• 제목/요약/키워드: receiver

검색결과 6,392건 처리시간 0.032초

Receiver Protection from Electrical Shock in Vehicle Wireless Charging Environments

  • Park, Taejun;Hwang, Kwang-il
    • Journal of Information Processing Systems
    • /
    • 제16권3호
    • /
    • pp.677-687
    • /
    • 2020
  • This paper deals with the electrical shock that can occur in a car wireless charging system. The recently released the Wireless Power Consortium (WPC) standard specifies that the receiver must be protected from the radio power generated by the transmitter and presents two scenarios in which the receiver may be subjected to electrical shock due to the wireless power generated by the transmitter. The WPC also provides a hardware approach for blocking the wireless power generated by the transmitter to protect the receiver in each situation. In addition, it presents the hardware constraints that must be applied to the transmitter and the parameters that must be constrained by the software. In this paper, we analyze the results of the electric shock in the vehicle using the WPC certified transmitter and receiver in the scenarios presented by WPC. As a result, we found that all the scenarios had electrical shocks on the receiver, which could have a significant impact on the receiver circuitry. Therefore, we propose wireless power transfer limit (WPTL) algorithm to protect receiver circuitry in various vehicle charging environments.

A 0.9-V human body communication receiver using a dummy electrode and clock phase inversion scheme

  • Oh, Kwang-Il;Kim, Sung-Eun;Kang, Taewook;Kim, Hyuk;Lim, In-Gi;Park, Mi-Jeong;Lee, Jae-Jin;Park, Hyung-Il
    • ETRI Journal
    • /
    • 제44권5호
    • /
    • pp.859-874
    • /
    • 2022
  • This paper presents a low-power and lightweight human body communication (HBC) receiver with an embedded dummy electrode for improved signal acquisition. The clock data recovery (CDR) circuit in the receiver operates with a low supply voltage and utilizes a clock phase inversion scheme. The receiver is equipped with a main electrode and dummy electrode that strengthen the capacitive-coupled signal at the receiver frontend. The receiver CDR circuit exploits a clock inversion scheme to allow 0.9-V operation while achieving a shorter lock time than at 3.3-V operation. In experiments, a receiver chip fabricated using 130-nm complementary metal-oxide-semiconductor technology was demonstrated to successfully receive the transmitted signal when the transmitter and receiver are placed separately on each hand of the user while consuming only 4.98 mW at a 0.9-V supply voltage.

Receiver Design for Satellite Navigation Signals using the Tiered Differential Polyphase Code

  • Jo, Gwang Hee;Noh, Jae Hee;Lim, Deok Won;Son, Seok Bo;Hwang, Dong-Hwan;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제10권4호
    • /
    • pp.307-313
    • /
    • 2021
  • Modernized GNSS signal structures tend to use tiered codes, and all GNSSs use binary codes as secondary codes. However, recently, signals using polyphase codes such as Zadoff-Chu sequence have been proposed, and are expected to be utilized in GNSS. For example, there is Tiered Differential Polyphase Code (TDPC) using polyphase code as secondary code. In TDPC, the phase of secondary code changes every one period of the primary code and a time-variant error is added to the carrier tracking error, so carrier tracking ambiguity exists until the secondary code phase is found. Since the carrier tracking ambiguity cannot be solved using the general GNSS receiver architecture, a new receiver architecture is required. Therefore, in this paper, we describe the carrier tracking ambiguity and its cause in signal tracking, and propose a receiver structure that can solve it. In order to prove the proposed receiver structure, we provide three signal tracking results. The first is the differential decoding result (secondary code sync) using the general GNSS receiver structure and the proposed receiver structure. The second is the IQ diagram before and after multiplying the secondary code demodulation when carrier tracking ambiguity is solved using the proposed receiver structure. The third is the carrier tracking result of the legacy GPS (L1 C/A) signal and the signal using TDPC.

영기선 테스트를 이용한 GNSS 수신기 조합별 코드의사거리 이중차분 잡음 특성 분석 (Analysis of Double-Differenced Code-Pseudorange Noise Characteristics of GNSS Receiver Combinations using Zero-Baseline Test)

  • 박봉규;박관동
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제13권3호
    • /
    • pp.245-256
    • /
    • 2024
  • Following the introduction of civilian navigation, the commercial Global Navigation Satellite System (GNSS) receivers' market has been expanding in various fields such as autonomous driving and smart cities. With improved receiver performance and widespread use of GNSS, the configurations of base and rover receivers are becoming more complex. As a result, user must consider combinations of base stations with different qualities, costs, and performances. To address these issues, we conducted zero-baseline tests to analyze the double-differenced code-pseudorange noise of various receiver combinations, ranging from low- to high-cost. The results showed that the noise varied depending on the receiver combination. Notably, receivers from the same manufacturer exhibited similar noise and positioning errors despite significant price differences. We also found that the double-differenced noise of all receiver combinations was correlated with the Carrier-to-Noise Density Ratio (C/N0), the satellite elevation angle, and the Doppler shift, and it did not perfectly follow a normal distribution. Further analysis based on Modified Allan Deviation (MDEV) showed that different types of noise were observed for each receiver combination and the double-differenced noise and positioning errors have similar statistical characteristics. From this study, the importance of receiver combinations and their various characteristics can be better understood.

