• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제9권12호
• /
• pp.321-332
• /
• 2020

탈중앙화 접근법은 기존 시스템의 데이터 프라이버시 결함을 보완하기 위해 산·학계에서 폭넓게 연구되고 있다. 블록체인은 기록된 데이터는 위조할 수 없으며 합의를 기반으로 의사결정을 이루고 전반적인 거래의 비용은 저렴한 특징을 가지고 있다. 연합학습은 데이터 집합을 공개적으로 노출하지 않고 다수의 장치를 집합적으로 사용 함으로서 딥러닝 모델을 개선할 수 있게 한다. 모델 구축을 위해서는 자원을 사용하도록 참여자들의 동기 부여를 위한 적절하고 참여 비율에 합당한 인센티브 제도가 필수적이다. 그러나 중앙집중화된 인센티브 메커니즘은 중간 계층에 의존하고 여전히 병목현상을 유발하기 때문에 연합학습에 적용하기에는 어려움이 있다. 따라서, 우리는 이더리움 스마트컨트랙트를 활용하여 연합학습 어플리케이션을 위한 인센티브 모델을 제안한다. 구현 결과는 설계 목표를 충족하였고, 마지막 절에서 연합학습에서 프라이버시 및 데이터 유출과 관련된 민감 데이터에 대한 본 구현을 실행할 때 발생할 수 있는 사항들을 설명한다.

• 한국BIM학회 논문집
• /
• 제10권4호
• /
• pp.50-59
• /
• 2020

Recently, the government has actively promoted the introduction of BIM at the national level to improve the efficiency and productivity of the construction industry, and private interest in the application of BIM has also increased. However, despite the large amount of references and information, not much research has been done in quantitative ways to accurately measure the performance of BIM projects. The purpose of this study is to review performance measurement cases using ROI, investment effect analysis, and queue model analysis using domestic and overseas BIM guideline research and to present standard templates that can quantitatively measure BIM performance records according to domestic conditions based on this. Performance measurement trends and cases according to the application of BIM were analyzed, and nine quantification elements were derived from this, and based on this, a performance measurement data collection template at the BIM life cycle stage was prepared. Detailed items and contents were prepared for the nine quantification elements, and the final template consisted of a total of 43 questions, divided into the entire stage (15), the beginning (8), the middle (8), and the latter (12) areas. It is expected that by using the standard template of railway BIM performance records developed in this study, the BIM design stage will be diagnosed and the deficiencies will be supplemented, which will be the basic data for measuring actual quantitative performance in all life cycle performance of future BIM projects.

• 한국정보통신학회논문지
• /
• 제25권3호
• /
• pp.433-439
• /
• 2021

본 논문에서는 사물인터넷을 이용하여 조선소의 작업장 단위로 센서네트워크를 구축하는 방안을 제시한다. 여기서는 조선소에서 가장 흔한 용접 작업장에서 조선블록을 통신매체로 활용하여 작업자의 위치, 용접 진행률, 작업 시간 등의 정보를 LoRa와 전력선통신을 이용하여 서버로 전송한다. 이와 같은 데이터통신을 위하여 유도성 커플러와 복합통신용 모뎀을 제작하여 와이어피더와 핀지그에 설치하여 센서네트워크를 구축하였다. 시험 결과, 제시된 시스템은 약 98% 이상의 데이터 전송 성공률과 작업자 위치 인식 성공률을 가지는 것으로 나타났다. 또한, 현장에서 발생된 작업 데이터는 실시간 기록과 디스플레이가 가능함을 공정관리시스템 플랫폼을 통하여 확인하였다. 제시된 시스템은 미래형 스마트 조선소 구축을 통한 우리나라 조선산업의 경쟁력 강화를 위한 단초가 될 것으로 사료된다.

• 복식문화연구
• /
• 제30권2호
• /
• pp.281-296
• /
• 2022

This study is designed to compensate for the lack of children's clothing relics from the early 18th century and to reproduce young upper-class girls' costume as hanbokcontent. The shapes and materials of costumes are based on the record of 『Sukjong-silrok』 in 1701 and the characteristics of adult ladie's costume relics in this period, but reproduced as miniatures of these relics as like Joseon children's clothing of another period. The reproduced costumes are formal wear for 3~4 year-old girls, consisting of yeoui [女衣], long unlined skirts, and lined skirts. Sizes were set at a height ratio of approximately 155:95. Yeoui is sam-hoejang-jeogori using pine pollen-colored damask with a grape-squirrel pattern and a purple damask with flower-treasure pattern. The full length of yeoui is 24.5cm. It has a square-dangko outer collar with square inner collar. The long unlined skirt is a six-width overskirt that is 82cm long, made with lotus patterned sa. The lined skirt is a five-width skirt that is 61.3cm made with flower-treasure patterned red damask and ju. Several long pleats on both sides of these two skirts have been omitted. The result provides meaningful content for children's clothing in the early 18^th century and will be used as costume for an educational trial performance.

