• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.87-97
• /
• 2012

This paper presents a method of estimating the setting time of cement mortar incorporating recycled aggregate powder (RP) and cement kiln dust (CKD) at various curing temperatures by applying an equivalent age method. To estimate setting time, the equivalent age using apparent activation energy (Ea) was applied. Increasing RP and CKD leads to a shortened initial and final set. Ea at the initial set and final set obtained by Arrhenius function showed differences in response to mixture type. These were estimated to be from 10~19 KJ/mol in all mixtures, which is smaller than those of conventional mixture ranging from 30~50 KJ/mol. Based on the application of Ea to Freisleben Hansen and Pederson's equivalent age function, equivalent age is nearly constant, regardless of curing temperature and RP contents. This implies that the concept of maturity is applicable in estimating the setting time of concrete containing RP and CKD. A high correlation was observed between estimated setting time and measured setting time. A multiregression model was provided to determine setting time reflecting RP and CKD. Thus, the setting time estimation method studied herein can be applicable to concrete incorporating RP and CKD in the construction field.

• 자원리싸이클링
• /
• 제28권6호
• /
• pp.9-17
• /
• 2019

4차산업 혁명과 에너지 신산업 등의 성장에 따라 희유금속의 사용이 계속하여 증가하고 있으며, 희유금속의 사용 증가에 따라 희유금속의 재활용이 중요해 지고 있다. 본 논문에서는 희유금속 중 하나인 주석 소재의 국내·외 품질 기준 현황과 재활용된 주석의 성능 테스트에 관해 조사하였다. 성능 테스트 결과, 천연자원 주석과 재활용된 주석의 성능 차이는 없는 것으로 분석되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 추계학술발표논문집
• /
• pp.168-182
• /
• 2001

A new concept of stock preparation for the increase of bending stiffness in paper and board was proposed. The 'stiff' fibers, which were mechanically not treated or treated slightly to remove fiber curls, were combined with extensively refined fibers (ERF) to produce higher stiffness papers than those where the whole fibers were refined. The combination of 'stiff' fibers and extensively refined fibers produced higher stiffness at the same tensile strength than the control furnish, in which all the fibers are refined together. In this concept, the fibers from recycled papers could be as much useful as the virgin fibers as long as they are stiff enough or they can produce highly bondable fiber fractions by extensive refining. Use of the concept in real paper mill needs considerations such as increase of refining energy, slower drainage, and added drying burden, but savings of wood fibers, utilization of more recycled fibers, and increase of physical properties may offset the negative concerns. The success of this concept implementation in mills, therefore, depends on the wood fiber market around the mills and the proper decision making for the papermakers about how to apply this concept.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.21-29
• /
• 2005

Increase in the utilization rate of recycled paper has significantly increased the problem associated with stickies. Despite the effort to eliminate contaminants from recycled furnishes, stickies are still the most serious obstacle in using recycled paper. The amount of micro stickies that are too small to be eliminated by screening, tends to increase significantly as the closure level of white water system is increased and the quality of raw material deteriorates. To establish a process efficient in removing micro stickies is strongly required. In this study, the surface characteristic of micro stickies was investigated with contact angle measurement. Surface energies of MCC, PSA film and model micro stickies were 53.37 mN/m, 29.75mN/m, and 29.63mN/m, respectively. This indicates that the surface characteristic of MMS is very similar to PSA. Thus, solvent coating of PSA and evaporation of the solvent provided excellent model micro stickies for flotation experiment.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.63-69
• /
• 2002

A new concept of stock preparation for the increase of bending stiffness in paper and board was proposed. The "stiff" fibers, which were mechanically not treated or treated slightly to remove fiber curls, were combined with extensively refined fibers (ERF) to produce higher stiffness papers than those where the whole fibers were refined. The combination of "stiff" fibers and extensively refined fibers produced higher stiffness at the same tensile strength than the control furnish, in which all the fibers are refined together. In this concept, the fibers from recycled papers could be as much useful as the virgin fibers as long as they are stiff enough or they can produce highly bondable fiber fractions by extensive refining. Use of the concept in real paper mill needs considerations such as increase of refining energy, slower drainage, and added drying burden, but savings of wood fibers, utilization of more recycled fibers, and increase of physical properties may offset the negative concerns. The success of this concept implementation in mills, therefore, depends on the wood fiber market around the mills and the proper decision making for the papermakers about how to apply this concept. apply this concept.

• Computers and Concrete
• /
• 제26권4호
• /
• pp.367-375
• /
• 2020

Today, the use of special technologies in the admixture of concrete has made tremendous progress, but the problem that has always existed in the construction of concrete members is the brittleness and lack of loading bearing after cracking, which leads to reduced strength and energy absorption. One of the best ways to fix this is to reinforce the concrete with steel fibers. Steel fibers also control cracks due to dry shrinkage, reduce structural crack width, and improve impact resistance. In this study, recycled steel fibers from worn tires have been used in the manufacture of concrete samples, the secondary benefits of which are the reduction of environmental pollution. One of the disadvantages of steel fiber reinforced concrete is the corrosion of steel fibers and their deterioration in harsh environments such as coastal areas. Corrosion caused by chlorine ions in metal fibers causes deterioration and early decommissioning of structures in corrosive environments. In this study, the effect of the dosage of steel fibers (dosages of 15, 30, and 45 kg of fibers per cubic meter of concrete) and aspect ratio of fibers (aspect ratio of 25 and 50) on compressive and flexural strength of concrete samples are investigated. In the following, the effect of fiber corrosion on the results of the mechanical properties of concrete samples is examined. The results show that the increase in fiber causes a relative increase in compressive strength, and a significant increase in flexural strength, and corrosion of steel fibers without reducing workability reduces compressive strength and flexural strength by up to 6 to 11%, respectively.