수중음향통신을 위한 훈련 신호 구간의 비트 오차율에 기반한 레이크 수신기 (Rake Receiver Based on Bit Error Rate of Training Sequence Duration for Underwater Acoustic Communication)

  • 손지홍;김기만
    • 한국정보통신학회논문지
    • /
    • 제20권5호
    • /
    • pp.887-894
    • /
    • 2016
  • 수중음향통신 채널은 다중 경로 전달이 주요 장애 요인이 되며, 이러한 문제점을 해결하기 위해 레이크 수신기를 이용하여 이를 통해 시간 다이버시티 효과를 얻을 수 있다. 그러나 수중음향통신 채널은 시변동성이 높은 채널로써 적합하지 못한 경로의 신호를 복조에 이용하게 될 우려가 있다. 이를 방지하기 위해 본 논문에서는 훈련 신호의 오차율에 기반을 두어 경로 선택 및 가중치 할당하는 레이크 수신기를 제안한다. 호수 실험을 통해 제안된 레이크 수신기와 기존의 레이크 수신기, 레이크 방법을 사용하지 않은 일반 수신기를 이용하여 성능을 분석하였다. 분석 결과, 전송비트 512개 중에서 제안된 레이크 수신기는 8개, 기존의 레이크 수신기는 45개, 그리고 레이크 수신기를 사용하지 않은 일반 수신기는 72개의 비트오류가 발생하였다.

제한된 메모리의 모바일 수신자를 고려한 수신자 기반 TCP 흐름 제어 (A Receiver-driven TCP Flow Control for Memory Constrained Mobile Receiver)

  • 이종민;차호정
    • 한국정보과학회논문지:정보통신
    • /
    • 제31권1호
    • /
    • pp.91-100
    • /
    • 2004
  • 본 논문은 제한된 메모리를 가진 모바일 수신자를 고려한 무선 상태 적응적인 TCP 흐름 제어방법을 제안한다. 수신자에 의한 TCP 흐름 제어는 수신자에서 Advertised 윈도우를 조정함으로써 수행된다 제안된 방법은 수신자가 사용 가능한 무선 대역폭과 패킷 전송 지연 시간을 동적으로 측정하며, 측정된 정보를 기반으로 Advertised 윈도우를 적절히 조정한다. 무선 상태를 반영한 Advertised 윈도우의 조정으로 인해 송신자의 전송 성능 향상과 종단간 패킷 전송 지연 시간을 줄일 수 있다. 제안된 방법은 수신자에서의 TCP 변경만으로 구현될 수 있고 송신자나 중간 라우터의 변경을 필요로 하지 않는다. 제안된 방법의 구현과 CDMA2000 1x 환경에서의 실험을 통해 수신자 버퍼 크기가 2896 Bytes일 경우, 흐름 제어를 사용할 때가 기존 방식보다 전송률을 약 5배 향상시킬 수 있음을 보인다. 또한, 수신자 버퍼 크기가 64 KBytes일 경우 흐름 제어를 사용할 때가 기존 방식보다 때보다 종단간 패킷 왕복 시간은 반 이하로 줄일 수 있음을 보인다.

CDSK 방식의 카오스 통신 시스템의 새로운 송·수신기 설계 (A Novel Transmitter and Receiver Design of CDSK-Based Chaos Communication System)

