DOI QR코드

DOI QR Code

Shear Properties of Bottom Ash-Crumb Rubber Mixture Reinforced with Waste Fishing Net Using Triaxial Test

삼축압축시험에 의한 폐어망 보강 저회-폐타이어 혼합토의 전단특성

  • Kwon, Soon-Jang (Graduate Student, Dept. of Ocean Engrg., Pukyong National Univ.) ;
  • Kim, Yun-Tae (Graduate Student, Dept. of Ocean Engrg., Pukyong National Univ.)
  • Received : 2013.07.17
  • Accepted : 2013.09.12
  • Published : 2013.09.30

Abstract

This paper investigates the shear properties of bottom ash-crumb rubber mixture reinforced with waste fishing net. Mixtures used in this experiment were prepared at 2 different percentages of crumb rubber (2 mm~10 mm) content (i.e., 0%, 50% by weight of the dry bottom ash). In this study several series of triaxial tests were carried out on the six different specimens : unreinforced bottom ash, reinforced bottom ash with 1 or 2 layers, unreinforced mixture, reinforced mixture with 1 or 2 layers. The experimental results indicated that the shear properties of bottom ash-crumb rubber mixture were strongly influenced by reinforcing layer of waste fishing net and crumb rubber addition. It is shown that the internal friction angle of bottom ash-crumb rubber mixture decrease with addition of crumb rubber due to the compression properties of crumb rubber. However, the internal friction angle of the mixture increased with an increase in reinforcing layer due to interlocking effect and friction between mixture and waste fishing net.

본 연구에서는 폐어망 보강과 폐타이어 분말 혼합에 따른 저회-폐타이어 혼합토의 전단특성을 고찰하였다. 실험에 사용된 저회-폐타이어 혼합토는 저회와 폐타이어 분말(입경 2mm~10mm)의 무게비를 각각 1:0 및 1:0.5로 구성하였으며, 준비된 저회-폐타이어 혼합토에 폐어망 보강 시 층수를 달리하여 보강함으로써 6종류의 시편(무보강 저회, 1층 혹은 2층 보강된 저회, 무보강 혼합토, 1층 혹은 2층 보강된 혼합토)을 준비하였다. 삼축압축시험을 수행한 결과 저회-폐타이어 혼합토의 전단특성은 폐어망 보강 층수와 폐타이어 분말 혼합에 크게 의존하는 것을 알 수 있다. 저회에 폐타이어 분말을 혼합하면 폐타이어 분말 자체의 압축적인 특성에 의해 내부마찰각은 감소한다. 그러나 폐어망 보강층수가 증가함에 따라 저회-폐타이어 혼합토의 내부마찰각은 증가한다. 이것은 폐어망과 저회-폐타이어 혼합토 입자간의 마찰 및 억물림 효과에 기인하는 것으로 판단된다.

