• Korean Journal of Remote Sensing
• /
• v.38 no.1
• /
• pp.73-82
• /
• 2022

Marine fisheries resources face major anthropogenic threat from unregulated fishing activities; thus require precise detection for protection through marine surveillance. Korea developed an efficient land-based small fishing vessel monitoring system using real-time V-Pass data. However, those data directly do not provide information on fishing activities, thus further efforts are necessary to differentiate their activity status. In Korea, especially in Busan, longlining is practiced by many small fishing vessels to catch several types of fishes that need to be identified for proper monitoring. Therefore, in this study we have improved the existing fishing status classification method by applying Hidden Markov Model (HMM) on V-Pass data in order to further classify their fishing status into three groups, viz. non-fishing, longlining and other types of fishing. Data from 206 fishing vessels at Busan on 05 February, 2021 were used for this purpose. Two tiered HMM was applied that first differentiates non-fishing status from the fishing status, and finally classifies that fishing status into longlining and other types of fishing. Data from 193 and 13 ships were used as training and test datasets, respectively. Using this model 90.45% accuracy in classifying into fishing and non-fishing status and 88.23% overall accuracy in classifying all into three types of fishing statuses were achieved. Thus, this method is recommended for monitoring the activities of small fishing vessels equipped with V-Pass, especially for detecting longlining.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2419-2425
• /
• 2017

In this paper, a system for the precise detection of arcs is proposed for a rigid catenary using a spectrometer. For this purpose, a miniature rigid catenary contact-loss simulator was used. Experiments were performed by varying the amplitude of the excitation frequency with which a real arc can occur using a simulator in the range of 5 to 15 mm. The range of the radiated wavelength of the copper, which is a material in the rigid catenary, and the irradiance were measured using a spectrometer according to the generated contact loss. In addition, the amount was monitored over time and its characteristics were analyzed. The voltage and current of the load were analyzed when the arc occurred due to contact loss. The analytical results will be applied to detect rigid catenary arcs and used as a monitoring system for real vehicles developed in the future. This will prevent abrasion and disconnection in rigid catenary systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.746-753
• /
• 2004

In this paper, the Power Management System(PMS) which based on a decision making system according to power strategy is proposed and implemented. PMS is designed to have functions of power monitoring. controlling, synchronizing load sharing and monitoring of driving engine, etc. PMS consists of the internet communication system(ICS). Remote Management System(RMS) and Sensor Driver System (SDS) ICS transmits the monitoring and supervisory data via Internet to Remote Management System(RMS) in real-time SDS detects various power system data on local generator and utility via I/O interface system. I/O interface system receives various status data and outputs control signals. Implemented PMS is tested with dummy signal to verify proposed functions and shows good results. For future study implemented PMS will be tested under real load condition to merchandize.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.05a
• /
• pp.129-133
• /
• 2003

The work described in this paper deals with the proposed application of an Artificial Neural Network Model for the Advanced Pressurized Water Reactor APR-1400 transient identification. The approach adopted for testing the network take note of the expectation which should be fulfilled by a network for real-time application, like testing with data in on-line mode and use of actual or real-life patterns for training. The recall test performed demonstrates that use of neural network for transient identification is indeed an attractive preposition.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.216-218
• /
• 2017

The imbalance at the 3-phase side at the railway power supply substation has been a well-known issue. Due to the difference in status of loads at each phase at any given moment, it is difficult to maintain the balance in the 2-phase side of the transformer. Consequently, the 3-phase side also presents a certain level of imbalance as well. A co-phase power supply was proposed as a solution. The real application of such system is gradually expanding, proving the effectiveness of the system. In this paper, the application of the single phase D-Q rotating frame theory was applied to the control of the co-phase power supply system. In addition, the power stack of the system was composed of MMC valves, which offers superior operational characteristics. The effectiveness of the system was verified with a real-time simulation, and the results are presented.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.2
• /
• pp.33-41
• /
• 2004

This paper describes a development of smart power outlet and controller installation which is equipped for discrete power load environment such as office and home appliance. This system will sense a real-time power consumption and analyze the status, then, will keep optimal power use condition. The proposed method is applied to the real design, and that experimental results showed good performances on the wall-outlet, also, is expected to be used in the smart home automation installations.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.163-165
• /
• 2012

Impedance spectroscopy informs electrical properties of materials as accumulated charges, contact status between electrode and organic materials. We carried out impedance spectroscopy of organic light-emitting diodes as ITO/Alq3(60 nm)/Al on temperatures from 10 K to 300 K. The result described Z'-Z" plot, cole-cole plot and dielectric relaxation time τ. Z'-Z" plot means that real and imaginary part of materials in organic and electrode by frequencies and temperature. Z' as real part of impedance by applied frequency depending on temperature shows the plateau in low frequency region as Rs+ Rp and over 100 kHz in high frequency region as Rs. Cole-cole plot shows resistance of materials in equivalent circuit of the device by temperatures. And equivalent circuit and dielectric relaxation could be accomplished by using the complex impedance analysis.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.8
• /
• pp.253-258
• /
• 2015

From the point of view of u-healthcare, heart rate is so useful for both illness for taking care of patients and wellness for improving the level of health and wellbeing. It is because heart rate is a significant clinical variable for all kinds of diseases as well as an indicator of the intensity of exercise. Recently, a number of various wearable heart rate monitors have been released to check people's status in the body by monitoring their heart rates. In addition, a number of smartphone applications have been released to conveniently monitor the status of exercise by using heart rate monitors. However, all of these applications are limited to a personal usage. In this paper, we will design a system to simultaneously monitor heart rates coming from multiple users in a real-time, and develop an Android application to apply the system. The application mainly features a simultaneous monitoring of heart rates coming from multiple users, allowing to be effectively applied to fitness centers.

• Journal of the Korea Convergence Society
• /
• v.7 no.1
• /
• pp.49-55
• /
• 2016

In a delegate authentication, a user can lend his/her own authentication data to the third parties to let them be authenticated instead of himself/herself. The user authentication schemes based on the memory of unique data such as password, are vulnerable to this type of attack. Biometric authentication could minimize the risk of delegate authentication since it uses the biometric data unique by each person. Group authentication scheme is used to prove that each group member belongs to the corresponding group. For applications such as an electronic voting or a mobile meeting where the number of group members is changing dynamically, a new group authentication method is needed to reflect the status of group in real time. In this paper, we propose biometric authentication based dynamic group signature scheme. The proposed scheme is composed of biometric key generation, group public key creation, group signature generation, group signature verification and member update protocols. The proposed member update protocol is secure against colluding attacks of existing members and could reflect group status in real time.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.156-161
• /
• 1992

In this research a monitoring system for turning using NC information and the current of feed motor as a monitoring signal was developed. The overall system consists of modules such as learning process, NC data transmission, generation of forecast information, signal acquisition, monitoring and post process. In the learning process, the reference data and the cutting force equation necessary for monitoring are obtained from the accumulated monitoring results. In the generation of forecast information, the information of forecasted cutting forces is acquired from the cutting force equation and NC program and appended to each NC block as a monitor code. Reliability of monitoring is improved by using the monitor code in the real-time monitoring. Monitoring module is divided into two parts : the off-line monitoring where errors of NC program are checked and the on-line monitoring where the level of motor current is monitored during cutting operations. If the actual current level exceeds the limit value provided by the monitor code in the level monitoring, it is recognized as abnormal. In the event of abnormal status, the post processor sends the emergency stop signal to NC controller to stop the operation. Actual experiments have shown that the developed monitoring system works well.