• Journal of the Korean Geophysical Society
• /
• v.9 no.3
• /
• pp.241-248
• /
• 2006

In this study, we applied the teleseismic receiver function technique to determine the crustal thicknesses and ratios for 31 broadband stations of the Korean Peninsula and map out the lateral variation of Moho depth in the Peninsula. The estimated depths to Moho range from 26 to 35 km except for an island station ULL (17 km). The Moho is turned out to be deeper in the south-western part of the Peninsula and western Gyeongsang basin, and shallower in the off-shore region close to East Sea (Sea of Japan). The ratio varies from 1.69 to 1.89 with the average of 1.77, which is close to global average (1.78) in the crust.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.6 no.1
• /
• pp.27-31
• /
• 1981

This paper deals with the variation of the effective detectability factor fo logarithmic receiver in noise interference environment. The computed results as a function of maximum detection range and jamming range were compared with the effective detectability factor for linear receiver. Even though the logarithmic receiver has a wide dynamic characteristics, it is found that the effective detectability factor being reduced about 15% than the linear receiver at 100 KM range.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.926-937
• /
• 2016

In this paper, we study the feasibility of receiver diversity for application to downlink cellular networks, where low-energy devices are equipped with information decoding and energy harvesting receivers for simultaneous wireless information and power transfer. We compare several options that are based on selection combining and maximum ratio combining, which provide different implementation complexities. By capitalizing on the Frechet inequality, we shed light on the advantages and limitations of each scheme as a function of the transmission rate and harvested power that need to be fulfilled at the low-energy devices. Our analysis shows that no scheme outperforms the others for every system setup. It suggests, on the other hand, that the low-energy devices need to operate in an adaptive fashion, by choosing the receiver diversity scheme as a function of the imposed requirements. With the aid of stochastic geometry, we introduce mathematical frameworks for system-level analysis. We show that they constitute an important tool for system-level optimization and, in particular, for identifying the diversity scheme that optimizes wireless information and power transmission as a function of a sensible set of parameters. Monte Carlo simulations are used to validate our findings and to illustrate the trade-off that emerge in cellular networks with simultaneous wireless information and power transfer.

• Economic and Environmental Geology
• /
• v.31 no.1
• /
• pp.21-29
• /
• 1998

Broadband receiver functions are developed from teleseismic P waveforms recorded at Wonju (KSRS), Inchon (IRIS), and Pohang (PHN), and are analyzed to examine the crustal structure beneath the three stations. The teleseismic receiver functions are inverted in the time domain to the vertical P wave velocity structure beneath the stations. Clear P-to-S converted phases from the Moho interface are observed in teleseismic seismograms recorded at the three stations. We estimated the crustal velocity structures beneath the stations using the receiver function inversion. The general features of inversion results are as follows: (1) For Pohang station, there is a high velocity gradient at a 4~5 km deep for SE and NW back azimuth and a low velocity zone at around 10 km deep. The Moho depth is 28 km for NW direction. (2) The shallow crustal structure beneath Wonju station is somewhat complex and there is a high-velocity zone ($V_p{\simeq}6.8km/sec$) at 3 to 4 km deep. The average crustal thickness is 33 km, and a transition zone exists at a 30~33 km deep of lower crust, of which velocity is abruptly changed 6.4 to 7.9 km/sec. (3) For Inchon station, the crustal velocity gradient monotonously increases up to the Moho discontinuity and the velocity is abruptly changed from 6.2 km/sec to 7.9 km/sec at 29 km deep.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.191-195
• /
• 1987

When a 160QAM receiver in the band of spread spectrum system is interfered with a pseudo-random frequency-hopp-ing signal the interference signal has the form of the pulse amplitude probability density function. Each interfrering pulse amplitude probability density function Each interfering pulse amplitude is dependent upon theprobability density function of hopping frequency and the selectivity characteristic of 16QAM system in this paper the error rate equation of a system performance has been derived in the above condition which are interfrerence form and impulsive noise environmensts. The results of system analysis show us that the system performance is de-graded by impulsive noise and interference power, which improved as the frequency hopping bandsidth increases whit respect to receiver bandwidth