Keywords

References

  1. 채동렬 (2012), "경남의 해양쓰레기 피해 저감 방안", 경남발전연구원.
  2. Ashis, K. B., Ambarish G., and Amalendu G. (2009), "Shear strength response of reinforced pond ash", Construction and Building Materials 23, 2009, pp.2386-2393. https://doi.org/10.1016/j.conbuildmat.2008.10.008
  3. Chandrasekaran, B., Broms, B. B., and Wong, K. S. (1989), "Strength of Fabric Reinforced Sand under Axisymmetric Loading", Geotextiles and Geomembranes 8, pp.293-310. https://doi.org/10.1016/0266-1144(89)90013-7
  4. Cho, D. (2006), "Evaluation of the ocean governance system in Korea", Marine Policy, 30(5), 2006, pp.570-579. https://doi.org/10.1016/j.marpol.2005.09.003
  5. Chun, B. S. and Koh, Y. I. (1992), "The Proper Mixing Ratio of Fly Ash to Bottom Ash for Use of Highway Embankment and Subgrade Materials", Korean Society of Civil Engineers 12 (1), pp. 177-186.
  6. Chun, B. S., Lee, E. S., and Koh, Y. I. (1992), "The Strength and Durability of Compacted Coal Ash with Proper Mixing Ratio of Fly Ash to Bottom Ash", Korean Society of Civil Engineers 12 (3), pp.207-213.
  7. Do, J. N., Shin, S. U., Shin, B. W., and Chun, B. S. (2009), "Strength Characteristic of Bottom Ash Mixing Cemnet by Air-entrained Mixture", Korean Geo-Environmental Conferece 2009, 9, pp.364-370.
  8. Epps, Jon A. (1994), "Use of Recycled Rubber Tires in Highways", National Cooperative Highway Research Program Synthesis of Highway Practice No. 198, Transportation Research Board, Washington, DC.
  9. Latha., G. Madhavi and Murthy, Vidya S. (2007), "Effects of reinforcement form on the behavior of geosynthetic reinforced sand", Geotextiles and Geomembranes 25 2007, pp.23-32. https://doi.org/10.1016/j.geotexmem.2006.09.002
  10. Ghazavi, M. and Sakhi, M. A. (2005a), "Influence of Optimized Tire Shreds on Shear Strength Parameters of Sand", International Journal of Geomechanics, Vol.5, No.1, pp.58-65. https://doi.org/10.1061/(ASCE)1532-3641(2005)5:1(58)
  11. Ghazavi, M. and Sakhi, M. A. (2005b), "Optimization of Aspect Ratio of Waste Tire Shreds in Sand-Shred Mixtures Using CBR Tests", Geotechnical Testing Journal, Vol.28, No.6, pp.564-569.
  12. Haeri, S. M., Noorzad, R., and Oskoorouchi, A. M. (2000), "Effect of geotextile reinforcement on the mechanical behavior of sand", Geotextiles and Geomembranes 18, pp.385-402. https://doi.org/10.1016/S0266-1144(00)00005-4
  13. Kaniraj, S. R. and Gayathri, V. (2003), "Geotechnical behavior of fly ash mixed with randomly oriented fiber inclusions", Geotextiles and Geomembranes 21 (3), pp.123-149. https://doi.org/10.1016/S0266-1144(03)00005-0
  14. Krishnaswamy, N. R. and Isaac, N. T. (1944), "Liquefaction Potential of Reinforced Sand", Geotextiles and Geomembranes 13, pp.23-41.
  15. Kwon, S. J., Kim, Y. T., and Ahn, J. H. (2012), "Comparison of Shear Properties of bottom ash-crumb rubber Mixture Considering Reinforcement Types of Waste Fishing Net", Korean Geotechnical Society 28 (9), pp.47-55. https://doi.org/10.7843/kgs.2012.28.9.47
  16. Kim, Y. T. and Kang, H. S. (2008a), "Mechanical Properties of Waste Tire Powder-Added Lightweight Soil", Korean Society of Civil Engineers 28 (4C), pp.247-253.
  17. Kim, Y. T. and Kang, H. S. (2008b), "Experimental Study of Waste Tire Powder-Added lightweigth Soil as Flowable Backfill", The Korean Society of Ocean Engineers 22 (5), pp.112-118.
  18. Kim, Y. T. and Kang, H. S. (2010), "Shear Properties of Waste Tire-Bottom Ash Mixture with Different Particle Size of Waste Tire", Korean Geotechnical Society 26 (2), pp.55.-62.
  19. Kim, Y. T. and Kang, H. S. (2011), "Engineering Characteristics of Rubber-added Lightweight Soil as a Flowable Backfill Material", Journal of Materials in Civil Engineering, ASCE, 23 (9), September1, 2011, pp.1289-1294. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000307
  20. Kim, Y. T., Kim, H. J., and Lee, G. H. (2008), "Mechanical behavior of lightweight soil reinforced with waste fishing net", Geotextiles and Geomembranes 26, pp.512-518. https://doi.org/10.1016/j.geotexmem.2008.05.004
