Browse > Article
http://dx.doi.org/10.12989/eas.2018.14.1.073

Seismic damage assessment of steel reinforced recycled concrete column-steel beam composite frame joints  

Dong, Jing (School of Civil Engineering and Architecture, Xi'an University of Technology)
Ma, Hui (School of Civil Engineering and Architecture, Xi'an University of Technology)
Zhang, Nina (School of Civil Engineering and Architecture, Xi'an University of Technology)
Liu, Yunhe (School of Civil Engineering and Architecture, Xi'an University of Technology)
Mao, Zhaowei (School of Civil Engineering and Architecture, Xi'an University of Technology)
Publication Information
Earthquakes and Structures / v.14, no.1, 2018 , pp. 73-84 More about this Journal
Abstract
Low cyclic loading tests are conducted on the steel reinforced recycled concrete (SRRC) column-steel (S) beam composite frame joints. This research aims to evaluate the earthquake damage performance of composite frame joints by performing cyclic loading tests on eight specimens. The experimental failure process and failure modes, load-displacement hysteresis curves, characteristic loads and displacements, and ductility of the composite frame joints are presented and analyzed, which shows that the composite frame joints demonstrate good seismic performance. On the basis of this finding, seismic damage performance is examined by using the maximum displacement, energy absorbed in the hysteresis loops and Park-Ang model. However, the result of this analysis is inconsistent with the test failure process. Therefore, this paper proposes a modified Park-Ang seismic damage model that is based on maximum deformation and cumulative energy dissipation, and corrected by combination coefficient ${\alpha}$. Meanwhile, the effects of recycled coarse aggregate (RCA) replacement percentage and axial compression ratio on the seismic damage performance are analyzed comprehensively. Moreover, lateral displacement angle is used as the quantification index of the seismic performance level of joints. Considering the experimental study, the seismic performance level of composite frame joints is divided into five classes of normal use, temporary use, repair after use, life safety and collapse prevention. On this basis, the corresponding relationships among seismic damage degrees, seismic performance level and quantitative index are also established in this paper. The conclusions can provide a reference for the seismic performance design of composite frame joints.
Keywords
steel reinforced recycle concrete columns; steel beams; joints; seismic performance level; seismic damage model;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Banon, H. and Veneziano, D. (1982), "Seismic safety of reinforced concrete members and structures", Earthq. Eng. Struct. Dyn., 10, 179-93.   DOI
2 Carneiro, J.A., Lima, P.R.L. and Leite, M.B. (2014), "Compressive stress-strain behavior of steel fiber reinforced-recycled aggregate concrete", Cement Concrete Compos., 46(2), 886-893.
3 Choi, W.C. and Yun, H.D. (2012), "Compressive behavior of reinforced concrete columns with recycled aggregate under uniaxial loading", Eng. Struct., 41(8), 285-293.   DOI
4 Desprez, C., Mazars, J., Kotronis, P. and Paultre, P. (2013), "Damage model for FRP-confined concrete columns under cyclic loading", Eng. Struct., 48(3), 519-531.   DOI
5 Gao, X.W. and Bao, A.B. (1985), "Probability model of seismic action and its statistical parameters", Earthq. Eng. Eng. Vib., 5(1), 13-22.
6 GB 50023 (2009), Standard for Seismic Appraisal of Buildings, State Standard of the People's Republic of China, Beijing, China.
7 GB 50223 (2008), Standard for Classification of Seismic Protection of Building Constructions, State Standard of the People's Republic of China, Beijing, China.
8 Gosain, N.K., Brown, R.H. and Jirsa, J.O. (1977), "Shear requirements for load reversal on reinforced concrete members", Earthq. Eng., 103(7), 1461-76.
