• Journal of Distribution Science
• /
• v.17 no.10
• /
• pp.125-134
• /
• 2019

Purpose - Environment-friendly behaviors are diverse and can be motivated by different factors. For example, magnitude of factors affecting recycling behavior could be different from those affecting purchasing of environmentally-friendly products. In this study, the focus is on usage satisfaction of consumers who have purchased environmentally-friendly products. Research design, data, and methodology - For this purpose, data were collected from a total of 345 users of environmentally-friendly products, consisting of 177 users of electric vehicles and 168 users of environmentally-friendly detergents. The study analyzed the relationships among consumer's innovation propensity, consumer's environmental concern, and usage satisfaction. In addition, the moderating effect of the product's innovativeness was examined. Results - The result shows that there is a relationship between consumer's innovation propensity and consumer's environmental concern. In particular, it is shown that both consumer's innovation propensity and consumer's environmental concern have positive effects on usage satisfaction. Further, there was a moderating effect of the product's innovativeness. Namely, products rated higher in innovativeness showed a greater effect of consumer's innovation propensity on usage satisfaction. The degree of the product's innovativeness also affected the directional paths of the relationships. In the electric vehicle (i.e., high product innovativeness) case, consumer's innovation propensity had a direct effect on usage satisfaction, as well as an indirect effect through consumer's environmental concern. In the environmentally-friendly detergent (i.e., low product innovativeness) case, consumer's innovation propensity only had an indirect effect on usage satisfaction, through consumer's environmental concern. Conclusions - Theoretical contributions of this study are as follows. Foremost, this is the first study that suggests an existence of a relationship between consumer's innovation propensity and consumer's environmental concern. Second, this study showed the positive effect of consumer's innovation propensity on usage satisfaction of environmentally-friendly products. Third, this study expanded the scope of previous studies by showing the interaction between consumer's innovation propensity and consumer's environmental concern. Lastly, this study showed that the effect of these variables on usage satisfaction can differ by the degree of innovativeness of the environmentally-friendly product. The results of the study will have implications for marketers and policy makers in formulating marketing activities and policies.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.227-234
• /
• 2016

In this study, asphalt paving filler, which satisfies the KS standards, were prepared from industrial by-products, such as fly ash generated from thermal power plants, cogeneration ash generated from cogeneration plants, and desulfurized gypsum generated from the flue-gas desulfurization process. The properties of the prepared mixed filler and the existing limestone filler were compared through laboratory tests for preparing asphalt mixture using each filler. In addition, asphalt pavement field tests were conducted using the limestone filler and mixed filler. The dynamic stability, Marshall stability, tensile strength ratio, saturation, porosity, and flow value of the asphalt mixtures used in the field test were evaluated, as was done in the laboratory test. The laboratory and field construction test results revealed outstanding tensile strength ratio, Marshall stability and dynamic stability when using the prepared filler than for the existing limestone filler. Through optimization of the mixing design, the possibility of developing fillers, which the characteristics of the existing limestone filler, was confirmed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.250-258
• /
• 2016

Until now, the construction material industry has been recognized as a typical environmental destruction industry. However, recently, in order to reduce $CO_2$ emission, the main cause of environmental problems, lots of studies have been done about recycling industrial by-products and construction wastes. Therefore, the purpose of this study is to confirm whether it is possible to use as an alternative material in cement production process as a part of the development of recycled cement using an inorganic construction waste. For this study, the inorganic construction wastes was collected and analyzed each chemical component by XRF(X-ray Fluorescene). Also, the inorganic construction wastes were combined based on the chemical component of the cement, to perform this analysis. As a result, when the inorganic construction wastes was properly combined, it is possible to consider the development of the recycled cement used the inorganic construction wastes.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.343-349
• /
• 2004

Laser-aided debonding has advantages in that the heat produced is localized and controlled, the debonding tool is not heated, and it can be used for the removal of various types of ceramic brackets, regardless of their design. However, the range of safe power usage for laser-aided debonding has not vet been confirmed. The Purpose of this study was to evaluate the histologic changes of pulpal tissue in a rabbit's incisor after Nd-YAG laser-aided ceramic bracket debonding at different levels of power. The result were as follows: 1. At 3-5W Nd-YAG laser power level and 3 seconds of exposure time, the ceramic bracket debonding procedure was not easy. At 5W of power a tie-wing fracture occurred on one bracket during debonding using Weingart plier. The histologic section of pulp represented no adverse changes. 2. At 7-13 W power level and less than 5 seconds of exposure time, the debracketing procedure was done easily and bracket facture did not occur. The histologic section of pulp represented mild and reversible changes. All the results were reversible and no pulpal degeneration or necrosis occurred. Considering the results, it appears that the laser-aided debonding technique is a safe method that does not result in irreversible pulpal changes, softens bracket bonding resin within a saie range of power and exposure time, and is useful for ceramic bracket recycling by lowering the tie- wing fracture rate.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.3
• /
• pp.219-228
• /
• 2012

A long-term R&D program for HLW disposal technology development was launched in 1997 in Korea and Korea Reference disposal System(KRS) for spent fuels had been developed. After then, a recycling process for PWR spent fuels to get the reusable material such as uranium or TRU and to reduce the volume of radioactive waste, called Pyro-process, is being developed. This Pyro-process produces several kinds of wastes including metal waste and ceramic waste. In this study, the characteristics of the waste from Pyro-process and the concepts of a disposal container for the wastes were described. Based on these concepts, thermal analyses were carried out to determine a layout of the disposal area of the ceramic wastes which was classified as a high level waste and to develop the disposal system called A-KRS. The location of the final repository for A-KRS is not determined yet, thus to review the potential repository domains, the possible layout in the geological characteristics of KURT facility site was proposed. These results will be used in developing a repository system design and in performing the safety assessment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.481-487
• /
• 2017

