• Advances in nano research
• /
• v.15 no.1
• /
• pp.67-74
• /
• 2023

The combination of physical activities and individual skills in sports creates an entertaining and competitive environment governed by a set of rules. In today's world, sports attract significant attention and are approached differently by various groups. Inevitably, injuries occur in sports, significantly impacting an athlete's performance and ability to participate in exercises and competitions. Addressing this issue, one of the crucial measures involves restoring the athlete's ability to engage in sports and compete. Sports rehabilitation serves as a treatment to mitigate the effects of injuries, and when combined with surgery, it can expedite the recovery process. Therefore, the primary objective of this study is to utilize a biocompatible technology for synthesizing zinc oxide (ZnO) nanoparticles in sports rehabilitation, ensuring minimal harm to the environment.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.513-519
• /
• 2004

This paper presents a low power 16-bit adiabatic reduced instruction set computer (RISC) microprocessor with efficient charge recovery logic (ECRL) registers. The processor consists of registers, a control block, a register file, a program counter, and an arithmetic and logical unit (ALU). Adiabatic circuits based on ECRL are designed using a $0.35{\mu}m$ CMOS technology. An adiabatic latch based on ECRL is proposed for signal interfaces for the first time, and an efficient four-phase supply clock generator is designed to provide power for the adiabatic processor. A static CMOS processor with the same architecture is designed to compare the energy consumption of adiabatic and non-adiabatic microprocessors. Simulation results show that the power consumption of the adiabatic microprocessor is about 1/3 compared to that of the static CMOS microprocessor.

• Journal of the Korean housing association
• /
• v.17 no.2
• /
• pp.19-26
• /
• 2006

Building would be deteriorated with time elapse, influenced by its geographic situation, climate and other environmental conditions. In addition, the systematic maintenance could be provided to keep the resident a recent living condition. The existing breakdown maintenance will be changed into the preventive maintenance. The preventive maintenance is required to get the repair time, the repair scope and frequency. In this paper, it aimed at providing the repair time range over the building components, utilizing the relation between the determination curve and the performance recovery through repair. Results of this study are as follows : First, the forecast of the repair time over the building components could be calculated and equalized with the deterioration and performance degree. Second, the repair time range of building components would be provided into five categories and 3rd repair time. Results of this study will set up the long-term repair plan of building, and finally keep an housing condition comfortable.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.705-708
• /
• 2011

Ejector system can induce the secondary flow or affect the secondary chamber pressure by both shear stress and pressure drop which are generated in the primary jet boundary. Ejectors are widely used in a range of applications such as a turbine-based combined-cycle propulsion system and a high altitude test facility for rocket engine, pressure recovery system, desalination plant and ejector ramjet etc. The primary interest of this study is to set up an design procedure on the configuration and operating condition of multi-ejector for the various high altitude simulation.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.238-241
• /
• 2007

The forest seemed apparently to die on the forest fire area in Honjima, Kagawa Prefecture, Japan. However, the soil that became growing basic of vegetation hardly suffered damage, and the forest recovery was started by the sprout, etc. in the next year. For restoration of forest fire area, the fascine mulching works and log barrier works using the damaged trees were used for the upper-stream, and chack dam and erosion control dam were set up in the downstream. Also, the forest restoration was tried with the plants and the microorganism that inhabit in Honjima to preserve a peculiar forest ecosystem.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.417-420
• /
• 2006

본 논문에서는 새로 개발된 전력품질 보상장치의 성능을 실험실에서 효과적으로 분석하기 위해 필요한 새로운 부하모의장치를 제안하였다. 제안하는 부하모의장치는 2대의 PWM 인버터가 직류 단을 공유한 구조로 선형과 비선형부하를 단일기기로 시험 가능하도록 설계되어 있다. 그리고 전력품질보상기의 하나인 능동전력필터와 연계시험을 수행하였다. 본 논문에서는 제안하는 부하모의장치와 능동전력필터의 연계 특성을 분석할 목적으로 PSCAD/EMTDC 소프트웨어를 이용하여 시뮬레이션 실시하였고 또한 실적용시 타당성을 검증할 목적으로 20kVA 용량의 부하모의장치와 10kVA용량의 능동전력필터를 제작하여 실험을 실시하였다. 시뮬레이션과 하드웨어 실험결과 제안하는 부하모의장치는 능동전력필터의 다양한 보상 능력 검증에 충분히 활용가능함을 알 수 있었다.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.10 no.2
• /
• pp.37-49
• /
• 2015

Objectives : The purpose of this study is to show the effectiveness of Chuna Cranio-Sacral Therapy for remaining pain and muscle strength decrease after herniated intervertebral disc surgery. Methods : Two patients with Failed Back Surgery Syndrome(FBSS) were hospitalized and treated by Korean medical treatments with Chuna Cranio-Sacral Therapy. The Range of Motion(ROM) of the lumbar spine and Manual Muscle Test(MMT) were adopted to measure the resulting motor recovery after treatment. And the Numerical Rating Scale(NRS) was adopted to measure changes of pain level. Two patients both had Chuna Cranio-Sacral Therapy category III disorder with short right leg. We applied category III blocking technique everyday for 20 minutes with Korean medical treatments. Results : In both cases, the range of motions were improved and the pain level decreased. And in case 1, muscle strength also showed improvements. Conclusions : We suggest Chuna Cranio-Sacral Therapy is effective for pain decrease and motor recovery of FBSS patients. Further studies are needed to set up an Korean medical protocol for FBSS.