  • 이준현;유흥균
    • 한국전자파학회논문지
    • /
    • 제24권10호
    • /
    • pp.987-993
    • /
    • 2013
  • 카오스 통신 시스템은 신호의 비예측성, 광대역성, 비주기성, 구현의 용이성 등의 특징을 가지고 있다. 또한, 카오스 방정식의 초기 조건이 미세하게 변함에 따라 카오스 신호는 전혀 다른 신호가 되기 때문에, 카오스 통신은 초기 조건에 민감하다는 특징을 갖는다. 이런 특징으로 인해 카오스 통신 시스템은 다른 디지털 통신 시스템보다 보안성이 우수하게 평가된다. 하지만 기존 카오스 통신 시스템의 송수신기는 레퍼런스 신호나 잡음에 많은 영향을 받기 때문에, BER(Bit Error Rate) 성능은 다른 디지털 시스템보다 나쁘게 평가된다. 그래서 카오스 통신시스템의 BER 성능 향상과 관련된 연구는 지속적으로 활발하게 이루어지고 있다. 본 논문에서는 BER 성능 향상을 위한 새로운 CDSK(Correlation Delay Shift Keying) 수신기를 제안한다. 그리고 기존 수신기와 제안한 수신기의 BER 성능 비교를 통해서 제안한 수신기의 BER 성능 향상을 평가한다. 하지만 제안하는 수신기를 사용하는 경우 BER 성능은 크게 향상되지만, 기존의 송신기를 사용하면 제안하는 수신기뿐만 아니라, 비록 BER 성능은 안 좋더라도 기존의 수신기로도 정보 신호를 복원할 수 있다. 따라서 제안하는 수신기의 보안성을 향상시키기 위해서는 제안하는 수신기로만 정보 비트를 복원할 수 있는 새로운 CDSK 송신기를 제안한다. 제안하는 송신기를 이용하여 정보 신호를 전송하는 경우에 기존의 수신기로는 정보 신호를 복원할 수 없고, 제안한 수신기를 사용해야 정보 신호를 복원할 수 있다.

A 9 mW Highly-Digitized 802.15.4 Receiver Using Bandpass ∑Δ ADC and IF Level Detection

  • Kwon, Yong-Il;Park, Ta-Joon;Lee, Hai-Young
    • Journal of electromagnetic engineering and science
    • /
    • 제8권2호
    • /
    • pp.76-83
    • /
    • 2008
  • A low power(9 mW) highly-digitized 2.4 GHz receiver for sensor network applications(IEEE 802.15.4 LR-WPAN) is realized by a $0.18{\mu}m$ CMOS process. We adopted a novel receiver architecture adding an intermediate frequency (IF) level detection scheme to a low-power complex fifth-order continuous-time(CT) bandpass L:tl modulator in order to digitalize the receiver. By the continuous-time bandpass architecture, the proposed $\Sigma\Delta$ modulator requires no additional anti-aliasing filter in front of the modulator. Using the IF detector, the achieved dynamic range(DR) of the over-all system is 95 dB at a sampling rate of 64 MHz. This modulator has a bandwidth of 2 MHz centered at 2 MHz. The power consumption of this receiver is 9.0 mW with a 1.8 V power supply.

Alamouti 구조를 이용한 ATSC 방송 시스템 설계 (Design of ATSC Broadcasting Systems Using the Alamouti Scheme)

  • 박성익;정태진;김승원;이수인
    • 방송공학회논문지
    • /
    • 제9권1호
    • /
    • pp.32-42
    • /
    • 2004
  • 본 논문에서는 다중 송/수신안테나를 가지는 시공간 블록 부호를 ATSC (Advanced Television Systems Committee) 지상파 방송 시스템에 적용하는 방법을 다루며, 특히, 2개의 송신 안테나와 다수의 수신안테나를 가지는 Alamouti의 구조를 ATSC 방송 시스템에 적용해 본다. 또한, 다중 수신안테나를 가지는 다이버시티 기법과 다중 송/수신안테나를 가지는 시공간 블록 부호의 구조를 비교해 본다. 전산 실험에 의하면. 다중 송/수신안테나를 가지는 ATSC 방송 시스템은 단일 송/수신안테나를 가지는 방송 시스템보다 Rayleigh 페이딩 채널 환경에서 매우 우수한 성능을 가진다.

무선망에서 Turbo 코드를 이용한 효율적 수신기 설계 (Design of effective Receiver in Wireless Network using turbo code)

  • 석경휴;최우진
    • 한국전자통신학회논문지
    • /
    • 제7권5호
    • /
    • pp.975-981
    • /
    • 2012
  • 본 논문에서는 다중 경로 채널 환경에서 터보 코드를 사용하여 광대역 CDMA 시스템의 수신 신호를 고려하고, 시스템의 성능을 분석합니다. Rayleigh 페이딩 채널 환경에서 터보 코드와 함께 레이크 수신기를 통해 수신된 신호를 전달하여 레이크 수신기의 가지 수에 따라 가변 시스템 대역폭에 대한 성능을 분석한다. 광대역 CDMA 시스템에서 수신기의 디자인을 위해서는 디코딩 및 레이크 수신기의 가지 수를 효율적인 매개 변수를 제시했습니다.