• Journal of the Korean Geotechnical Society
• /
• v.29 no.9
• /
• pp.81-91
• /
• 2013

This paper investigates the shear properties of bottom ash-crumb rubber mixture reinforced with waste fishing net. Mixtures used in this experiment were prepared at 2 different percentages of crumb rubber (2 mm~10 mm) content (i.e., 0%, 50% by weight of the dry bottom ash). In this study several series of triaxial tests were carried out on the six different specimens : unreinforced bottom ash, reinforced bottom ash with 1 or 2 layers, unreinforced mixture, reinforced mixture with 1 or 2 layers. The experimental results indicated that the shear properties of bottom ash-crumb rubber mixture were strongly influenced by reinforcing layer of waste fishing net and crumb rubber addition. It is shown that the internal friction angle of bottom ash-crumb rubber mixture decrease with addition of crumb rubber due to the compression properties of crumb rubber. However, the internal friction angle of the mixture increased with an increase in reinforcing layer due to interlocking effect and friction between mixture and waste fishing net.

• 한국전기화학회:학술대회논문집
• /
• 2004.06a
• /
• pp.103-108
• /
• 2004

The present paper relates to an apparatus in which all carbonaceous material such as coal, oil, plastics and any substance having carbon atoms as part of its constituents are reformed(gasified) into syngas at temperature above $1,200^{\circ}C$(KR patent No.0391121, and PCT/KR2001/01717 and PCT/KR2004/001020). It comprises a single-stage reforming reactor without catalyst and a syngas burner as shown in Fig.2. syngas is combusted with $O_2$ gas in the syngas bunter to produce $M_2O$ and $CO_2$ gas with exothermic heat. Reaction products are introduced into the reforming reactor, reaction heat from syngas burner elevate the temperature of reactor above $1,200^{\circ}C$, and reaction products reduce carbonaceous material down to CO and $H_2$ gases. Reactants and heat necessary for the reaction are provided through the syngas burner only, Neither $O_2$ gas nor steam are injected into the reforming reactor. Reformer is made of ceramic inner lining and sst outer casing. Multiple syngas burners may be connected to the reforming reactor in order to increase the syngas output, and a portion of the product syngas is recycled into syngas burner. The present reformer as shown in Fig.2 is suitable to gasify carbonaceous wastes without secondary pollutants formed from oxidation. Further, it can be miniaturized to accompany a fuel cell system as shown in Fig.3 The output syngas may be used to drive a fuel cell and a portion of electrical power generated in a fuel cell is used to heat a compact reformer up to $1,200^{\circ}C$ so that gas/liquid fossil fuel can efficiently reformed into syngas. The fuel cell serves as syngas burner in Fig.2. The reformation reaction is sustained through recycling a portion of product syngas into a fuel cell and using a portion of electric power generated to heat the reformer for continuous operation. Such reforming reactor may be miniaturized into a size of PC, then you have a Personal Reformer(PR).

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.75-84
• /
• 2012

In this paper, strength and leaching characteristics of water sludge-added lightweight soils(WALS) considering reinforcing materials(waste fishing net, glue treated waste fishing net and geogrid) and layer(1 or 2 layer) were investigated using unconfined compression test and leaching test. Several specimens of water sludge-added lightweight soil consisted of water sludge, cement, and bottom ash were prepared according to flowability. Reinforcing material added into these specimens were waste fishing net and geogrid. A glue treated waste fishing net was also added in order to increase interlocking between soil mixture and waste fishing net. Strength increased in the order of WALS reinforced by waste fishing net, glue treated waste fishing net, and geogrid. Strength of specimen with double layer-reinforcing material was greater than that of specimen with single layer reinforcing material. Leaching result of WALS was also satisfied with standard of ministry of environment.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.2
• /
• pp.58-67
• /
• 2012

Recently, both the integration of product data during design and production and the effective management of information during full lifecycles have attracted attention from shipyards and ship owners as a result of recycling regulations and a desire for efficient operations. Generally, PLM (Product Lifecycle Management) supports a collaborative environment during the BOL (Beginning of Life) stage, while an ALM (Asset Lifecycle Management) system provides all of the information required to maintain, overhaul, and discard/recycle all or part of a vessel during the MOL (Middle of Life) and EOL (End of Life) stages. The main goal of this paper is to suggest the fundamental configuration of a PALM (Product Asset Lifecylce Management) system and a method that can be used to utilize a marine vessel's lifecycle information during the MOL, emphasizing the maintenance information during the middle of life. The authors also suggest a PALM system configuration in which lifecycle information can be collected by a PEID (Product Embedded Information Device) integrating a microcomputer, sensors, and wireless network communication. Through a prototype PALM system, the suggested features and PALM system configuration are implemented.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.6
• /
• pp.1225-1241
• /
• 2014

Recently, Financial companies implement DLP(Data Leaks Prevention) security products and enforce internal controls to prevent customer information leaks. Accidental data leaks in financial business increase more and more because internal controls are insufficient. Security officials and IT operation staffs struggle to plan countermeasures to respond to all kinds of accidental data leaks. It is difficult to prevent data leaks and to control information flow in business without research applications that handle business and privacy information. Therefore this paper describes business and privacy information flow on applications and how to plan and deploy security container based OS-level and Hypervisor virtualization technology to enforce internal controls for applications. After building security container, it was verified to implement internal controls and to prevent customer information leaks. With security policies additional security functions was implemented in security container and With recycling security container costs and time of response to security vulnerabilities was reduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.145-148
• /
• 2003

