• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.1
• /
• pp.97-106
• /
• 2016

3D virual reality technique develop rapidly such as parts of education, health, national defense, etc. This paper implements an education contents utilizing 3D virtual reality based on HMD. In this paper, contents make up Changdeokgung Palace using to 3Dmax and Unity program, it shows on implemented Helmet Mounted Display. HMD obtain dynamic image from the target source of smart phone. Also, contents consist of service senerio through divided palace position and King's a day's journey especially. Above all, this paper indicate improving performance according to reduced cybersickness and immersion enlargement. And memory capacity reduced by various technique such that file type, compressed file, minimized resource. Proposed technique can obtain dynamic 3D image by HMD implementation at real time basis so that it is possible to use simultaneously multi-source. From the various and practical experiment, it is confirm that proposed 3D VR education system is useful for experience of virtual reality practically.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.894-904
• /
• 2016

This study examines the zero-voltage switching (ZVS) operation of an active-clamped forward converter (ACFC) with a current-doubler rectifier (CDR). The ZVS condition can be obtained with a much smaller leakage inductance compared to that of a conventional ACFC. Due to the significantly reduced leakage inductance, the design is optimized and the circulating loss is reduced. The operation of the ACFC with a CDR is analyzed, and a detailed ZVS analysis is conducted on the basis of a steady-state analysis. From the results, a design consideration for ZVS improvement is presented. Loss analyses of the converters shows that enhanced soft-switching contributes to an efficiency improvement under light-load condition. Experimental results from a 100-W (5-V/20-A) prototype verify that the ACFC with a CDR can attain ZVS across an extended load range of loads and achieve a higher efficiency than conventional ACFCs.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1987.07a
• /
• pp.349-356
• /
• 1987

Insertions of transposable elements in or near a structural gene give rise to null phenotypes, reduced levels of gene expression, or alteration on the tissue-specific pattern of gene expression. Null phenotypes often result from insertions in exons. Reduced levels of gene expression results from insertions in various regions such as promoter region, 5' non-translated region, exon and intron. The maize allele of Adh1-3F1124 is an example of alteration in the tissue-specific patetern of gene expression. Adh1-3F1124 contains a Mu element inserted 31 bp 5' to the transcriptional start site of the wild-type Adh1 activity in seeds and anaerobically-treated seedlings but normal levels in the pollen. Upon the insertion of a transposable element a certain number of host DNA sequences at the insertion site is duplcated. When transposable elements excise, all element sequences are deleted. However, the duplicated host sequences may be left intact or deleted to various extents. This results in null phenotypes, restoration of original levels of gene expression, or altered levels of gene expression. On the basis of effects of transposable-element insertions or excisions on gene expression, the usefulness of transposable ellements for studies on gene expression is discussed.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.8
• /
• pp.509-513
• /
• 2000

This paper deals with the parallel operation of space vector PWM for large capacity inverter system. To enlarge the capacity of inverter system and to reduce the current ripples on inverter output side, two or more inverters are operated in parallel. In this paper, a new parallel operation strategy which minimizes the harmonic distortion of the output stage is described. The proposed method is developed on the basis of the space-vector PWM in order to increase the linearly controllable voltage range. With the help of the proposed voltage synthesis method, the total harmonic distortion of the output stage can be greatly reduced in compared with that of conventional method with sinusoidal PWM or that of the single inverter operation case. The experimental results with reduced scale test show the feasibility of the proposed voltage synthesis method.

• Biomolecules & Therapeutics
• /
• v.2 no.2
• /
• pp.131-135
• /
• 1994

The effect of ginsenoside (GS) from Panax ginseng on basal and nitro-L-arginine suppressed nitric oxide (NO) production was studied in rat kidney. NO production was determined by conversion to [$^{14C}$]=L-citrulline from [$^{14C}$]-L-arginine both in whole kidney and three renal segments; glomerulus, cortex excluding glomerulus (cortex-) and medulla. Nitro-L-arginine (total dose of 30 mg/kg/3 days, i.p.) significantly reduced NO production in whole kidney, which was prevented by GS pretreatment (30 mg/kg/3 days, i.p.). Relative high dose of GS (120 mg/kg/4 days, i.p..) selectively increased NO production in glomerulus and cortex-. Protein content, on wet weight basis, in cortex- and glomerular DNA content were significantly reduced by GS. Our results confirm the existence of constitutive nitric oxide synthase in kidney and it seems that target nephron segment for volume expansion due to GS'NO-mediated vasodilation and for NO production stimulated by GS is cortex including glomerulus.lus.

• Journal of the Korean Mathematical Society
• /
• v.56 no.2
• /
• pp.353-385
• /
• 2019

In this paper, we introduce the notion of combinatorial Auslander-Reiten (AR) quivers for commutation classes [${\tilde{w}}]$ of w in a finite Weyl group. This combinatorial object is the Hasse diagram of the convex partial order ${\prec}_{[{\tilde{w}}]}$ on the subset ${\Phi}(w)$ of positive roots. By analyzing properties of the combinatorial AR-quivers with labelings and reflection functors, we can apply their properties to the representation theory of KLR algebras and dual PBW-basis associated to any commutation class [${\tilde{w}}_0$] of the longest element $w_0$ of any finite type.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.45-49
• /
• 2004

The Navstar Global Positioning System(GPS) is an advanced navigation satelite system for determination of position, velocity and time. It can provide three-dimensional positioning on a global basis, independent of weather, 24 hours per day. Test results show that the carrier phase and pseudorange corrections are suitable for a kinematic GPS system. Using these corrections are more effective than using raw GPS data, since fewer bits are required for transmission Additionally, the number of computation required at the rover is reduced when corrections, rather than raw measurement are transmitted

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.1
• /
• pp.56-62
• /
• 1993

OWT is a tool for block transform coding with wavelet basis functions that overlap adjacent blocks. The OWT can reduce the block effect. In this paper performances of OWT are evaluated for AR model. Some simulation results show that performances are nearly same to DCT, but block effect is reduced to very low level.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.276-280
• /
• 2001

In the development of Chip Mounter(C/M), much interests have risen regarding how to decrease the operation time of mounting the different chips on the printed circuit board(PCB). The existing method to determine the time sequence of teaching C/M was to follow the procedure which was made by the operater. IN this study, a new but effective algorithm has been developed and employed in SCM-130 Chip Mounter and its online programming had reduced the mounting time significantly and provided the basis for the future online CAD/CAM system.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.1
• /
• pp.54-62
• /
• 1983

This paper presents structural analyses performed on the white body of vehicle using the most competitive analyzer, Finite Element Method, and attempts to obtain design criteria of body. By applying the substructure and restart technique to structural model, computation time is reduced. The synthetic processing from modelling to graphic visualization is accomplished by several subprograms, viz., various pre-post processors. On the basis of home-made vehicle modeling, typical cases of accident and service load is analyzed and discussed. The results obtained will guide the designer to design the structure optimally.