• Korean Journal of Remote Sensing
• /
• v.38 no.5_2
• /
• pp.669-683
• /
• 2022

The frequency and damage of forest fires have tended to increase over the past 20 years. In order to effectively respond to forest fires, information on forest fire damage should be well managed. However, information on the extent of forest fire damage is not well managed. This study attempted to present a method that extracting information on the area of forest fire in real time and quasi-real-time using visible infrared imaging radiometer suite (VIIRS) images. VIIRS data observing the Korean Peninsula were obtained and visualized at the time of the East Coast forest fire in March 2022. VIIRS images were classified without supervision using iterative self-organizing data analysis (ISODATA) algorithm. The results were reclassified using the relationship between the burned area and the location of the flame to extract the extent of forest fire. The final results were compared with verification and comparison data. As a result of the comparison, in the case of large forest fires, it was found that classifying and extracting VIIRS images was more accurate than estimating them through forest fire occurrence data. This method can be used to create spatial data for forest fire management. Furthermore, if this research method is automated, it is expected that daily forest fire damage monitoring based on VIIRS will be possible.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.147-156
• /
• 2023

Because the behavior of cable bridges is dominated by dynamic response and is relatively complex, short- and long-term field monitoring are often required to evaluate the bridge condition. If a permanent SHMS (Structural Health Monitoring System) is not installed, a portable monitoring system is needed for the checking of bridge condition. In this case, it can be difficult to operate the portable monitoring system due to limited conditions such as power and communication according to the location and type of the bridge. In this study, the portable-based smart structural response monitoring system is developed that can be effectively used for short- and long-term monitoring of cable bridges in Korea and Southeast Asia. The developed system is a multi-channel portable data acquisition and analyzer that can be operated for a long time in the field using its own power supply system, and is included with the automated analysis algorithm for the dynamic characteristics of cable bridges using real-time data. In order to evaluate the field applicability of the developed system, field demonstration was conducted on cable bridges in Korea and Vietnam. Through the demonstration, the reliability and efficiency of field operation of the developed system were confirmed, and additionally, the possibility of application to overseas markets was confirmed in cable bridge monitoring field.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.132-145
• /
• 2020

By coming of the 4th industrial revolution era, HD map have became a key infrastructure for determining precise location of autonomous driving in areas of futuristic cars, logistics and robots. Autonomous vehicles have became more dependent on HD map to determine the exact location of objects detected by various sensors such as LiDAR, GNSS, Radar, and stereo cameras as well as self-location decisions. By actualizing autonomous driving and C-ITS technologies, the demand for precise information on HD map have increased. And also the demand for the creation of new information based on the convergence of various changes and real-time information have increased. In this study, domestic and international HD map standards and related environments have analyzed. Based on this, usability has researched which comparison with standard HD map established by various institutions. Additionally, usability of standard HD map have studied for applying actual autonomous vehicles by reworking HD map. By the result of study, standard HD map have well established to use by various institutions. If further research about layer classification and definition by institutions will carried out based on this study, it has expected that and efficient establishment and renewal of HD map will take place.

• Journal of KIISE:Databases
• /
• v.33 no.7
• /
• pp.655-667
• /
• 2006

Due to the rapid development in mobile communication technologies, the usage of mobile devices such as cellular phones and PDAs becomes increasingly popular. One of the best ways to maximize the usability of mobile devices is to make them aware of their current locations and the locations of other fixed and mobile objects. In this paper, we propose a cost-effective Bus Information System, ACE-BIS, which utilizes a mobile device to retrieve the bus routes to reach a destination from the current location. To accomplish this task, ACE-BIS maintains a small amount of information on bus stops and bus routes in a mobile device and runs a heuristic routing algorithm based on such information. When a user asks more accurate route information or calls for a 'leave later query', ACE-BIS entrusts the task to a server into which real-time traffic and bus location information is being collected. By separating the roles into a mobile device and a server, ACE-BIS is able to provide bus routes at the lowest cost for wireless communications, without imposing much burden to a server. The results of extensive experiments revealed that ACE-BIS is effective and scalable in most experimental settings.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.65-71
• /
• 2008

Recently, the research is progressing on the SWE(Sensor Web Enablement) platform of OGC(Open Geospatial Consortium) to provide the sensing data and moving pictures collected in a sensor network through the Internet Web. However, existed research does not deal with moving objects like cars, trains, ships, and person. Therefore, we present a method to deal with integrated sensing data collected by GPS device, sensor network, and image devices. Also, this paper proposes an integrated processing method for image and sensing data based on location in mobile sensor networks. Additionally, according to proposed methods, we design and implement the combine adapter. This combine adapter receives a contexts data, and provides the common interface included parsing, queueing, creating unified message function. We verity the proposed method which deal with the integrated sensing data based on combine adapter efficiently. Therefore, the research is expected to help the development of a various context information service based on location in future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.47-58
• /
• 2016