  21. Kuk, K. K., Do, J. N., Ham, T. G., and Chun, B. S. (2009), "Compressibility Characteristics of Crashed Stone and Bottom Ash Mixture by One-Dimensional Compression Test", Korean Society of Civil Engineers Conference 2009, 10, pp.877-880.
  22. Lee, S. J., Shin, M. H., Koh, T. H., and Hwang, S. K. (2009), "Behaviour of Embankment using Bottom Ash-Tire Shred Mixture", Korean Society of Civil Engineers 29 (1C), pp.21-31.
  23. Lee, Y. S. and Kang, S. G. (2000), "An Experimental Study on the Engineering Characteristics of Functional Construction Materials using Fly Ash", Korean Society of Civil Engineers 20 (2C), pp. 147-154.
  24. Lok, M. H. and Yu, H. J. (2006), "Laboratory Study on the Mechanical Behavior of Tire Chip-Sand as Lightweight Backfill", Journal of Geotechnical and Geoenvironmental Engineering, Vol.125, No.2, pp.132-141.
  25. Long, P. V., Bergado, D. T., and Abuel-Naga, H. M. (2007), "Geosynthetics reinforcement application for tsunami reconstruction; evaluation of interface parameters with silty sand and weathered clay", Geotextiles and Geomembranes 25 (4-5), pp.311-323. https://doi.org/10.1016/j.geotexmem.2007.02.007
  26. Park, T. and Tan, S. A. (2005), "Enhanced performance of reinforced soil walls by the inclusion of short fiber", Geotextiles and Geomembranes 23 (4), pp.348-361. https://doi.org/10.1016/j.geotexmem.2004.12.002
  27. Prabakar, J. and Sridhar, R. S. (2002), "Effect of random inclusion of sisal fibre on strength behavior of soil", Construction and Building Materials 16, pp.123-131. https://doi.org/10.1016/S0950-0618(02)00008-9
  28. Sawwaf, M. A. E. (2007), "Behavior of strip footing on geogridreinforced sand over a soft clay slope", Geotextiles and Geomembranes 25 (1), pp.50-60. https://doi.org/10.1016/j.geotexmem.2006.06.001
  29. Seo, M. W., Kim, B. J., and Ha, I. S. (2009), "Comparison of Shear Strength of Coarse Materials Measured in large Direct Shear and Large Triaxial Shear Tests", Korean Geo-Enviornmental Society 10 (1), pp.25-34.
  30. Takehama, S. (1990), "Estimation of damage to fishing vessles caused by marine debris, base on insurance statistics", Proceedings of the Second International Conference on Marine Debris, Honolulu, Hawaii, 2-7 April 1989, US Department of Commerce, 1990, pp. 792-809.
  31. Venkatappa Rao, G., R. K., and Ujwala, D. (2005), "Strength Characteristics of Sand Reinforced with Coir Fibers and Coir Geotextiles", Electronic Journal of Geotechnical Engineering, USA 10/G http://www.ejge.com/
  32. Vidal, H. (1969), "The Principle of Reinforced Earth", Highway Research Record No. 282.
  33. Yetimoglu, T., Inanir, M., and Inanir, O. E. (2005), "A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clay", Geotextiles and Geomembranes 23 (2), pp. 174-183. https://doi.org/10.1016/j.geotexmem.2004.09.004
  34. Yetimoglu, T. and Salbas, O. (2003), "A study on shear strength of sands reinforced with randomly distributed discrete fibers", Geotextiles and Geomembranes 21, pp.103-110. https://doi.org/10.1016/S0266-1144(03)00003-7
  35. Youwai, S. and Bergado, D. T. (2003), "Stength and Deformation Characteristics of Shredded Rubber Tire-Sand Mixtures", Canadian Geotechnical Journal, Vol.40, No.2, pp.254-264. https://doi.org/10.1139/t02-104
  36. Zhang, M. X., Javadi, A. A., and Min, X. (2006), "Triaxial tests of sand reinforced with 3D inclusions", Geotextiles and Geomembranes 24 (4), pp.201-209. https://doi.org/10.1016/j.geotexmem.2006.03.004
  37. Zhang, M. X., Zhou, H., Javadi, A. A., and Wang, Z. W. (2008), "Experimental and theoretical investigation of strength of soil reinforced with multi-layer horizontal-vertical orthogonal elements", Geotextiles and Geomembranes 26 (1), pp.1-13. https://doi.org/10.1016/j.geotexmem.2007.06.001
  38. Zornberg, J. G., Cabral, A. R., and Viratjandr, C. (2004), "Behavior of Tire Sherd-Sand Mixtures", Canadian Geotechnical Journal, Vol.41, No.2, pp.227-241. https://doi.org/10.1139/t03-086

Cited by

  1. 인발시험에 의한 저회에 보강된 폐어망의 인발특성 연구 vol.12, pp.4, 2013, https://doi.org/10.12814/jkgss.2013.12.4.057
  2. 폐어망 보강 깊이에 따른 모래지반의 지지력 특성 vol.29, pp.1, 2013, https://doi.org/10.5574/ksoe.2015.29.1.078