• 한국의류산업학회지
• /
• 제24권1호
• /
• pp.156-163
• /
• 2022

Loss of leg muscle and muscle weakness, which are caused by aging, affect muscle function and sense of balance. As a way of preventing seniors from falling, we developed the idea of wearing functional supporters based on graduated compression technique and in the form of a taping supporter. Their impact on power, sense of balance, overcoming fatigue, and subjective wearing sensation was investigated. The following results were obtained. After wearing functional compression supporters, body temperature increased from 24.5 ± 0.5℃ to 26.3 ± 0.6℃. Calf size, which assesses the level of edema, decreased from 26.1 ± 1.8cm to 25.7 ± 1.8cm. The result of dynamic balance test, which helps estimate the fall prevention effect, increased from 6.4 ± 0.9sec to 7.1 ± 0.6sec. Lactate level, which indicates the level of fatigue, decreased from 8.1 ± 0.6mmol/L to 7.3 ± 0.8mmol/L. Standing long jump record, which assesses power, increased from 110.1 ± 3.1cm to 112.0 ± 2.8cm. Standing on one leg with eyes closed, which assesses sense of balance, increased from 4.2 ± 1.1sec to 6.5 ± 0.8sec. Ankle angle, which assesses joint stability, increased from 75.3 ± 4.0° to 80.1 ± 1.7°. In metabolism and physical performance testing, which assesses keep, the score increased from 26.3 ± 1.7 to 28.8 ± 1.2. Muscle supporting score, which assesses joint stability, increased from 7.3 ± 0.6 to 7.8 ± 0.4. In the category of body type, which assesses wearing sensation and body shaping function, the score increased from 5.7 ± 1.4 to 6.4 ± 1.2

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.484-491
• /
• 2022

A paradigm shift in teaching modular construction in higher education and K-12 is proposed as a means to increase the future adoption of the modular construction technique. To this effect, a new education module is presented to STEM educators. This education module is based on LEGOs and directed towards educators in the architecture, engineering, and construction (AEC) industry. The main objectives of the education module are to increase interest and knowledge of modular construction, acknowledge the benefits of using 3D design with 4D scheduling, and create a simulating hands-on educational opportunity. The education module is designed to allow participants to experience a hands-on simulation of modular construction and stick-built construction through building a LEGO project. Participants are challenged to find the advantages and disadvantages in both construction systems first-hand and record their findings. Results are presented from the preliminary testing of this education model on a group of construction management students at the University of Nevada, Las Vegas. Overall, the survey results showed that the LEGO education module was successful at achieving the project's three main objectives: 1) increasing the participants' interest and knowledge of modular construction through an interactive project; 2) increasing the participants' understanding of the benefits of 3D design with 4D scheduling over the use of 2D drawings; and 3) creating a simulating hands-on educational opportunity to help participants compare modular construction to stick-built construction. In the end, this proposed a new LEGO education module addressing the problems identified from this study with more participants.

• 임상간호연구
• /
• 제15권1호
• /
• pp.133-147
• /
• 2009

Purpose: This study was conducted to construct evidence based clinical guidelines and to develop nursing process based performance measures for prevention and management of pressure ulcers, falls and pain. Method: Clinical guidelines were drafted through a comprehensive review of relevant literature, national guidelines and hospital protocols. The proposed guidelines were reviewed by a panel of experts and 90 hospital nurses, and refined on the basis of their suggestions. Nursing process based performance measures were developed based on the clinical guidelines and content validity was examined by surveys from 90 hospital nurses. Results: All items, except timetable for position change and pressure ulcer nursing record, in the guidelines for prevention and management of pressure ulcer were appropriate. Most items, except fall risk assessment tools, were appropriate for the guidelines of fall prevention. All other items, except the purpose of pain management, were appropriate for the guidelines of pain management. Performance measures developed in this study were acceptable as a tool to evaluate quality of nursing care. Conclusion: Nursing process based performance measures provide important indicators to monitor whether necessary nursing care is implemented and can be used as the primary resources to improve quality of nursing services.