The purpose of this study is to develop the hybrid sound-absorbing materials that is made from organic polyurethane sponge impregnated with inorganic binder solutions. The inorganic slurry which is made from ${\alpha}$-hemihydrate gypsum mixed with 60% water, and various additives including plasticizer are used as binder. The test specimens are prepared and tested for sound absorption performance by the impedance tube methods. From the test results, noise reduction coefficient(NRC) of development materials specimen bound by the inorganic binder slurry is 0.41. They are 2 times or more higher than commercial products specimens bound by organic materials only which have NRC values in the range of 0.14 to 0.28. The polyurethane sponge specimens impregnated with inorganic gypsum slurry binder have a good balance between performance and cost, and have proper properties in density, thermal conductivity, non-combustible, and absence of harmful substances as sound-absorbing internal boards for noise barrier wall. It is apparent that the good sound absorption materials can be produced according to the optimum mix design that is recommended from this study.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.197-208
• /
• 2003

This paper is to determine the possibility of re-using waste concrete from Incheon city area. The strength test was conducted with five aggregate compounds which was replaced a natural aggregate with recycled aggregate. After checking the physical characteristics of recycled aggregate compounds, the mix design of recycled concrete was conducted. For the relatively comparison between natural and recycled compounds, while the unit aggregate weight was changed, other conditions were fixed. The freezing and thawing test which included fly-ash and super-plastezer were performed to check the durability and workability when recycling waste concrete. In the physical characteristics of recycled aggregate, it was found that the specific gravity of recycled coarse aggregate and recycled fine aggregate satisfied the first grade of recycle specification(KS), and all compounds of recycled aggregate also satisfied the second grade of absorption specification, Especially up to the 50% substitution of recycled aggregate is equal to or a bit lower than that of convention aggregate. In comparison with conventional concrete, the recycled concrete is lower than maximum by 7% in compressive strength decreasing rate after freezing-thawing test. From now, although most of recycled concrete was used to the building lot, subgrade, asphalt admixture, through the result. It was proved that possibility of re-using recycled aggregate as the substructure of bridge, retaining wall, tunnel lining and concrete structure which is not attacked the drying shrinkage severely.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2012

This paper describes the batch test results for application of CFW(Carbonized Foods Waste), which was produced by the process of recycling waste, in PRB system. It analyzed characteristics for individual adsorption and competitive adsorption of Cu and Zn in heavy metals. In individual adsorption, the Langmuir and Freundlich models are used to predict adsorption equilibrium. The adsorption equilibrium corresponded to the Langmuir's and the maximum adsorption amount of Cu was greater than Zn's. The removal of heavy metal is predicted that Zn was faster than Cu. The reaction rate of Zn based on Pseudo-first-order and Pseudo-second-order was faster than Cu's, and the result of competitive adsorption test confirmed that the adsorption amount of Zn is reduced under similar condition for competitive adsorption rate of Cu and Zn. When Zn solution is mixed in Cu, Cu is adsorbed 86% on CFW. However, the adsorption of Zn is 19% on the contrary condition. Therefore, the removal characteristics of separate heavy metal should be considered for efficient treatment of contaminated ground based on complex heavy metal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.140-149
• /
• 2017

Recently, it has become necessary to consider climate change when managing multi-purpose river functions. However, in terms of domestic rivers, the management of national and local rivers is separated and the river information cannot be integratedly handled. Especially, it is not sufficient to collect and update information by recycling reports for design and construction. In addition, the basic information of the rivers is dependent on the GIS-based RIMGIS system, but the reliability of the information is deteriorating due to the construction of spatial information using the river basement planning results. The purpose of this study is to investigate the current status of the information system with regard to the maintenance and operation of the river facilities. Through the verification of actual cases, the optimal solution was suggested from the point of view of practical information. As a result, we constructed an information system for the reliable maintenance of river facilities and examined the integrated information management plan. The results of this study can be used to improve the existing information and technical and institutional procedures for the integrated maintenance and operation of river facilities. It will be helpful to introduce the BIM as well as solve to the information gap with other fields through the establishment of an information framework to improve the information construction of river areas.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.669-685
• /
• 2012

This study was carried out to investigate the nutrient value and yield response of corn, barley, and sudangrass by the application of anaerobic liquid fertilizer in two tidal land soil in order to design the resource recycling agricultural system between livestock and forage crop cultivation in a environment friendly agricultural region. Forage crop yields at reclaimed tidal soil during were at the level of 64~76% comparing with forage crop yields at upland soil in the cropping system of corn, barley, and sudangrass. And yields of forage crops were in the order of barley > corn > sudangrass in the cultivated cropping system for 2 year. Relative feed values (RFVs) of forage crops were 88%~106% for corn, 90%~111% for barley, and 91%~113% for sudangrass, and the carrying capacity of beef cattle (Hanwoo) was 5.8~8.6 head/year/ha for the corn-barley cropping system of one year, and 4.8~6.7 head/year/ha for the barley-sudangrass cropping system of one year. Also, carrying capacity of beef cattle (Hanwoo) was highest in the application level of anaerobic liquid fertilizer 200%.