• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.100-105
• /
• 2016

We have designed a three-channel output multiplexer (OMUX) using a band-pass filter and an ultra-wideband (UWB) antenna. The proposed band-pass filter is composed of an inner rectangular loop, an outer open stub, and a defected ground structure. The outer open stub can be used to control the pass band, and the inner rectangular loop can improve the insertion loss characteristics of the band-pass filter. The proposed band-pass filter, UWB antenna, and OMUX are fabricated and measured. The designed OMUX can cover the band group 1 (3,168-4,752 MHz) of WiX system. The measured radiation patterns are close to those of a conventional dipole antenna and the measured antenna gain varies from 1.8 dBi to 3 dBi over the operating frequency range.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.647-656
• /
• 1992

The purpose of this study was to evaluate the elastic memory process in cold worked stainless steel wire and the effect of heat treatment on it. 0.018 inch round and $0.019\times0.025$ inch rectangular wire (ORMCO stainless wire) were used in this study. Each wire type had 4 groups: non-heat treatment group, furnace heat treatment group, electric current heat treatment group, and bending after heat treatment group. Each group was consisted of 10 specimens. With the Jig, each wire was bent into v-shape uniformly, and width of two free ends of each v-shaped wire was measured by caliper (to the point of 0.1 mm correctly) at time interval of offjig, after heat treatment, 1, 2, 3, 4 hours, 1, 2, 3, 4, 5, 6 days, 1, 2, 3, 4 weeks after. The results were as follows: 1. In non-heat treatment group and bending after heat treatment group, elastic memory process was occured $60\%$ within 1 hour, and more than $90\%$ within 1 week. 2. In furnace and electric current heat treatment group, almost all elastic memory process was occured during teat treatment, and then specimen was stabilized dimensionally. 3. Magnitude of deformation by elastic memory was greater in heat treatment group than non heat treatment group and bending after heat treatment group. 4. There was no remarkable difference in deformation pattern between 0.018 inch round wire and $0.019\times0.025$ inch rectangular wire.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.88-102
• /
• 1991

In this study, thermophysical properties of the ceramic dielectrics such as BaOTiO$_{2}$, SrOTiO$_{2}$, MgOTiO$_{2}$, were measured by a single rectangular pulse heating method. The values of thermal diffusivities, specific heats, and thermal conductivities were measured as a function of temperature range from room temperature to 1300k. The measured thermal properties of one group of ceramic material were compared with those of other group and discussed in detail in connection with the chemical composition. Thus, some criteria for thermal design with the electric-electronic ceramic material were proposed.

• Transactions of Materials Processing
• /
• v.24 no.6
• /
• pp.425-430
• /
• 2015

In the current paper, the effects of initial slug design on the earring of an Al rectangular battery case manufactured by impact extrusion were studied. During impact extrusion, non-uniform metal flow between the long and the short sides of the battery case leads to earring, which is subsequently trimmed. Process parameters such as friction, aspect ratio of the battery case, the die shape and the forming temperature tend to induce earring because they cause greater non-uniform metal flow. Large aspect ratio of the battery case and high friction between slug and die can greatly affect the earring of a rectangular battery case. To make a rectangular battery case without earring, it is necessary to control metal flow uniformly during impact extrusion. One of the ways to reduce the earring is to control the metal flow of slug at the initial upsetting stage. To analyze the effects of the initial slug design on earring, FE analysis was conducted using DEFORM 3D. Two types of initial slug designs were evaluated where volume was removed along either the width or thickness directions. The results show that the initial slug design can be effective in adjusting the uniformity of metal flow.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.88-88
• /
• 2009

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.2
• /
• pp.208-216
• /
• 2019