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.675-678
• /
• 2015

In this paper, we proposed a multi-function conversion block for microwave receiver. The proposed multi-function conversion block is composed of a broadband voltage controlled oscillator and a dual-mode mixer. Depending on whether the bias voltage is supplied, the first IF(Intermediate Frequency) output frequency(4,595 MHz/6,045 MHz) needed in microwave receiver is converted to 720 MHz and the another IF output frequency(720 MHz) for receiving Ku-band has the multi-functional operations of the dual mode that are bypass and attenuation without frequency conversion. Implementation and measurement results show that each intermediate frequency has conversion loss characteristic according to the LO power. The LO power conversion loss of 4,595 MHz at the LO levels from 2 dBm to 4 dBm is 13 dB, another of 6,035 MHz is 12 dB and the other of 720 MHz is 7.0 dB.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.145-152
• /
• 2010

In this paper, we developed a local oscillator (LO) system of millimeter wave band receiver for radio astronomy observation. We measured the phase and amplitude drift stability of this LO system. The voltage control oscillator (VCO) of this LO system use the 3 mm band Gunn oscillator. We developed the digital phase locked loop (DPLL) module for the LO PLL function that can be computer-controlled. To verify the performance, we measured the output frequency/power and the phase/amplitude drift stability of the developed module and the commercial PLL module, respectively. We show the good performance of the LO system based on the developed PLL module from the measured data analysis. The test results and discussion will be useful tutorial reference to design the LO system for very long baseline interferometry (VLBI) receiver and single dish radio astronomy receiver at the 3 mm frequency band.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.457-459
• /
• 2005

In this paper the BER consideration of a quadrature receiver that has an autocalibration method is considered. The analysis is based on the derivation of the statistical characteristics of the imbalances in gain and phase between in-phase and quadrature components that may cause severe performance degradation of the receiver. The density. mean and variance functions of the estimates of gain and phase imbalances are discussed. Then it is shown that the estimates are asymptotically minimum variance unbiased with respect to the integration time in sampling. A brief consideration on the BER calculation follows.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5C
• /
• pp.555-560
• /
• 2003

For synchronous direct sequence-code division multiple access (DS-CDMA) systems, the authors propose an adaptive radial basis function (RBF) receiver with suboptimal structure that reduces not only the complexity with regard to the number of centers but also the quantity of instructions required per one bit reception. The proposed receiver is constructed with parallel RBF networks. Each RBF network has the same procedure as the conventional RBF receiver. The performance of each RBF network is affected by interferences which are assigned to the other RBF networks because neither RBF network uses the full user set. To combat these interferences, the partial IC technique is employed. Monte Carlo simulations over additive white Gaussian noise (AWGN) channels confirm that the proposed receiver with its reduced complexity is able to obtain near-optimum performance. Moreover, the proposed receiver is able to properly cope with a various environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.330-335
• /
• 2002

In the direct sequence code division multiple access system, the problem of multiple access interference due to multiple access is generated. A interference cancelling receiver is used to solve this problem. The conventional interference cancelling receiver is structure of successive interference canceller using antenna array. In this structure, the difference of between method I and method II depends on updating weight vector. In this paper, the adaptive blind CMA array interference cancelling receiver using cost function of constant modulus algorithms is proposed to update weight vector at conventional structure. The simulation compared the proposed interference cancelling receiver with two conventional interference cancelling receivers by signal to interference ratio and bit error rate curve under additive white Gaussian noise environment. The simulation results show that the proposed receiver has about the gain of SIR of 1.5[dB] more than method I which is conventional receiver at SIR curve, and about the gain of SIR of 0.5(dB) more than method II. In BER curve, the proposed IC receiver about the gain of SNR of 2[dB] more than method I and about the gain of SNR of 0.5[dB] more than method If, Thus, the proposed interference cancelling receiver has the higher performance than conventional interference cancelling receivers.