• Current Optics and Photonics
• /
• v.5 no.5
• /
• pp.562-575
• /
• 2021

As a new type of spectrometer, that based on filters with different transmittance features attracts a lot of attention for its advantages such as small-size, low cost, and simple optical structure. It uses post-processing algorithms to achieve target spectrum reconstruction; therefore, the performance of the spectrometer is severely affected by noise. The influence of noise on the spectral reconstruction results is studied in this paper, and suggestions for solving the spectral reconstruction problem under noisy conditions are given. We first list different spectral reconstruction methods, and through simulations demonstrate that these methods show unsatisfactory performance under noisy conditions. Then we propose to apply the gradient projection for sparse reconstruction (GRSR) algorithm to the spectral reconstruction method. Simulation results show that the proposed method can significantly reduce the influence of noise on the spectral reconstruction process. Meanwhile, the accuracy of the spectral reconstruction results is dramatically improved. Therefore, the practicality of the filter-based spectrometer will be enhanced.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1749-1752
• /
• 2005

For online high accurate reconstruction of an object from an visual information, a linear reconstruction method for multiple images is popular. Basically this method needs many cameras or many different screen shots from different view points. This method, however, has the benefit of less calculation and is adequate for a real time application by comparing other popular method. In this paper, online reconstruction system using more than three cameras is treated. An evaluation method of cameras' position, and of the number is derived for the linear reconstruction method. To decrease errors that are caused from skew of lens, positional error between corresponding points is taken into consideration on the evaluation. The proposed evaluation method enables estimation of the adequate number of cameras and then of feasible view locations. Additionally, repeating search of epipolar lines enables estimation of the hidden point. Comparing with result of an average error analysis, it was confirmed that the proposed methods works effectively.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.9-16
• /
• 2001

This paper deals with the inverse reconstruction of sectional area in nonuniform ducts by using the acoustical measurement. There have been many theoretical and experimental studies on the duct area reconstruction. In this research, the method using the impulse response function and area reconstruction algorithm was employed because of its mathematical and experimental simplicity. Based on the study results on the drawback of conventional impulse excitation method, a new measurement method is proposed, that uses the random noise source and the discrete inverse Fourier transform. It is found that the reconstruction errors of the present method is smaller than the conventional method. A random error analysis is performed in order to investigate the causes of reconstruction error and to clarify the applicable data range for area reconstruction.

• Archives of Plastic Surgery
• /
• v.34 no.3
• /
• pp.336-341
• /
• 2007

Purpose: The most accepted method for the reanimation of a paralyzed face is the two-stage method that combines cross-face nerve grafting with free-muscle transfer. Although the results of reconstruction with this method are satisfactory, there is an excessive delay between the stages, which prolongs the period of rehabilitation. In order to overcome this drawback, a one- stage, neurovascular free-flap reconstruction method using free neurovascular muscle flaps is introduced. Methods: From 1994 to 2004, 35 patients with longstanding facial palsy were treated. Fifteen patients underwent the single-stage reconstruction with the latissimus dorsi muscle, and 20 patients underwent the two-stage reconstruction method with the gracilis muscle. We compared the long-term results of the two methods of reconstruction. The mean follow-up period was 28.7 months for one-stage reconstruction, and 35.2 months for the two-stage, respectively. Results: In the patient group of the single stage reconstruction, both mouth corner excursion and animation grade were markedly improved at the final postoperative visit. Moreover, the first muscle contraction occurred earlier in this group, than in the two-stage reconstruction group. However, four patients in the single stage group never achieved a first muscle contraction or mouth corner excursion. Conclusion: Facial palsy is a very challenging condition for cosmetic surgeons to deal with. Traditional methods for treatment of chronic facial palsy use a two-stage muscle flap which is time-consuming and burdensome to patients, many of whom are averse to waiting 8 to 12 months to complete the two stages. The one-stage reconstruction method described herein uses a latissimus dorsi free-flap and has demonstrated consistent positive outcomes in clinical assessments.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.714-718
• /
• 2009

3D reconstruction of a human face from an image sequence remains an important problem in computer vision. We propose a method, based on a factorization algorithm, that reconstructs a 3D face model from short image sequences exhibiting rotational motion. Factorization algorithms can recover structure and motion simultaneously from one image sequence, but they usually require that all feature points be well tracked. Under rotational motion, however, feature tracking often fails due to occlusion and frame out of features. Additionally, the paucity of images may make feature tracking more difficult or decrease reconstruction accuracy. The proposed 3D reconstruction approach can handle short image sequences exhibiting rotational motion wherein feature points are likely to be missing. We implement the proposal as a reconstruction method; it employs image sequence division and a feature tracking method that uses Active Appearance Models to avoid the failure of feature tracking. Experiments conducted on an image sequence of a human face demonstrate the effectiveness of the proposed method.