Objective: The aim of this study is to control residual chemicals or by-products generated in chambers during preventive maintenance (PM) in the semiconductor manufacturing industry. We designed local exhaust ventilation using computational fluid dynamics (CFD). Methods: The air flow characteristics and capture efficiency between rectangular and slot hoods were compared numerically. The software Fluent 18.1 was used to estimate uniform velocity distribution and capture efficiency for contaminants. A metal from group 15 in the periodic table was released at the bottom of the chamber to simulate emissions. Results: The slot hood had a higher capture efficiency than a rectangular hood under the same conditions because the slot hood provided uniform air flow and higher face velocity. Also, there was no rotating swirl in the plenum for slot, that is why slot had better efficiency than rectangular even though they had similar face velocity. With less than 10 slots, the capture efficiencies for contaminants were nearly 95%. The optimum conditions for a hood to achieve high efficiency was 8 to 10 slots and a face velocity over 1 m/s. Conclusions: Well-designed ventilation systems must consider both efficiency and convenience. For this study, a slot hood that had high capture efficiency and no work disturbance was designed. This will contribute to protection of the worker's health in a PM area and other areas as well. Also, this study confirms the possibility of the application CFD in the semiconductor fabrication industry.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.891-896
• /
• 2011

In this study, experiments were carried out to investigate the convective heat transfer characteristics of rectangular microchannels. The sample used in the experiments contained 20 rectangular microchannels in parallel. The channels had a hydraulic diameter of 700 ${\mu}m$. Distilled water was used as the working fluid. In the experiments, the Reynolds number ranged from 400 to 800, heat flux ranged from 35 to 85 kW/$m^2$, and the inlet fluid temperature was $20^{\circ}C$. As a result, the convective heat transfer coefficient increased upon increasing the Reynolds number and ranged from 4.6 to 6.4 kW/$m^2/^{\circ}C$ in the thermally fully developed region. Moreover, the higher the Reynolds number, the longer the thermal entry length in the rectangular microchannels. However, it was observed that a variable heat flux did not affect the thermal entry length. In conclusion, a correlation was proposed to indicate the heat transfer characteristics in a thermally fully developed region.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.499-508
• /
• 2004

The purpose of this research is to define body characteristics of middle-aged men at ages between 35 and 55 whose physical changes are very prominent, by comparing the measurement data collected from this age group. This research also classifies different body types, and provides basic data for designing slacks' original forms according to each body type. Based on factor analysis of the measured data, seven key factors are grouped. And five different body types are classified based on the cluster analysis using factor marks. Type 1 refers to those who are tall and standard. This body type is characterized by trapezoid body shape when looked from the front, and slim abdomen when looked from the side. Type 2 refers to short and a little fat body shapes, with trapezoid front and protruding hip and abdomen. Type 3 refers to tall and fat body shapes, with rectangular front, protruding abdomen, and slim hip. Type 4 refers to those who are of medium height and a little obese, with rectangular front and protruding abdomen and hip. Type 5 refers to short and obese body shapes, with rectangular front, slim abdomen, and protruding hip. 12 items are available to judge middle-aged men's low body types and the hit ratio is 90%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.922-929
• /
• 2007

In this paper, a rectangular loop array antenna for beam scanning is designed. A program using RWG MoM(Rao Wilton Glisson Method of Moment) is developed for SEP(Scan Element Pattern) theoretically. Simulation results obtained by using a commercial software tool, MWS are compared with the MoM results to confirm the validity of the program. Also these results are compared with the measured ones for the case of an $8{\times}5$ subarray. The fabricated $8{\times}5$ subarray showed a flat gain characteristic in the elevation scan range of ${\pm}45^{\circ}$ in the E-plane.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.225-234
• /
• 2018

In this paper, we consider a problem of partitioning a search area into smaller rectangular regions, so that multiple platforms can conduct search operations independently without requiring unnecessary coordination among themselves. The search area consists of cells where each cell has some prior information regarding the probability of target existence. The detection probability in particular cell is evaluated by multiplying the observation probability of the platform and the target existence probability in that cell. The total detection probability within the search area is defined as the cumulative detection probability for each cell. However, since this search area partitioning problem is NP-Hard, we decompose the problem into three sequential phases to solve this computationally intractable problem. Additionally, we discuss a special case of this problem, which can provide an optimal analytic solution. We also examine the performance of the proposed approach by comparing our results with the optimal analytic solution.