• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.4
• /
• pp.8-15
• /
• 2011

This paper proposes a real-time navigation algorithm which integrates the artificial potential field (APF) for an unmanned vehicle in the unknown environment. This approach uses repulsive potential function around the obstacles to force the vehicle away and an attractive potential function around the goal to attract the vehicle. In this research, laser range finder is used as range sensor. An obstacle detected by the sensor creates repulsive vector. Differential global positioning system (DGPS) and digital compass are used to measure the current vehicle position and orientation. The measured vehicle position is also used to create attractive vector. This paper proposes a new concept of potential field based navigation which controls unmanned vehicle's speed and steering. The magnitude of repulsive force based on the proposed algorithm is designed not to be over the magnitude of attractive force while the magnitude is increased linearly as being closer to obstacle. Consequently, the vehicle experiences a generalized force toward the negative gradient of the total potential. This force drives the vehicle downhill towards its goal configuration until the vehicle reaches minimum potential and it stops. The effectiveness of the proposed APF for unmanned vehicle is verified through simulation and experiment.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.719-728
• /
• 2017

This paper proposes a synthesis of new guidance law to generate an evasive maneuver against enemy's missile interception while considering its impact angle, acceleration, and field-of-view constraints. The first component of the synthesis is a new function of repulsive Artificial Potential Field to generate the evasive maneuver as a real-time dynamic obstacle avoidance. The terminal impact angle and terminal acceleration constraints compliance are based on Time-to-Go Polynomial Guidance as the second component. The last component is the Logarithmic Barrier Function to satisfy the field-of-view limitation constraint by compensating the excessive total acceleration command. These three components are synthesized into a new guidance law, which involves three design parameter gains. Parameter study and numerical simulations are delivered to demonstrate the performance of the proposed repulsive function and guidance law. Finally, the guidance law simulations effectively achieve the zero terminal miss distance, while satisfying an evasive maneuver against intercept missile, considering impact angle, acceleration, and field-of-view limitation constraints simultaneously.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.5
• /
• pp.227-239
• /
• 2012

Recent advances in electronics have enabled various conventional products to incorporate with numerous powerful microcontroller. Generally, an embedded system is a computer system designed for specific control functions within a larger system, often with real-time computing constraints. The growing performance and reliability of hardware components and the possibilities brought by various design method enabled implementing complex functions that improve the comport of the system's occupant as well as their safety. A cyber physical system (CPS) is a system featuring a tight combination of, and coordination between, the system's computational and physical elements. The concept of cyber physical system, including physical elements, cyber elements, and shared networks, has been introduced due to two general reasons: design flexibility and reliability. This paper presents a cyber physical system where system components are connected to a shared network, and control functions are divided into small tasks that are distributed over a number of embedded controllers with limited computing capacity. In order to demonstrate the effectiveness of cyber physical system, an unmanned forklift with autonomous obstacle avoidance ability is implemented and its performance is experimentally evaluated.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.11-15
• /
• 2015

Purpose - Robot path planning, a constrained optimization problem, has been an active research area with many methods developed to tackle it. This study proposes the use of a Rapidly-exploring Random Tree and Particle Swarm Optimizer algorithm for path planning. Research design, data, and methodology - The grid method is built to describe the working space of the mobile robot, then the Rapidly-exploring Random Tree algorithm is applied to obtain the global navigation path and the Particle Swarm Optimizer algorithm is adopted to obtain the best path. Results - Computer experiment results demonstrate that this novel algorithm can rapidly plan an optimal path in a cluttered environment. Successful obstacle avoidance is achieved, the model is robust, and performs reliably. The effectiveness and efficiency of the proposed algorithm is demonstrated through simulation studies. Conclusions - The findings could provide insights to the validity and practicability of the method. This method makes it is easy to build a model and meet real-time demand for mobile robot navigation with a simple algorithm, which results in a certain practical value for distribution environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.270-286
• /
• 2012