• Earthquakes and Structures
• /
• 제14권1호
• /
• pp.73-84
• /
• 2018

Low cyclic loading tests are conducted on the steel reinforced recycled concrete (SRRC) column-steel (S) beam composite frame joints. This research aims to evaluate the earthquake damage performance of composite frame joints by performing cyclic loading tests on eight specimens. The experimental failure process and failure modes, load-displacement hysteresis curves, characteristic loads and displacements, and ductility of the composite frame joints are presented and analyzed, which shows that the composite frame joints demonstrate good seismic performance. On the basis of this finding, seismic damage performance is examined by using the maximum displacement, energy absorbed in the hysteresis loops and Park-Ang model. However, the result of this analysis is inconsistent with the test failure process. Therefore, this paper proposes a modified Park-Ang seismic damage model that is based on maximum deformation and cumulative energy dissipation, and corrected by combination coefficient ${\alpha}$. Meanwhile, the effects of recycled coarse aggregate (RCA) replacement percentage and axial compression ratio on the seismic damage performance are analyzed comprehensively. Moreover, lateral displacement angle is used as the quantification index of the seismic performance level of joints. Considering the experimental study, the seismic performance level of composite frame joints is divided into five classes of normal use, temporary use, repair after use, life safety and collapse prevention. On this basis, the corresponding relationships among seismic damage degrees, seismic performance level and quantitative index are also established in this paper. The conclusions can provide a reference for the seismic performance design of composite frame joints.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권3호
• /
• pp.207-215
• /
• 2015

환경문제를 야기시켰던 해상용 FRP재활용에 대해 지난 10여 년간 다양한 국가적 지원이 이루어져서 폐FRP로부터 콘크리트 강화용 섬유 제작이 진행되어 왔다. 이렇게 제작된 강화 콘크리트에 대해 구조적 능력까지 시험한 바 있다. 시험 테스트 결과 재활용 FRP 가루를 사용한 콘크리트는 고강도 콘크리트의 압축강도를 감소시키지 않았을 뿐 만 아니라, 고강도 콘크리트의 내폭 특성을 상당히 증대시켰다. 그러나 폐FRP로부터 매트층의 분리 방법이 안정화되지 않았기 때문에 폐FRP 섬유 가루의 특성에 대한 연구는 종결되지 않았다. 본 연구는 폐FRP로부터 매트층을 분리하는 효과적이며 친환경적인 새로운 방법에 관한 것이며, 이것은 내폭성이 강한 제품이나 구조물에 적합한 FRP섬유가루 생산 공정에 유용한 재활용 공정이라 생각한다.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3441-3449
• /
• 2023

We determined the radiation shielding properties for 10CaO-xPbO-(90-x) deteriorated silica gel (DSG) glass system (x = 20, 25, 30, 35, 40, and 45 mol.%). The mass attenuation coefficient (MAC) has been estimated at photon energies of 74.23, 97.12, 122, 662, 1173, and 1332 keV using a narrow beam X-ray attenuation and transmission experiment, the XCOM program, and a PHITS simulation. The obtained MAC values were applied to estimate the half value layer (HVL), mean free path (MFP), effective atomic number, and effective electron density. Results show that the MAC value of the studied glasses ranges between 0.0549 and 1.4415 cm²/g, increases with the amount of PbO, and decreases with increasing photon energy. The HVL and MFP values decrease with increasing PbO content and increase with increasing photon energy. The recycled glass, with the addition of PbO content (20-45 mol.%), exhibited excellent radiation shielding capabilities compared to standard barite and ferrite concretes and some glass systems. Moreover, the experimental radiation shielding parameters agree with the XCOM and PHITS values. This study suggests that this new waste-recycled glass is an effective and cost-saving candidate for X-ray and gamma-ray shielding applications.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.26-32
• /
• 2020

건설자원의 고갈과 콘크리트 폐기물의 증가에 따라 콘크리트 재활용은 선택적 사항이라기보다는 필수적 사항으로 되어 가고 있다. 콘크리트 재활용에 대한 연구는 오래 동안 다양한 관점에서 수행되어 왔다. 그러나 여러 나라의 기준이나 권고사항을 보면 순환골재 콘크리트의 적용에는 순환골재의 비율이나 순환잔골재의 사용금지 등과 같은 많은 제한사항이 있다. 본 연구에서는 구조부재에서 천연골재 콘크리트와 순환골재 콘크리트를 분리타설하는 방법에 대한 적절성을 알아보고자 하였다. 순환골재콘크리트의 제작 시 굵은골재의 치환비율은 50, 100%로 하였고 두 콘크리트의 접합면에는 교섭을 도입하였다. 순환골재 콘크리트를 제작하는 과정에서 순환골재를 처리하거나 혼화재를 첨가하지 않았다. 두 콘크리트 접합면의 전단강도를 평가하기 위해 등분포하중으로 재하한 2면전단 시험법을 채택하였다. 실험결과에 따르면 골재치환율이 큰 시험체가 전단강도 대 압축강도 비가 크게 나왔는데 이는 굵은골재의 크기와 전단절단면의 조도에 기인한 것으로 보인다. 여러 가지 변수들의 영향을 알아보기 위한 후속연구가 필요하며 그와 같은 연구 활동을 진행 중이다.