• Journal of Korean Neurosurgical Society
• /
• v.55 no.1
• /
• pp.18-25
• /
• 2014

Objective : This study explored the relationships among demographic (DVs) and clinical variables (CVs), neurocognitive (NOs) and functional outcome (FO) that could be used as prognostic factors for old aged patients with traumatic brain injury (TBI) undergoing or appointed disability evaluation (DE) after treatment. Methods : A total of 162 subjects with TBI above the age of 55 years undergoing DE or appointed to do so after treatments were selected. The patients were divided into two subgroups according to age : a junior elderly group 55 to 64 years old and a senior elderly group over the age of 65. NOs and FO were evaluated using the Seoul Neuropsychological Screening Battery and Clinical Dementia Rating scale. Results : Gender, age, and education level were shown to significantly impact the recovery of NOs after TBI. Other DVs and CVs such as area of residency, occupation, type of injury, or loss of consciousness were not found to significantly affect the recovery of NOs after TBI. Analysis of the relationships among DVs, CVs and NOs demonstrated that gender, age, and education level contributed to the variance of NOs. In FO, loss of consciousness (LOC) was included to prognostic factor. Conclusion : Gender, age and education level significantly influence the NOs of elderly patients with TBI. LOC may also serve as a meaningful prognostic factor in FO. Unlike younger adult patients with TBI, old aged patients with TBI did not show global faking-bad or malingering attitudes to DE for compensation, but assume that they could faking their performance in a test set available visual feedback.

• Culinary science and hospitality research
• /
• v.16 no.2
• /
• pp.15-30
• /
• 2010

This study investigates the effect of seriousness and controllability of service failure on perceived fairness, reliability, satisfaction and loyalty of customers. The result of the study is as follows. First, it was expected that a control-attribute and a seriousness-attribute would have an negative(-) impact on perceived fairness-attribute; however, the result showed that both did not have an negative impact on it. Next, a fairness-attribute of a procedure had a significant effect on trust, and a fairness-attribute of interaction and a fairness-attribute of distribution had a significant effect on trust and satisfaction. Lastly, trust had a significant effect on satisfaction while satisfaction had a significant effect on loyalty. Based of the result of this study, food-service enterprises need to perform a fast process of a recovery to overcome service failure rather than confirming a control-attribute and a seriousness-attribute of service failure. Also, they should set up a process of the recovery in the order of trust, satisfaction, and loyalty and check if this process is promptly carried out.

• The International Journal of Costume Culture
• /
• v.2 no.2
• /
• pp.80-96
• /
• 1999

This research focused on pattern adjustments of the stable knit garment for women. Fourteen different types of the knitted fabrics by 12 gauge, computerized flat bed machines were cut in as one half of the torso front, one half of the torso back, and one side of the sleeves for each of them. Guidelines such as the center front, the center back, the armhole, the bust-line, the waistline, the hip-line the hemline were basted on the torso patterns in the knitted fabrics. Also the grain-line, the elbow-line, and the hemline were basted on the one side of the sleeves in the same as above knitted fabrics. The torso patterns in the knitted fabrics were exhibited on the dress-forms on top of the torso patterns in Muslin, which also have the same guidelines drawn on. The distances between the guidelines on Muslin and those on the knitted fabrics for each set of the sample fabrics were measured every three days for two weeks. The fabric properties of the fourteen knitted fabrics such as fiber contents, stitch density both in the wale and course directions, weight, thickness, stretch & recovery, residual shrinkage, relaxation and drapability were laboratory tested for how these were related to finished appearance of 12 gauge, computerized flat knit garments and also in order to prove the fourteen knitted fabrics fall to a category of such as the stable knit. The results from the investigation revealed that six fabric properties such as stitch density, thickness, stretch recovery, residual shrinkage and relaxation were not so much significant factors as weight and drapability. In conclusion, fabric weight, and drapability of the fabric resulting from fiber contents were the cause of final appearance distortion of garment. When adapting patterns for stabilized, 12 gauge, computerized flat knitted fabrics, the fiber contents of the fabrics should be taken into consideration to reduce the production cost and produce better-fit garments.