Recently, the recycle of CMP (chemical mechanical polishing) slurries have been positively considered in order to reduce the high COO (cost of ownership) and COC (cost of consumables) in CMP process. Among the composition of slurries (buffer solution, bulk solution, abrasive particle, oxidizer, inhibitor, suspension, antifoaming agent, dispersion agent), the abrasive particles are one of the most important components. Especially, the abrasive particles of slurry are needed in order to achieve a good removal rate. However, the cost of abrasives, is still very high. In this paper, we have collected the silica abrasive powders by filtering after subsequent CMP process for the purpose of abrasive particle recycling. And then, we have studied the possibility of recycle of reused silica abrasive through the analysis of particle size and hardness. Also, we annealed the collected abrasive powders to promote the mechanical strength of reduced abrasion force. Finally, we compared the CMP characteristics between self-developed KOH-based silica abrasive slurry and original slury, As our experimental results, we obtained the comparable removal rate and good planarity with commercial products. Consequently, we can expect the saving of high cost slurry.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.288-312
• /
• 1998

In Korea, chemical fertilizers and agricultural chemicals have had a significant impact on food production and these are today thought to be an indispensable part of modern agriculture. On the other hand, socioeconomical and IMF and WTO status in Korea are constant reminders of the vulnerability of our fossil fuel dependent agriculture. A new crop production system to improve economic, environmental and production efficiency must be exploited. Our particular concern has been given to an integrated cropping system involving recycling of crop residues, soil and N management, biological N fixation and multipurpose legumes. As a new integrated crop production system, a no-till direct-sown rice-vetch relaying cropping system has been proposed in this paper. The formulation of this system is based on the conception that N fertilizers being neither limitlessly available nor affordable, the current high-input crop production systems have produced troubled results severe labour shortage ill rural areas, balance of payment, environmental degradation and reduction of human health far exceed economic concerns. A natural and logical consequence is that long-term sustainability of agricultural systems must rely on the use and effective management of internal resources. Based on the information obtained throughout a series of experiments last years we have proved that the no-till direct-sown rice-vetch relaying cropping system dictates biological alternative which can augment, and in some cases replace, N fertilizers. Comprehensive discussions were made for the proposed system and it concluded that the system can offer an economically attractive and ecologically sound means of reducing external nitrogen input and improving the quality and quantity of internal resources, and consequently improving the farmers as well as the national returns.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.90-97
• /
• 2018

The quantities of electronic waste have been increased rapidly, and was caused variety problems such as environmental pollution or dissipation of resource. So, it needed to development of recycling technology about heavy metal in the electronic waste. Meanwhile, filler material (concrete or mortar) was used for shielding radioactive waste, however, it did not used materials that it is proved radiation shielding performance. So, there is a lack of confidence in the shielding performance. Therefore, in this paper, mechanical properties of concrete was evaluated for the applicability using electronic waste as fine aggregate of filler material. From the test results, compressive and flexural strength and elasticity modulus and the micro pore in the $1{\mu}m$ range was significantly affected by substitution of electronic waste, however, it could be improved the performance by using mineral admixture as binder. So, it is shown that the electronic waste could be applicable as fine aggregate of filler material.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.67-73
• /
• 2018

In this paper, risk assessment was conducted to verify self - disposal requirements by landfill for exempted incineration ash by using Resrad Ver.6.5 computer code. The result of risk assessment by landfill for the incineration by-product is that individual dose is $6.91{\times}10^{-2}{\mu}Sv\;y-1$ and collective dose is $3.475{\times}10^{-7}man-Sv\;y-1$. It proved that the result meets reference dose of individual dose $10{\mu}Sv\;y-1$ and collective dose 1 man-Sv y-1 for general public. According to the current 'Nuclear Safety Commission Notice [No. 2014-3]', it states that the exempted wastes can be disposed of by incineration, landfill and recycling. However, most of recently documents and papers related to exempted wastes are disposed of by landfill and recyling and it could not confirm the case of exempt by incineration. If the national consensus is derived and treating the waste by using process of incineration is activated, it could be considered to treat low level of radiation wastewater and activated carbon excluded from exempted waste because of nuclide $^3H$ and $^{14}C$.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.658-670
• /
• 2006

As the educational media tends to be more digitalized and individualized, the learning paradigm is dramatically changing into e-learning. Existing on-line courseware gives a learner more chances to learn when they are home with their own PCs. However, it is of little use when they are away from their digital media. Also, it is very labor-intensive to convert the original off-line contents to on-line contents. This paper proposes education mobile contents(EMC) that can supply the learners with dynamic interactions using various multimedia information by recognizing real images of off-line contents using mobile devices. Content-based image retrieval based on object shapes is used to recognize the real image, and shapes are represented by differential chain code with estimated new starting points to obtain rotation-invariant representation, which is fitted to computational resources of mobile devices with low resolution camera. Moreover we use a dynamic time warping method to recognize the object shape, which compensates scale variations of an object. The EMC can provide learners with quick and accurate on-line contents on off-line ones using mobile devices without limitations of space.