• Journal of information and communication convergence engineering
• /
• v.19 no.2
• /
• pp.102-107
• /
• 2021

In this paper, we propose a new three-dimensional (3D) photon-counting integral imaging reconstruction method using a merging reconstruction process and maximum likelihood estimation (MLE). The conventional 3D photon-counting reconstruction method extracts photons from elemental images using a Poisson random process and estimates the scene using statistical methods such as MLE. However, it can reduce the photon levels because of an average overlapping calculation. Thus, it may not visualize 3D objects in severely low light environments. In addition, it may not generate high-quality reconstructed 3D images when the number of elemental images is insufficient. To solve these problems, we propose a new 3D photon-counting merging reconstruction method using MLE. It can visualize 3D objects without photon-level loss through a proposed overlapping calculation during the reconstruction process. We confirmed the image quality of our proposed method by performing optical experiments.

• Journal of Yeungnam Medical Science
• /
• v.23 no.1
• /
• pp.1-9
• /
• 2006

Breast reconstruction provides dramatic improvement for patients with severe deformity. The reconstruction not only restores aesthetically acceptable breast for patients with mastectomy deformity but also recovers psychological trauma of 'losing feminity' after the cancer mastectomy. There are many options for breast reconstruction from simple prosthetic insertion to a flap operation using autologous abdominal tissue. The choice of operation method depends on the physical condition of the patient, smoking habits, and economic status. Among the many options, the method that uses the lower abdominal tissue is known as the TRAM (transverse rectus abdonimis myocutaneous) flap. Since the introduction of the TRAM flap in 1982 by Hartrampf, the art of breast reconstruction using lower abdominal tissue has been progressively refined to pedicle flap, muscle-sparinga TRAM flap, and recently there have been exciting and revolutionary changes associated with the adoption of the concept of perforator flap. This refined method of breast reconstruction utilizes lower abdominal tissue nourished by the deep inferior epigastric perforator (DIEP). With the DIEP free flap, almost all of the rectus muscle and anterior rectus sheath are preserved and the donor morbidity is minimized. Different from previous flap methods using lower abdominal tissue, DIEP free flap method preserves function of the rectus muscle completely. 1) Understanding the entire progression of breast reconstruction methods using lower abdominal tissue is necessary for plastic surgeons; the understanding of each step of the exciting progression and the review of the past history of the TRAM flap may provide insight for future development.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.527-530
• /
• 2003

In this paper, we implemented the voxel coloring method to reconstruct 3D object from synthetic input Images. Then compare the result between using standard voxel coloring and using coarse-to-fine method. We compared using different voxel space site to see the difference of time processing and the result of 3D object. Photorealistic 3D object reconstruction is a challenging problem in computer graphics. Vexel coloring considered the reconstruction problem as a color reconstruction problem, instead of shape reconstruction problem. This method works by discretizing scene space into yokels, then traversed and colored those in special order. Also there is an extension of voxel coloring method far decreasing the amount of processing time called coarse-to-fine method. This. method works using low resolution instead of high resolution as input and after processing finish, apply some kind of search strategy.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.3
• /
• pp.353-362
• /
• 1999

This paper presents a shape reconstruction method for automatic inspection of the solder joints on PCBs using X-ray. Shape reconstruction from X-ray radiographic image has been very important since X-ray equipment was used for improving the reliability of inspection result. For this purpose there have been lots of previous works using tomography, which reconstructs the correct shape, laminography or tomosynthesis, which are very fast algorithm. Latter two methods show outstanding performance in cross-sectional image reconstruction of lead type component, but they are also known to show some fatal limitations to some kinds of components such as BGA, because of shadow effect. Although conventional tomography does not have any shadow effect, the shape of PCB prohibits it from being applied to shape reconstruction of solder joints on PCB. This paper shows that tomography using Iterative Reconstruction Technique(IRT) can be applied to this difficult problem without any limitations. This makes conventional radiographic instrument used for shape reconstruction without shadow effect. This means that the new method makes cost down and shadow-free shape reconstruction. To verify the effectiveness of IRT, we develop three dimensional model of BGA solder ball, make projection model to obtain X-ray projection data. and perform a simulation study of shape reconstruction. To compare the performance of IRT with that of conventional laminography or tomosynthesis, reconstruction data are reorganized and error analysis between the original model are also performed.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.31-36
• /
• 2003

A field reconstruction scheme for a cell centered finite volume method on unstructured meshes is developed. Regardless of mesh quality, this method is exact within a machine accuracy if the solution is linear, which means it has full second order accuracy. It does not have any limitation on cell shape except convexity of the cells and recovers standard discretization stencils at structured orthogonal grids. Accuracy comparisons with other popular reconstruction schemes are performed on a simple example.