• 한국건설관리학회논문집
• /
• 제24권3호
• /
• pp.3-11
• /
• 2023

건설업은 노동집약적 산업으로, 성능과 생산성의 변동성이 매우 높다. 따라서 계약자의 실제 성과를 파악하기 위해 기준생산성을 정량적이고 객관적으로 산출하여야 한다. 하지만, 기존 문헌에서 주로 제시된 기준생산성 산출 방법은 주관성이 내재된 기준을 사용하여 기준생산성을 산출한다는 한계가 있다. 또한, 데이터 수집에 과도한 비용과 시간이 투입되는 기존의 'Five-minute Rating'과 같은 데이터 수집 방식으로는 공사 현장에서 실적 물량, 실적 자원과 저해 요인이 포함된 Detailed Data를 수집하기 어렵다. 이에 본 연구에서는 Unimpacted Productivity BP를 산출할 때 활용되는 Detailed Data를 체계적인 형식으로 기록할 수 있는 작업 체크시트 와 과도한 비용과 시간을 들이지 않고 데이터를 수집하고 활용할 수 있는 프로세스를 제시하였다. 또한 기존 기준생산성 산출 방법의 객관성과 신뢰도 문제를 해결하기 위해 비교 분석하여. Detailed Data를 활용한 보다 더 객관적이고 정확한 Unimpacted Productivity BP를 활용한 기준생산성 산출을 제안한다.

• 운동영양학회지
• /
• 제13권2호
• /
• pp.123-130
• /
• 2009

The purpose of this study was to provide the basic information on nutritional condition for improving performance of the national junior rowing team players(male n=17, female n=14). To attain this purpose, their body composition and energy intake situations were investigated during their three-week winter training camp. Measurement of body composition measured by the interval, and two days, and dietary intake in this study to investigate the type and amount of food, the researchers measured directly, and then refer to the record subjects to investigate the dietary intake and the adoption of a Weighing Method. The result is as follows. During training, body composition due to the high intensity training to maintain a properly balanced diet is the consumption of energy, weight and body composition has a positive influence. The male players' average energy intake is 5,951.6 kcal(72.6 kcal/kgBW, 150%), the rate of the three main nutrients, carbohydrate, fat, protein, is 72.6 : 8.7 : 18.7 respectively. For the female, the average energy intake is 3,685.6 kcal(51.8 kcal/kgBW, 121%), and the rate of the three main nutrients is 76.3 : 8.5 : 15.2. Both of male and female were taken sufficient Vitamin, mineral and other nutrient according to %RI(recommended intake). Based on the results of a survey of elite athletes and nutrition management and the systematic introduction and review of the program in conjunction with a professional nutritionist would need, and can also be applied to expand the school to the scene, the reality of the program review and development of qualified need.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.450-453
• /
• 2015

The Construction Engineering Industry (CEI) is construction field based on professional knowledge, staff and information service, and is distinguished by construction activity. The contemporary CEI market has extended globally and diversified construction work classifications. International construction engineering companies now have an important economic and social effect. Over the last five years (2009 to 2013), the top-200 global engineering firms reported global revenue that grew from 54.4 billion to 71.5 billion, about 27% growth (ENR, 2014). Countries such as the U.S.A., Canada, those in Europe (Several developed countries, i.e., United Kingdom, Netherlands, France, Spain, France, Italy, and Spain), Australia, Japan, China, and Korea comprise the bulk of world construction engineering revenue. Although the construction engineering market continues to grow, much of the work is limited to Europe, mid-Asia, and Asia. Additionally, specific construction types are focused on building projects, industrial plants, and refining plants. As such, there are imbalances in the construction engineering market and some market saturation. Further, there is heavy competition and the construction engineering market may shrink in the future. This paper analyzed various factors affecting the construction engineering market, specifically looking at construction classifications and factors related to a global market. To accomplish this, we collected to data from Engineering News Record (ENR) and recast each variable. And we used nonparametric statistics because the number of cases were small, making it difficult to assume a case's population parameter. Then we tested with the Kruskal-Wallis test and drew results. The results indicate that concentration in particular construction types and extending global regional markets will be have a positive effect on the overall global construction engineering market..