9 Kappos, A.J. (1997), "Seismic damage indices for RC buildings: evaluation of concepts and procedures", Prog. Struct. Eng. Mater., 1(1), 78-87.   DOI
10 Kostinakis, K. and Morfidis, K. (2017), "The impact of successive earthquakes on the seismic damage of multistorey 3D R/C buildings", Earthq. Struct., 12(1), 1-12.   DOI
11 Kou, S.C., Poon, C.S. and Wan, H.W. (2012), "Properties of concrete prepared with low-grade recycled aggregates", Constr. Build. Mater., 36(11), 881-889.   DOI
12 Ma, H., Xue, J.Y. and Zhang, X.C. (2013), "Seismic performance of steel-reinforced recycled concrete columns under low cyclic load", Constr. Build. Mater., 48(11), 229-237.   DOI
13 Kumar, R. (2017), "Influence of recycled coarse aggregate derived from construction and demolition waste (CDW) on abrasion resistance of pavement concrete", Constr. Build. Mater., 142(7), 248-255.   DOI
14 Leiva, C., Guzman, J.S. and Marrero, M. (2013), "Recycled blocks with improved sound and fire insulation containing construction and demolition waste", Waste Manage, 33(3), 663-671.   DOI
15 Liu, Y., Guo, Z.X. and Huang, Q.X. (2010), "Experimental study of damage model for SRC columns", J. Wuhan Univ. Technol., 32(9), 203-207.
16 Manzi, S., Mazzotti, C. and Bignozzi, M.C. (2013), "Short and long-term behavior of structural concrete with recycled concrete aggregate", Cement Concrete Compos., 37(3), 312-318.   DOI
17 Mas, B., Cladera, A., Olmo, T.D. and Pitarch, F. (2012), "Influence of the amount of mixed recycled aggregates on the properties of concrete for non-structural use", Constr. Build. Mater., 27(1), 612-622.   DOI
18 Matar, P. and Dalati, R.E. (2011), "Strength of masonry blocks made with recycled concrete aggregates", Phys. Procedia, 21, 180-186.   DOI
19 Park, Y.J. and Ang, H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., ASCE, 111(4), 722-739.   DOI
20 Meyer, I.F., Wratzig, W.B. and Stangenberg, F. (1988), "Damage prediction in reinforced concrete frames under seismic action", Eur. Earthq. Eng., 2(3), 9-15.
21 Promis, G. and Ferrier, E. (2012), "Performance indices to assess the efficiency of external FRP retrofitting of reinforced concrete short columns for seismic strengthening", Constr. Build. Mater., 26(1), 32-40.   DOI
22 Song, L.L. and Guo, T. (2017), "Probabilistic seismic performance assessment of self-centering prestressed concrete frames with web friction devices", Earthq. Struct., 12(1), 109-118.   DOI
23 Promis, G., Ferrier, E. and Hamelin, P. (2009), "Effect of external FRP retrofitting on reinforced concrete short columns for seismic strengthening", Compos. Struct., 88(3), 367-379.   DOI
24 Radonjanin, V., Malesev, M. and Marinkovic, S. (2013), "Green recycled aggregate concrete", Constr. Build. Mater., 47(10), 1503-1511.   DOI
25 Silva, R.V., Brito, J.D. and Evangelista, L. (2016), "Design of reinforced recycled aggregate concrete elements in conformity with Eurocode 2", Constr. Build. Mater., 105(2), 144-156.   DOI
26 Stephens, J.E. and Yao, J.T.P. (1987), "Damage assessment using response measurements", Struct. Eng., 113(4), 787-801.   DOI
27 Thomas, C., Setien, J. and Polanco, J.A. (2013), "Durability of recycled aggregate concrete", Constr. Build. Mater., 40(3), 1054-1065.   DOI
28 Wagih, A.M., El-Karmoty, H.Z. and Ebid, M. (2013), "Recycled construction and demolition concrete waste as aggregate for structural concrete", HBRC J., 9(3), 193-200.   DOI
29 Xue, J.Y., Bao, Y.Z. and Ren, R. (2014), "Experimental study on seismic behavior of steel reinforced concrete frame joints under low cyclic reversed loading", J. Civil Eng., 47(10), 1-8.
30 Xiao, J.Z., Li, W.G., Fan, Y.H. and Huang, X. (2012), "An overview of study on recycled aggregate concrete in China (1996-2011)", Constr. Build. Mater., 31(6), 364-83.   DOI
31 Yue, J.G., Qian, J. and Beskos, D.E. (2016), "A generalized multilevel seismic damage model for RC framed structures", Soil Dyn. Earthq. Eng., 80(1), 25-39.   DOI