Figure 1. Schematic diagram of hood for PM process
Figure 2. Configuration of hood with the grid pattern
Figure 3. Distribution of velocity
Figure 4. Velocity vector and contour of rectangular hood
Figure 5. Velocity vector and contour of slot hood
Table 1. Conditions of numerical analysis
Table 2. Face velocity by location
Table 3. Face velocity and capture efficiency by slot number
References
- American Conference of Governmental Industrial Hygienists(ACGIH). Industrial Ventilation, A Manual of Recommended Practice, 27th ed. Lansing, MI: ACGIH, 2010
- Betta V, Cascetta F, Labruna P, Palombo A. A numerical approach for air velocity predictions in front of exhaust flanged slot openings. Build. Environ. 2004;39(1):9-18 DOI: 10.1016/j.buildenv.2003.07. 004
- Burgess WA. Recognition of health hazards in industry, 2nd ed. New York: John Wiley and Sons Inc.; 1995. p. 227-245
- Burton DJ. Industrial ventilation_A self study companion to the ACGIH ventilation manual. Utah: Carr Printing.; 1994
- Cao Z, Wang Y, Duan M, Zhu H. Study of the vortex principle for improving the efficiency of an exhaust ventilation system. Energy Build. 2017;142(1):39-48 DOI:10.1016/j.enbuild.2017.03.007
- Cesar PC, Achille C, Kuhn S, Ameloot R. 3D printing in chemical engineering and catalytic technology:structured catalysts, mixers and reactor. Chem Soc Rev. 2018;47(1):209-230 https://doi.org/10.1039/C7CS00631D
- Chen SC, Tsai CJ, Li SN, Shih HY. Dispersion of gas pollutant in a fan-filter-unit(FFU) cleanroom. Build Environ. 2007;42(5):1902-1912 DOI:10.1016/j.buildenv.2006.02.023
- Chien CL, Tsai CJ, Ku KW, Li SN. Ventilation control of air pollutant during preventive maintenance of a metal etcher in semiconductor industry. Aerosol Air Qual Res. 2007;7(4):469-488 DOI: 10.4209/aaqr.2007.01.0007
- Choi KM, An HC, Kim KS. Identifying the hazard characteristics of powder byproducts generated from semiconductor fabrication processes. J Occup Environ Hyg. 2015a; 12(2): 114-122 DOI: 10.1080/15459624. 2014.955178.
- Choi KM, Kim JH, Park JH, Kim KS, Bae GN (2015b) Exposure characteristics of nanoparticles as process by-products for the semiconductor manufacturing industry. J Occup Environ Hyg. 2015b;12(8):153-160 DOI: 10.1080/15459624.2015.1009983
- Choi KM. Airborne PM2.5 characteristics in semiconductor manufacturing facilities. AIMS Environ Sci. 2018; 5(3):216-228 DOI: 10.3934/environsci.2018.3. 216
- Dalla Valle JM. Exhaust hoods. 2th ed. New York: Industrial Press; 1952. pp.1-146
- Fletcher B. Centreline velocity characteristics of local exhaust ventilation hoods. Am Ind Hyg Assoc J. 1982;43(8):626-627 DOI: 10.1080/15298668291410305
- Goodfellow HD. Industrial ventilation design guidebook. San Diego: Academic Press; 2001
- Gu KW. Pollutants dispersion control during the maintenance of metal etching machine in semiconductor industry. Master's thesis, Taiwan Chiao Tung University, Taiwan. 2003
- Ha HC, Kim TH, Shim KJ. Applicability of computational fluid dynamics on industrial ventilation engineering. J Korean Soc Occup Environ Hyg. 1998;8(2):163-177
- Ha HC, Jung YJ, Kim TH. Estimation of ventilation rates for general gravity ventilator. J Korean Soc Occup Environ Hyg. 2002a;12(1):27-34
- Ha HC & Kim TH. Characteristics of ventilation efficiency for various gravity ventilators. J Korean Soc Occup Environ Hyg. 2002b;12(1):35-45
- Ha HC & Kim TH. Estimation of ventilation rates for general gravity ventilator with width and height. J Korean Soc Occup Environ Hyg. 2003;13(1):35-44
- Huang SH, Shih HY, Li SN, Chen SC, Tsai CJ. Spatial and temporal distributions of a gaseous pollutant during simulated preventive maintenance and pipe leaking events in a working cleanroom. IEEE Trans Semicond Manuf. 2009;22(3):391-398 https://doi.org/10.1109/TSM.2009.2024874
- Iwasaki T & Ojima J. Design of a circular slot hood for a local exhaust system and its application to a mixing process for fine particles and organic solvents. Ind Health. 1997;35(1):135-142 https://doi.org/10.2486/indhealth.35.135