In modern era Busan, newspaper articles about cherry blossom attractions from FuzanNippo and ChosenJiho have changed from places of landmark cherry trees to recreational activities under the cherry blossom. This means that the place characteristics of the cherry blossom attractions helped transform modern Busan. This study is to clarify the real image of the cherry blossom attractions where they were and when it was established in modern Busan. In order to discuss the location characteristics and the timing of identification as it changed from cherry-blossom viewing spots to picnic spots under the cherry blossom, current articles published in the FuzanNippo and ChosenJiho were collected. This study results are as follows: First of all, cherry blossom attractions are located in private gardens, gardens at hot spring inns, public lands such as schools, temples, reservoirs and malls such as Dongnae hot spring and the Midoricho red-light district. The location feature was that they were found at the edges of settlement environments, at the interface of city and natural spaces in modern Busan. Secondly, newspaper articles about cherry blossom attractions gradually changed from cherry blossom viewing spots to picnic spots under the cherry blossom, which became the peak of the cherry blossom attractions in modern Busan. The main focus of cherry blossom attractions changed from cherry-blossom viewing to picnicking under cherry blossoms around 1920. This means that the establishment of cherry blossom attractions can be seen around 1920. Articles of cherry-blossom viewing picked up sites not easy to access such as private gardens and reservoirs, articles about picnic spots under cherry blossoms noted public places that everyone could access. Cherry blossom attractions sites became spring resorts in modern Busan.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.2
• /
• pp.78-86
• /
• 2004

Recently GPS and mobile GIS technologies based on LBS(location based service) have played an important role as DSS(decision supporting system) for domestic forest fire extinguishment policies. In this study forest fire extinguishments information management system based on mobile GIS technique was designed to seize the exact location on wireless network so that it helps to guide the safe and efficient extinguishments affairs and provide the extinguishments environment toward ground fighting teams and the central forest government in real time. Moreover, possibly to operate this system, the foundation technologies by the name of '.gci' such as the spatial data compression method, the spatial data transmission method over wireless network and the spatial analysis interface on PDA should be mainly considered. Especially, in this study the spatial data compression method having high compression rate from 51% to 62% for each polygon, line, and point data, without the loss of data was developed.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.15-24
• /
• 2001

In order to achieve a desirable tooth movement, it is of great importance to control the M/F ratio and to know the location of the center of resistance. The purpose of this study was to locate the center of resistance and the axis of rotation, and to estimate the stress distribution in the periodontal ligament with experimental model. After preparing a model of an upper canine with a simulated periodontal ligament and alveolar bone, the force and moment were applied. The tooth movement was traced using measuring device with LVDTs(Linear variable differential transformers) that can measure three dimensional tooth movement in real time. The results were as follows. 1. The location of center of resistance by transverse force was $29\%$ of root length measured from alveolar crest to apex regardless of force magnitude. The position of the center of resistance is more coronal than that of two-dimensional model($42\%$). 2. The center of resistance and the axis of rotation coincide when couple moment was applied. 3. As the magnitude of moment increases, tooth tends to extrude irrespective of the direction of the moment. 4. The relationship between location of force and axis of rotation (a x b = $49.6\;mm^2$) was obtained. A tooth movement can be predicted through this formula. 5. The centers of rotation by transverse force were plotted linearly.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.102-116
• /
• 2021

For the safe operation of autonomous vehicles, the representative technology of the 4^th industrial revolution era, a combination of various technologies such as sensor technology, software technology and car technology is required. An autonomous vehicle is a vehicle that recognizes current location and situation by using the various sensors, and makes its own decisions without depending on the driver. Perfect recognition technology is required for fully autonomous driving. Since the precise road maps provide various road information including lanes, stop lines, traffic lights and crosswalks, it is possible to minimize the cognitive errors that occur in autonomous vehicles by using the precise road maps with location information of the road facilities. In this study, the definition, necessity and technical trends of the precise road map have been analyzed, and the HD(High Definition) map prototype based on the web GIS has been built in the autonomous driving-specialized areas of Daegu Metropolitan City(Suseong Medical District, about 24km), the Happy City of Sejong Special Self-Governing City(about 33km), and the FMTC(Future Mobility Technical Center) PG(Proving Ground) of Seoul National University Siheung Campus using the MMS(Mobile Mapping System) surveying results given by the National Geographic Information Institute. In future research, the built-in precise road map service will be installed in the autonomous vehicles and control systems to verify the real-time locations and its location correction algorithm.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.151-162
• /
• 2009

When viewing that since the 1990s local governments have tried to build golf courses as a plan to revitalize the attraction of home and abroad tourists and to increase their tax incomes and that big companies are interested in leisure business including golf courses as a future promising business in the 21st century, golf courses seem to continuously increase in the future. On the contrary, noticing that golf courses are not only the main culprit behind the damage of natural environment and environmental pollution but also a target of real estate speculation and that golf makes a sense of incongruity between the classes of a society as a luxury sports, environment activists and local residents raise criticism to golf. Golf in our country shows a special sports phenomenon of which the pros and cons appear continuously. So, it is judged that policy for golf development direction should be set up based on verified scientific data. Thus, the research aims at deriving the location types of golf courses by looking at laws from the period of formation of the initial domestic golf courses to the recent period, grasping their distribution status according to time series and regions, conducting a questionnaire survey regarding location factors for golfers and the workers of golf courses, and dividing golf courses into several types. It is expected that the research will be a fundamental material when a golf course is built later on, contributing to the research of golf courses.