In this paper, we propose a novel routing protocol called the Cartography Enhanced OLSR (CE-OLSR) for multi hop mobile ad hoc networks (multi hop MANETs). CE-OLSR is based on an efficient cartography gathering scheme and a stability routing approach. The cartography gathering scheme is non intrusive and uses the exact OLSR reduced signaling traffic, but in a more elegant and efficient way to improve responsiveness to the network dynamics. This cartography is a much richer and accurate view than the mere network topology gathered and used by OLSR. The stability routing approach uses a reduced view of the collected cartography that only includes links not exceeding a certain distance threshold and do not cross obstacles. In urban environments, IEEE 802.11 radio signals undergo severe radio shadowing and fading effects and may be completely obstructed by obstacles such as buildings. Extensive simulations are conducted to study the performances of CE-OLSR and compare them with those of OLSR. We show that CE-OLSR greatly outperforms OLSR in delivering a high percentage of route validity, a much higher throughput and a much lower average delay. In particular the extremely low average delay exacerbated by CE-OLSR makes it a viable candidate for the transport of real time data traffic in multi hop MANETs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1503-1517
• /
• 1994

Intelligent Motion Planning System(IMPS) is presented for a robot to achieve an efficient path toward the given target point in two dimensional unknown environment is constructed with unrestricted obstacle shapes. IMPS consists of three components for making intelligent motion. These components are real-time motion planning algorithm based on a discontinous boundary method, fuzzy neural network decision system for heuristic knowledge representation, and world modeling with forgetting and reinforcing memory cells. First of all, in real-time motion planning algorithm, the behavior-based architectural method is used to generate subgoal. A behavior generates a subgoal independently by using the method of discontinuous boundary in sensed area. The discontinuous boundary method is a new proposed fast obstacle avoidance algorithm. The second component is fuzzy neural network decision system for accomplishing the subgoal. The heuristic rules are imbedded on the fuzzy neural network to make an intelligent decision. The last one is a forgetting, reinforcing memory technique for the construction of external world map. The activation values of all activated memory cells in grid space are decreased monotonically and after all they are burned out. Therefore, after sufficient journey, robot can have a stationary world map even if the dynaic obstacles exist. Using the IMPS, several simulations show the efficient achievement of target point in unknown enviroment with obstcles of various shapes.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.2
• /
• pp.268-275
• /
• 2011

This paper proposes two optimal path planning methods of a mobile robot using uDEAS (univariate Dynamic Encoding Algorithm for Searches). Before start of autonomous traveling, a self-controlled mobile robot must generate an optimal global path as soon as possible. To this end, numerical optimization method is applied to real time path generation of a mobile robot with an obstacle avoidance scheme and the basic path generation method based on the concept of knot and node points between start and goal points. The first improvement in the present work is to generate diagonal paths using three node points in the basic path. The second innovation is to make a smooth path plotted with the blending polynomial using uDEAS. Effectiveness of the proposed schemes are validated for several environments through simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.10
• /
• pp.970-976
• /
• 2012

In this paper, a single LRF has been used to produce a 3D map for the mobile robot navigation. The 2D laser scanners are used for mobile robots navigation, where the laser scanner is applied to detect a certain level of area by the straight beam. Therefore it is limited to the usages of 2D obstacle detection and avoidance. In this research, it is designed to complement a mobile robot system to move up and down a single LRF along the yaw axis. During the up and down motion, the 2D data are stacked and manipulated to build a 3D map. Often a single LRF data are mixed with Gaussian and impulse noises. The impulse noises are removed out by the hybrid median filter designed in this research. The 2D data which are improved by deleting the impulse noises are layered to build the 3D map. Removing impulse noises while preserving the boundary is a main advantages of the hybrid median filter which has been used widely to improve the quality of images. The effectiveness of this hybrid median filter for rejecting the impulse noises has been verified through the real experiments. The performance of the hybrid median filter is evaluated in terms of PSNR (Peak Signal to Noise Ratio) and the processing time.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.77-85
• /
• 2024

In this dissertation, a we designed and implemented a patrol robot that integrates a thermal imaging camera, speed dome camera, PTZ camera, radar, lidar sensor, and smartphone. This robot has the ability to monitor and respond efficiently even in complex environments, and is especially designed to demonstrate high performance even at night or in low visibility conditions. An orbital movement system was selected for the robot's mobility, and a smartphone-based control system was developed for real-time data processing and decision-making. The combination of various sensors allows the robot to comprehensively perceive the environment and quickly detect hazards. Thermal imaging cameras are used for night surveillance, speed domes and PTZ cameras are used for wide-area monitoring, and radar and LIDAR are used for obstacle detection and avoidance. The smartphone-based control system provides a user-friendly interface. The proposed robot system can be used in various fields such as security, surveillance, and disaster response. Future research should include improving the robot's autonomous patrol algorithm, developing a multi-robot collaboration system, and long-term testing in a real environment. This study is expected to contribute to the development of the field of intelligent surveillance robots.