• 대한임베디드공학회논문지
• /
• 제2권1호
• /
• pp.66-75
• /
• 2007

In this paper, we have propose a preamble structure and synchronization/channel estimation method for UWB-MIMO which has 960Mbps transmit rate. The proposed structure is a compatible preamble structure for synchronization/channel estimation used by MIMO in MB-OFDM(Multi-Band OFDM) systems that are one of the standard systems of MBOA. The system is compatible with MB-OFDM using the proposed preamble structure. In this paper, we argue the problem in receiver part used by MIMO technique. And we simulate the proposed preamble for using synchronization/channel estimation. The simulation result shows the same performance compared with single receiver antenna.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.875-880
• /
• 2018

This paper proposes a novel combined compensation structure in the infrared receiver chip. For the infrared communication chip, the current-voltage (I-V) convert circuit is crucial and important. The circuit is composed by the transimpedance amplifier (TIA) and the combined compensation structures. The TIA converts the incited photons into photocurrent. In order to amplify the photocurrent and avoid the saturation, the TIA uses the combined compensation circuit. This novel compensation structure has the low frequency compensation and high frequency compensation circuit. The low frequency compensation circuit rejects the low frequency photocurrent in the ambient light preventing the saturation. The high frequency compensation circuit raises the high frequency input impedance preserving the sensitivity to the signal of interest. This circuit was implemented in a $0.6{\mu}m$ BiCMOS process. Simulation of the proposed circuit is carried out in the Cadence software, with the 3V power supply, it achieves a low frequency photocurrent rejection and the gain keeps 109dB ranging from 10nA to $300{\mu}A$. The test result fits the simulation and all the results exploit the validity of the circuit.

• 자원환경지질
• /
• 제31권1호
• /
• pp.21-29
• /
• 1998

원주 (KSRS), 인천 (IRIS), 그리고 포항 (PHN)에서 관측한 원격 지진 P파로부터 광대역 수신 함수(Receiver Function)를 이용하여 관측소 하부의 지각 속도 모델을 찾았다. 3개의 관측소에서 기록된 수신 함수 파형으로부터 모호 불연속면에서 전환된 Ps파형을 명확하게 관측할 수 있었다. 각 관측소에서 관측된 수신 함수들은 신호 대 잡음 비 (S/N ratio)를 향상시키기 위해 후방위각과 진앙 거리가 거의 같은 수신 함수들끼리 스태킹(Staking)하였다. 이와 같이 스태킹한 수신함수를 수신함수 역산법 (Receiver Function Inversion Method)을 이용하여 다음과 같은 결과를 얻었다. (1) 포항 관측소에는 후방위각 남동 (SE)과 북서 (NW)방향의 수신 함수 역산 결과 표층으로부터 4~5km에서 고속도층이 존재하며 10 km깊이부터 저속도층 (LVZ)이 존재하고 있다. 그리고 북서 (NW)방향의 원격 수신 함수 역산 결과 약 28km 깊이에 모호 불연속면이 존재하는 것을 찾았다. (2) 원주 관측소에서는 북동 (NE)방향의 원격 수신 함수 역산 결과 천부 지각 속도 구조 양상이 다소 복잡하고 3~4km깊이에 고속도대 (high-velocity zone, $V_p{\simeq}6.8km/sec$)가 존재하는 것으로 나타났다. 이 지역의 평균 지각 두께는 33km 이며, 30~33 km깊이에서 속도가 6.4 km/sec에서 7.9 km/sec로 급격히 변하는 지각-맨틀 경계가 존재하는 것을 알 수 있다. 따라서 Moho 불연속면의 깊이는 33km로 추정된다. (3) 북서 (NW)방향의 수신함수 분석결과 인천 관측소 하부의 지각 속도 모델의 특징으로는 P파의 속도는 표층부터 선형적으로 증가되고 또한 26~29 km 깊이에 P파 속도가 6.2 km/sec에서 7.9 km/sec로 속도가 급격히 변하고 있음에 비추어 Moho 불연속면은 심도 약 29km에 존재하는 것으로 나타났다.

• 한국음향학회지
• /
• 제29권5호
• /
• pp.303-313
• /
• 2010

본 논문에서는 25 kHz의 반송파와 5 kHz의 심볼율을 갖는 QPSK (Quadrature Phase Shift Keying) 통신시스템에서 수신된 신호를 100 kHz로 샘플링하여 전송데이터를 복원하는 수중통신용 수신기의 구조에 대하여 논한다. 또한, 천해역에서 제작한 센서를 이용하여 취득한 데이터를 2:1의 비율로 간축한 후 설계한 수신기의 입력으로 하여, 결합채널등화기 출력신호의 BER (Bit Error Rate) 을 최소화하는 결합채널등화기의 FF (Feed-Forward) 및 FB (Feed-Back) 필터 탭 수 및 RLS (Recursive Least-Square) 알고리듬의 망각인자 등의 설계 파라미터를 도출하였다. 취득 신호의 전송거리는 각각 1.4 km, 2.9 km, 4.7 km이다. 분석결과 BER을 최소화하기 위한 결합채널등화기의 FF 와 FB 탭 수는 전송거리에 따라 상이하나 망각인자는 0.997에서 최적 또는 최적에 가까운 성능을 보이는 것을 확인하였다. 그러므로, 수중음향통신 수신기 설계시 망각인자, ${\lambda}$,는 0.997로 고정하고, 전송거리에 따라 최적의 성능을 갖는 결합채널등화기의 FF 필터 탭 수와 FB 필터 탭수를 가변적으로 변경할 수 있는 구조를 갖는 수신기를 설계하는 것이 바람직하다는 결론을 얻을 수 있었다. 또한, 수신기 성능 분석을 통하여 본 논문에서 고려하는 시스템에서는 16탭 길이를 갖는 간단한 형태의 필터를 161탭 길이를 갖는 정합필터 대신에 수신기의 저역통과필터로 사용하더라도 성능의 열화가 적음을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제70권6호
• /
• pp.765-779
• /
• 2019

