• 제목/요약/키워드: real scale experimental

검색결과 340건 처리시간 0.028초

세장비 및 대각철근 유무에 따른 고강도 철근보강 콘크리트 연결보의 전단성능 (Effect of Aspect Ratio and Diagonal Reinforcement on Shear Performance of Concrete Coupling Beams Reinforced with High-Strength Steel Bars)

  • 김선우;장석준;윤현도;서수연;천영수
    • 콘크리트학회논문집
    • /
    • 제29권1호
    • /
    • pp.43-51
    • /
    • 2017
  • 현행 규정에 따르면, 세장비 4 미만의 연결보에 대각철근을 사용하도록 규정하고 있다. 그러나 대각선 다발철근 상세는 보 내부의 철근 배근작업을 어렵게 만들고, 이는 또한 시공불량으로 이어질 수 있다. 본 연구에서는 고강도 철근(SD500 및 SD600)으로 보강된 콘크리트 연결보에 관한 실험결과를 나타내었다. 연결보 제작시 시공성을 향상시키기 위하여, 본 연구에서는 헤드바를 갖는 대구경 철근을 사용하였다. 배근상세 및 세장비를 변수로 하여, 2가지의 실규모 연결보를 제작 및 실험하였다. 전단벽을 연결하는 보의 실제 거동특성을 모사하기 위하여, 링크 조인트를 갖는 철골 구조물을 반력바닥에 설치하였다. 실험 결과, 연결보와 전단벽 접합부에서의 균열 및 철근이 항복되면서, 점차 연결보 중앙부로 손상이 진전되는 것으로 나타났다. 연결보는 FEMA 450-1의 설계변위에 대한 전단벽 층간변위 규정에 요구되는 변형능력을 충분히 갖는 것으로 나타났다. 그러나 고강도 철근으로 보강된 연결보의 상세설계를 위해서는, 다양한 세장비가 연결보의 구조거동에 미치는 영향에 관한 연구가 필요하다.

가변형 핑거 조인트를 가지는 신축이음장치의 구조 성능 실험 (An Experiment of Structural Performance of Expansion Joint with Rotation Finger)

  • 유성원
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권6호
    • /
    • pp.170-175
    • /
    • 2018
  • 내진 성능 학보를 위해서는 신축이음장치가 지진력에 대하여 적절한 변형이 발생하여 신축이음장치의 파괴를 방지하여야 하는데 최근에 국내에서 신축이음장치의 핑거부에 힌지를 설치하여 교축방향의 지진력에 대한 변위 저항성을 확보한 신제품이 개발되고 있다. 이에 본 논문에서는 가변형 핑거 조인트를 가지는 신축이음장치에 대하여 실물규모의 교축직각방향 하중에 대한 저항성을 실험적으로 평가하였다. 실험결과, 최대 수평변위는 기존 신축이음 실험체의 경우 약 21.1mm, 내진 신축이음 실험체의 경우 51.00mm로 나타났으며, 기존제품은 추가적으로 16.5mm의 솟음이 발생되었다. 기존 신축이음 실험체는 어느 정도의 교축직각 방향의 하중에 대하여 저항한 후, 핑거의 휨 및 전단 변형이 과도하게 발생되며 파단 현상이 발생할 가능성이 있을 것으로 추정된다. 반면에 내진 신축이음 실험체의 경우, 교축 직각방향의 하중에 대하여 하중에 대한 변형을 핑거의 힌지가 흡수하여 신축이음장치 및 상부구조에 응력을 발생시키지 않고 다만 하중 작용방향으로의 수평 변형만 발생시킬 것으로 예상된다.

금속 침출연구를 위한 전기화학적 미소수정진동자저울 기술 소개 (Introduction to Electrochemical Quartz Crystal Microbalance Technique for Leaching Study of Metals)

  • 김민석;정경우;이재천
    • 자원리싸이클링
    • /
    • 제29권1호
    • /
    • pp.25-34
    • /
    • 2020
  • 전기화학적 미소수정진동자저울은 전극표면에서 발생하는 나노그램 수준의 질량변화를 실시간 측정할 수 있는 장비이다. 역압전효과를 가진 수정진동자 양면에 형성된 금속전극에 교대로 전계를 가하면 진동자의 두께에 따라 특정 공진주파수를 나타낸다. 공진주파수는 전극표면에서 발생하는 질량변화에 반응하며, 전극표면의 금속이 용해될 때는 증가하고 석출될 때는 반대로 감소한다. 공진주파수와 질량변화의 상관관계는 Sauerbrey 식으로 나타내고 이를 이용하여 금속의 침출반응때 발생하는 질량변화를 실시간으로 측정할 수 있다. 특히 용해 후 침출액에서 침전, 휘발, 기타 화합물 형성 등 부반응으로 실험 후 발광분광분석이나 원자흡광분석 등이 용이하지 않은 금속의 침출 반응기구 및 속도 연구에 매우 효과적이다. 그러나 수정진동자의 공진주파수는 질량변화 외에도 용액의 점도, 수압, 온도, 스트레스, 그리고 표면거칠기 등에도 영향을 받으므로 실험 시 이들 영향에 대한 고려가 필요하다. 전기화학적 미소수정진동자저울의 응용 예로서 염소를 이용한 백금의 침출 시 용해속도를 실시간 측정하고 이로부터 활성화에너지를 구하는 일련의 과정을 소개하였다. 침출에 사용된 백금시료는 수정진동자 양면에 형성된 1000 Å두께의 백금전극 중 침출액에 노출된 한쪽 면을 활용하였으며, 전해생성된 염소를 염산 침출액에 주입하여 침출 시 용존 염소농도를 조절하였다. 실험결과로부터 염소에 의한 백금의 용해반응은 활성화에너지가 83.5 kJ/mol로 화학반응율속임을 확인하였다.

