeding index scores of control group tended to be progressively reduced in all experimental periods. 2. Probing depth amounts in both group were significantly reduced from 4 weeks to 8 weeks. 3. Attachment loss amounts in both group shows no singnificant differences in time. Attachment loss amounts in experimental group tended to be less than those in control group. 4. The number of cocci in both groups were significantly increased in all experimental periods, but that of the non-motile rods were significantly reduced from 2 weeks in experimental group, and from 4 weeks in control group, that of the motile rods were reduced from 4 weeks in experimental group and from 1 week in control group. The number of spirochetes were reduced from I week during all experimental period in experimental group, but there was no changes in control group.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.3
• /
• pp.221-230
• /
• 2020

In actual seawater desalination plant, the pressure loss due to frictional force of pipe is about 3~5 bar. Also, the pressure loss at pipe connection about 1~3 bar. Therefore, the total pressure loss in the pipe is expected to be about 4~8 bar, which translates into 0.111 to 0.222 kWh/㎥ of energy when converted into the Specific Energy Consumption(SEC). Reducing energy consumption is the most important factor in ensuring the economics of seawater desalination processes, but pressure loss in piping is often not considered in plant design. It is difficult to prevent pressure loss due to friction inside the pipe, but pressure loss at the pipe connection can be reduced by proper pipe design. In this study, seawater desalination plant piping analysis was performed using a commercial network program. The pressure loss and SEC for each case were calculated and compared by seawater desalination plant size.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.5
• /
• pp.305-310
• /
• 2009

The amount of heat loss of a refrigerator through the gasket is nearly 30% of total refrigerator heat loss. In this paper, quantitative evaluation analysis of heat loss through gasket is established with numerical heat transfer analysis. Extending the gasket shape to protect the heat loss from the gasket, power consumption is measured by using real refrigerator in a temperature and humidity chamber and suggest the gasket shape to reduce the heat loss. From the present result of the numerical simulation of heat transfer and experiment with varying gasket shape, we are able to reduce the heat loss about 20-40% by using extended gasket and the power consumption can be reduced about 5%.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.385-391
• /
• 2020

Soil loss is a serious problem frequently caused by local torrential rainfalls due to climate change. In particular, soil loss is occurring in agricultural areas rather than urban areas, and many pollutants are introduced into rivers, causing environmental problems. To reduce soil loss, the Ministry of Environment has designated and managed non-point source management areas. The Jaun-district in Hongcheon-gun, which was designed as a non-point pollution source management area in Gangwon-do, is located in the upper stream of Soyang Lake. Most of the agricultural fields are composed of highland agriculture fields. The highland agricultural fields in the Jaun-district are also composed of large-scale farming areas, and the ditches located near the agricultural fields have been illegally used for farmland. Therefore, the local government in Hongcheon-gun is conducting a project to restore the ditches occupied by agricultural fields. However, an analysis of the amount of soil loss that can be reduced by the restoration of the ditches has not been conducted yet. Thus, the purpose of this study was to analyze the effect of reducing the soil loss from the restoration of the ditches used as agricultural fields in the Jaun-district. The SATEEC L Module was used to analyze the reduction in soil loss by ditch restoration. The SATEEC L Module was constructed to estimate the LS factor using Moore and Burch's method after calculating the slope length using the digital elevation model and the maximum allowable slope length. The LS factor and the USLE formula were used to estimate the amount of soil loss that could be reduced by ditch restoration. The analysis showed that the ditch restoration could reduce about 16.6% of the soil loss in the Jaun-district. The results of this study will contribute to the study of methods to reduce soil loss in non-point pollution management areas.