• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.189-193
• /
• 2011

The current standard cost for recycling applied under the Extended Producer Responsibility(EPR) institution, is not coping with continuously increased number of obligatory subject items as well as a variety of variable cost changing factors regarding the recycling treatment cost caused by price fluctuation such as increased material and labor cost entirely across the society; changes in recycling treatment process following the developing technologies; and changes in the required work forces and equipments followed by the trends of automated facilities. Despite such various cost fluctuation factors, the current EPR is not coping with the trends, making the re-calculation process difficult, which causes differences between the real treatment cost for recycling. In this study, the analysis was made on main factors affecting on the related cost and the related price changing index was calculated, by conducting the influence evaluation on the standard cost factors of the current standard cost for recycling. Through theses results, more objective standard will be set for the re-calculation of standard cost for recycling to greatly contribute to setting up the midterm and long-term strategies in the future towards efficient institution.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.121-126
• /
• 2011

The provisions regarding the standard cost for recycling stated under the Extended Producer Responsibility (EPR) since 2002, include different and complicated obligatory steps to be taken on a variety of subject items regarding the collection, the transportation and the treatment, making the corporations face in their calculating and executing the standard cost. This study presents more objective calculation scope and standard for the purpose of efficient operation of the standard cost for recycling, in consideration of the general industry perception toward cost issue as well as domestic/overseas case studies regarding the standard cost for recycling. Besides, the study presents the checking items and the calculation contents per step to calculate the standard cost for recycling. Therefore, it is expected not only to be used as the objective standard to calculate the standard cost for recycling, but also to contribute to increasing the work efficiency in the following ongoing re-calculation process and to maintaining the consistent operation of the institution.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.38-44
• /
• 2000

Compared to other waste, waste tire has much discharge quantity and calorie. When we use waste heat from waste tire, it can be definitely better substitute energy than coal and anthracite in high oil price age. To use as a basic data for providing low cost and highly effective heating system, following conclusion was founded. Annual waste tire production was 19,596 million in 1999, Recycling ratio was almost 55% and more than 8.78 million was stored. Waste tire has lower than 1.5% sulfur contain ratio which is resource of an pollution, So it is a waste fuel which can be combustion based on current exhaust standard value without any extra SOx exclusion materials. Waste tire has 9,256Kcal/kg calorific value and it is higher than waste rubber, waste rubber, waste energy as same as B-C oil. When primary and second air quantity was 1.6, 8.0 Nm$^3$/min, dry gas production time was 270min and total combustion time was 360 min. In the SOx, NOx, HC of air pollution material density were lower than exhaust standard value at the back of cyclone and dusty than exhaust standard value without dust collector.

• 한국건축시공학회지
• /
• 제6권2호
• /
• pp.65-72
• /
• 2006

The amount of water demand at large buildings is increasing with the concentration of population to city and a rise in the standard of living in the city area. In this reason the Water Shortage is expected and a problem of water pollution by the city sewerage is increasing. One of method of saving city water demand and city sewer is applying recycling water system witch make used water reuse by purification of water. The application of recycling water system witch make used performed since the application of Lotte World Complex. But the popularization of this system is not activated because of cost problem and feeling of people to the water recycled. So in this study, provide application method for recycling water system by propose the estimation method of optimal sizing of recycling water system.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.57-63
• /
• 2013

PURPOSES: This study is to investigate the Hot In-Place recycling asphalt mixture in Korea using field produced materials. METHODS: Hot In-Place reclaimed asphalt mixture was investigated to evaluate the mixture properties based on various test results such as Marshall Test, Indirect Tensile Test, TSR, and Wheel Tracking Test. These test values were compared with domestic standard specification. RESULTS: The result of the laboratory experiment indicates that the Hot In-Place Reclaimed(HIR) asphalt mixture produced at the field constrution site was satisfied all of the test criteria such as Indirect tensile test, Marshall and TSR test, and wheel tracking test. During the test, the research team found that current HIR system is required an extention of mixing time to improve quality and to reduce variation of sample to sample. Although the current HIR mixture was passed the test criteria, there is a potential capability to enhance the mixture properties as extend mixting time. CONCLUSIONS: Based on these laboratory test results, It would be concluded that domestic HIR mixture's properties were satisfied all standard specification related with evaluation of recycling asphalt mixtures. Based on this case study result, there is a chance to save construction cost and increase the usage of reclaimed asphalt concrete in the future.

• 토지주택연구
• /
• 제14권1호
• /
• pp.135-144
• /
• 2023

현재 LH공사에서 활용하고 있는 건설폐기물 처리대가 기준은 오래전에 개발된 표준 모델을 활용하여 대가를 산정하고 있다. 따라서 본 모델은 폐기물 처리시설의 기술발전과 환경상황을 잘 반영하지 못하는 문제점을 갖고 있다. 따라서 본 연구에서는 이러한 문제점을 개선하기 위해 건설폐기물 중간처리 대가기준에 대한 분석을 실시하였다. 공공발주기관과 LH에서 활용하고 있는 원가계산방식의 현황과 차이점을 분석하였다. 또한 폐기물 중간처리업체의 운영실태에 대한 현장조사 및 전문가 인터뷰 등을 실시하여 현재 활용되고 있는 표준모델에 대한 개선모델을 제시하였다. 건설폐기물의 중간처리를 위한 주요 공정은 건설폐기물의 파쇄기 투입, 파쇄, 선별 및 분별, 이송으로 이루어져 있다. 본 모델에 맞추어 공정운영에 필요한 소요인력과 비용을 분석하여 발주를 위한 적산 기준을 제안하였다. 이 개선된 표준모델은 공공기관의 폐기물 중간처리를 위한 원가계산 기준으로 활용될 수 있으며, 폐기물처리비의 증액이 필요한 것으로 판단하였다.