- Joung JM, Kim JH, Yoo YT. A characteristics of a secondary flow in a corner section of square duct. Korean Soc Mech Eng. 2000;36(16):753-758
- Jung YJ, Kim HT, Ha CH, Kim TH. Prediction of worker's exposure in a uniform free stream. J Korean Soc Occup Environ Hyg. 2000;10(2):140-149
- Jung YJ, Ha HC, Kim TH, Yoo GJ. Prediction of airflow and temperature field in a room with convective heat source. J Korean Soc Occup Environ Hyg. 2001;11(1):78-84
- Kavli HP, Oquz E, Tezdogan T. A comparative study on the design of an environmentally friendly RoPax ferry using CFD. Ocean Eng. 2017;137(1):22-37 DOI:10.1016/j.oceaneng.2017.03.043
- Kim TH, Ha HC, Park SC, Kim JC. Ventilation strategy for final test line in automobile assembly factory. J Korean Soc Occup Environ Hyg. 2004;14(1):1-12
- Kulmala I. Experimental validation of potential and turbulent flow models for a two-dimensional jet enhanced exhaust hood. Am Ind Hyg Assoc J. 2000;61(2):183-191 https://doi.org/10.1202/0002-8894(2000)061<0183:EVOPAT>2.0.CO;2
- Lee SW, Kim TH, Kim JM, Kim JC. A valuation and improvement of industrial ventilation system of printing process in synthetic leather factory using dimethylformamide. J Korean Soc Occup Environ Hyg. 2009;19(2):113-126
- Li J & Zhou YF. Occupational hazards control of hazardous substances in clean room of semiconductor manufacturing plant using CFD analysis. Toxicol Ind Health. 2015;31(2):123-139 DOI: 10.1177/0748233712469996
- Li J, Fei ZY, Xu YF, Wang J. Fan BF et al. Study on the optimization of the deposition rate of planetary GAN-MOCVD films based on CFD simulation and the corresponding surface model. R Soc Open Sci. 2018;5:1-17 DOI: 10.1098/rsos.171757
- Lim JH & Kim TH. Improvement of hot work environment in the curing processes of a tire manufacturing company. J Korean Soc Occup Environ Hyg. 2011;21(1):1-10
- Lim MT, Jeong KB, Choi YC and Yoo YT. A study on the corner flow characteristics in the entrance region of a square duct. J Archit Inst Korea Struct Constr. 1997;13(4):285-293
- Madsen U. Breum No, Nielsen PV. Local exhaust ventilation_a numerical and experimental study of capture efficiency. Build Environ. 1994;29(3):319-323 DOI: 10.1016/0360-1323(94) 90029-9
- Park SH, Shin JA, Park HH, Yi KY, Chung KW et al. Exposure to volatile organic compounds and possibility of exposure to by-product volatile organic compounds in photolithography processes in semiconductor manufacturing factories. Saf Health Work. 2011;2(3):210-217 DOI: 10.5491/SHAW.2011.2.3.210
- Rabehi R, Chaker A, Aouachria Z, Tingzhen M. CFD analysis on the performance of a solar chimney power plant system: Case study in Algeria. Int J Green Energy. 2017;14(12):971-982 DOI: 10.1080/1543 5075.2017.1339043
- Robert WL. The history of multiphase science and computational fluid dynamics. Switzerland: Springer; 2017. p.185-187 DOI: 10.1007/978-3-319-66502-3
- Shih HY, Huang SH, Li SN, Chen SC, Tsai CJ. Simulation and testing of pollutant dispersion during preventive maintenance in a cleanroom. Build Environ. 2009; 44(12):2319-2326 DOI: 10.1016/j.buildenv.2009.03.018
- Shih YC, Yang AS, Lu CW. Using air curtain to control pollutant spreading for emergency management in a cleanroom. Build Environ. 2011;46(5):1104-1114 DOI: 10.1016/j.buildenv.2010.11.011
- Statista, Semiconductor sales revenue worldwide from 1987 to 2018, April. 20, 2018. Available from URL: https://www.statista.com/statistics/266973/global-semiconductor-sales-since-1988/
- Yoo SJ, Kang JW, Yang JH. A study on evaluation of ventilation efficiency from ventilation system and volume in the small printing facilities using CFD. J Archit Inst Korea Plan Des. 2013;29(6):263-270 DOI:10.3130/jaabe.15.119
- Weerasuriya AU, Hu ZZ, Zhang XL, Tse KT, Li S, et al. New inflow boundary conditions for modeling twisted wind profiles in CFD simulation for evaluating the pedestrain-level wind field near an isolated building. Build Environ. 2018;132(15): 303-318 DOI: 10.1016/j.buildenv.2018.01.047