Most of the existing evaluation criteria of vibration serviceability rely on the peak acceleration of the structure rather than that of the people keeping their own body unmoved on the structure who is the real receiver of structural vibrations. In order to accurately assess the vibration serviceability, therefore, a full path assessment approach of vibration serviceability based on vibration source, path and receiver is not only tentatively proposed in this paper, taking the peak acceleration of receiver into account, but also introduce a probability procedure to provide more instructive information instead of a single value. In fact, semi-rigid supported on both sides of the structure is more consistent with the actual situation than simply supported or clamped due to the application of the prefabricated footbridge structures. So, the footbridge is regarded as a beam with semi-rigid supported on both sides in this paper. The differential quadrature-integral quadrature coupled method is not only to handle different type of boundary conditions, but also after being further modified via the introduction of an approximation procedure in this work, the time-varying system problem caused by human-structure interaction can be solved well. The analytical results of numerical simulations demonstrate that the modified differential quadrature-integral quadrature coupled method has higher reliability and accuracy compared with the mode superposition method. What's more, both of the two different passive control measures, the tuned mass damper and semi-rigid supported, have good performance for reducing vibrations. Most importantly, semi-rigid supported is easier to achieve the objective of reducing vibration compared with tuned mass damper in design stage of structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1216-1221
• /
• 2005

The GPS software receiver based on the SDR(Software Defined Radio) technology provides the ability to easily adopt other signal processing algorithms without changing or modifying the hardware of the GPS receiver. However, it is difficult to implement the GPS software receiver using a commercial processor because of heavy computation load for processing the GPS signals in real time. This paper proposes an efficient GPS signal processing scheme and correlator structure to reduce the computation load for processing the GPS signal in the GPS software receiver, which uses a patterned look-up table method to generate the correlation value between the GPS signals and the replica signals. In this paper, it is explained that the computation load of the proposed scheme is much smaller than that of the previous GPS signal processing scheme. Finally, the processing time of the proposed scheme is compared with that of the previous scheme, and the improvement is shown from the viewpoint of the computation load.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권6호
• /
• pp.286-295
• /
• 2006

This paper presents a design of a real-time software GPS receiver which runs on a PC. The software GPS receiver has advantages over conventional hardware based receivers in terms of flexibility and efficiency in application oriented system design and modification. In odor to reduce the processing time of the software operations in the receiver, a shared memory structure is used with a dynamic data control, and the byte-type IF data is processed through an Open Multi-Processing technique in the mixer and integrator which requires the most computational load. A high speed data acquisition device is used to capture the incoming high-rate IF signals. The FFT-IFFT correlation technique is used for initial acquisition and FLL assisted PLL is used for carrier tracking. All software modules are operated in sequence and are synchronized with pre-defined time scheduling. The performance of the designed software GPS receiver is evaluated by running it in real-time using the real GPS signals.

• 한국군사과학기술학회지
• /
• 제24권5호
• /
• pp.527-536
• /
• 2021

In wireless environments, wideband receivers are used in a communication intelligent system to detect unknown signals and obtain azimuth information. To design a wideband receiver that performs multiple signal detection and direction finding simultaneously, it is necessary to consider a reception structure composed of multiple channels. In this paper, we propose a wideband multi-channel receiver for direction finding of unknown wideband communication signals including frequency hopping signals. A signal processing method for detecting received signals and estimating azimuth information is presented, and components of the manufactured wideband receiver are described. In addition, test results of the signal detection performance by mounting the proposed wideband multi-channel receiver on the flight system are included.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.328-332
• /
• 2007

The structure of MMSE receiver frontended by CMA array working in CDMA forward link is proposed. By using the despreaded pilot signal of forward link as a reference signal, CMA array can capture multi-path signals securely even in severely faded mobile channel. The remaining MAl (Multiple Access Interference) is cancelled by the cascaded MMSE receiver. Through computer simulation, it is proved that the proposed system shows much better BER performance than any other systems. As a mobile based spatio-temporal receiver, the proposed system also reduces implemental cost and complexity by adopting the simplest algorithm for its spatial and temporal domain processing.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.333-338
• /
• 2007

In this paper we propose a new structure of the long code MMSE receiver with pilot channel, which maintians excellent symbol detection capability even in the presence of Rayleigh fading. We explain analytically how the stability of the receiver weight vector, which is critical to the system performance, can be achieved by compensating the error signal as well as received signal vector distorted by fading channel. Computer simulation shows while maintaining better performance than the conventional matched filter receiver, the proposed long code MMSE receiver can extend its period up to $16{\times}T_b$ in a fading environment.