• 자원리싸이클링
• /
• 제29권4호
• /
• pp.45-50
• /
• 2020

전기·전자제품 생산업자와 판매업자는 자신이 배포한 장비가 속하는 등급에 해당하는 폐전기·전자제품을 직접 수거하거나 한국전자제품자원순환공제조합에 가입하여 공제조합이 대리할 의무를 이행하도록 할 수 있다. 본 연구에서는 분담금의 요율체계를 검토하고, 파악한 문제점과 이에 대한 개선방안을 제시한다. 첫째, 수집비 및 운반비에 대해 회수유형별 작업을 고려하여 표준작업 및 시간을 설정해야 한다. 둘째, 리사이클링센터의 선별방식에 차이가 있으므로, 이들 방식의 차이와 처리하는 제품군 특성을 반영하여 할당인자에 대한 표준원가를 설정해야 한다. 셋째, 방문수거비 예측모형에서 최소값이 아닌 중앙값 또는 평균값으로 결정하여 충분한 규모의 예산을 확보해야 한다. 본 연구는 공제회원이 공제조합에 납부하는 분담금의 문제점을 살펴보고 이에 대한 개선방안을 제시하였다.

• 자원리싸이클링
• /
• 제25권4호
• /
• pp.23-31
• /
• 2016

양양철광산 선광 부산물(폐석, 광미)의 폐기물공정시험기준에 의한 중금속용출량은 환경기준값 보다 낮아 유해성이 없으므로 그 자체를 물질전환법에 의해 순환자원화 하는 데는 문제가 없다. 선광 광미를 시멘트 부원료로 사용할 경우에는 시멘트 품질안정성 차원에서 전 알카리($R_2O$)함량이 포틀랜드 시멘트(KS L 5201) 품질 기준치인 0.6%를 초과하지 않도록 광미 첨가량을 3%이하로 사용하는 것이 좋다고 판단된다. 재활용 점토벽돌(KS I 3013) 1종 규격에 부합되는 비소성 에코벽돌은 무기결합제의 15%를 광미로 그리고 일반잔골재의 100%를 철광산 폐석으로 대체하여 제조 가능하였다. 이처럼 선광 부산물을 시멘트 부원료 및 비소성 에코벽돌로 순환자원화함으로서 광미 적치장의 축소 및 유지관리비용 절감 그리고 에너지 사용 및 $CO_2$ 발생 절감으로 환경적 효과 및 경제적 효과를 동시에 얻을 수 있을 것이다.

• 한국재난정보학회 논문집
• /
• 제4권1호
• /
• pp.86-100
• /
• 2008

It is needed to classify the kinds of construction and demolition(c&d) debris to 6 catagories of waste concrete, waste asphalt concrete, waste wood, scraps, combustible waste and incombustible waste in order to properly do a separate discharge and to estimate unit generation rate in construction site. Also, in this case, the unit treating cost for mixed wastes should be applied with the unit treating cost for combustible waste. The construction standard materials estimation data is used for basic data for estimating unit generation rate. The mixed wastes in this data should be classified to waste wood, combustible waste and incombustible waste, and their ratio is obtained by using the unit generation rate of Asia Pacific Environment and Management Institute and Seoul Metropolitan Development Institute. The waste amounts generated from newly-built construction can be obtained from multiplying the loss rate by the amount of materials used from construction standard estimation data. Also, those from dismantling construction can be obtained by subtracting waste amount generated during newly-built construction from total input amount of materials in newly-built construction. Those in two cases can be used in construction site. It can be used for estimating the amount generated and establishing the treating plan in the case of setting up the policy of waste management and doing the environment impact assessment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1757-1763
• /
• 2011

In recent years, accordance to industrial development project on railway investment, adverse environmental issues of the investment, such as disputed cases about recycling and usage of Ballast Cleaner excavated soil, have been continuously increasing. It will not only enhance the regulation of soil contamination but take considerable time and cost in future. In this study, we investigated soil contamination and burnability with soil of Chungang Line, Taebaek Line, Chungbuk Line, in order to seize a possibility of recycling Ballast Cleaner excavated soil for the natural materials and substantial heat sources, which are necessary resources for cement manufacturing process. As a result of this study, It is found that Ballast Cleaner excavated soil is satisfied with a standard. The excavated soil contains a lot of cement ingredients and fossil fuel dust incurred from freight transportation, so it is expected to use for ingredients of cement and replacement of heat sources.