도심지 인접 산불의 불티 확산이 건축물 외장재와 지붕재에 미치는 영향에 관한 실험적 연구 (An Experimental Study on the Influence of the Spread of Firebrand on Building Exterior Materials and Roofing Materials in Urban Areas)

  • 민정기
    • 한국재난정보학회 논문집
    • /
    • 제17권3호
    • /
    • pp.617-626
    • /
    • 2021
  • 연구목적: 본 연구는 도심지 인접에서 발생하는 산불의 불티로 인한 건축물 외장재 및 지붕재의 화재확산 위험성 평가를 목적으로 한다. 연구방법: 이러한 연구목적을 달성하기 위해서 건축물의 외장재와 지붕재로 사용되는 건축자재를 선별하여 착화시간, 총 방출열량, 열방출률을 확인하고 산불 불티 비화 시스템을 구축하여 산불 불티로 인한 각각의 재료에 대한 화재 확산 가능성을 확인하였다. 연구결과: 콘칼로리미터 실험결과 지붕재는 철판이 외부에 노출된 외장재에 비해 복사열로 인한 착화시간이 비슷하거나 빨랐으며 외장재보다 높은 열방출률과 총 방출열량을 나타냈으며, 불티 비화 실험에서 외장재는 하부에 가연물이 착화함에 따라 영향을 받았으나 제한된 가연물의 양으로 쉽게 확산하지 않고 내부에서 탄화흔이 나타난 것을 확인할 수 있었으나 지붕재의 경우 사용 재료에 따라 불티로 인한 가연물 착화로 쉽게 녹고 주변으로의 확산에 기여하는 것을 확인할 수 있었다. 결론: 콘칼로리미터 실험 방법은 복사열로 건축자재의 연소 특성을 파악하는데 유용한 것으로 나타났으나 산불에서 불티로 인한 화재확산은 주변 가연물의 착화로 직접 화염에 영향을 받아 콘칼로리미터 방법과 직접적인 연관성을 찾는 것은 어려움이 있고 외장재에 비해 지붕재가 불티로 인한 화재 확산에 더 취약할 수 있는 것으로 판단된다.

중심합성계획법 기반 이중유전자알고리즘을 활용한 차량추종모형 정산방법론 개발 (Calibration of Car-Following Models Using a Dual Genetic Algorithm with Central Composite Design)

  • 배범준;임현섭;소재현
    • 한국ITS학회 논문지
    • /
    • 제18권2호
    • /
    • pp.29-43
    • /
    • 2019
  • 미시적 교통류 모형의 정산은 시뮬레이션 분석에 있어 매우 중요한 요소이다. 유전자 알고리즘은 교통류 모형의 정산에 널리 활용되어 왔으며, 일반적으로 이러한 최적화 문제에 있어 높은 효율성을 보이는 것으로 알려져 있다. 하지만 제한된 시간내에 신속한 의사결정을 위한 시뮬레이션 분석에 있어 유전자알고리즘의 모형 정산속도는 여전히 느리다. 이에 본 연구에서는 정산 효율 향상을 위해 중심합성계획법 기반의 이중유전자알고리즘을 활용한 차량추종모형 정산방법론을 개발하였다. 개발된 정산 방법론에서는 실험계획법 중 하나인 중심합성계획법과 유전자알고리즘을 결합하여 준최적해를 찾고, 이를 다시 유전자알고리즘의 초기 값으로 하여 모형 파라미터의 최적해를 찾는다. 개발된 방법을 활용하여 Gipps의 차량추종모형을 정산하였다. 선행연구에서 사용된 단일 유전자알고리즘을 활용한 방법과 비교한 결과, 본 연구에서 개발한 방법이 더 짧은 시간내에 최적해를 찾는 것으로 확인되었다. 개발된 방법론은 유전자알고리즘을 사용하는 다양한 교통분석에 활용될 수 있을 것으로 기대된다.

GPR 기반 콘크리트 슬래브 시공 두께 검측 기법 개발 (Development of Thickness Measurement Method From Concrete Slab Using Ground Penetrating Radar)

  • 이태민;강민주;최민서;정선응;최하진
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권3호
    • /
    • pp.39-47
    • /
    • 2022
  • 국내의 공동주택 보급률 증가에 따라 층간소음으로 인한 문제가 증가하고 있다. 이를 예방하기 위하여 바닥 충격음 차단 구조에 대한 수요가 높아지고 있으며 해당 구조에 대한 성능 인증이 이뤄지고 있지만 소음 차단 성능이 현장에서는 재현되지 않는다는 문제점이 있다. 해당 구조가 제 성능을 발휘하기 위해서는 일정 두께 이상의 마감 모르타르 타설이 필요하며, 해당 구조의 시공 적정성 판정을 위하여 GPR을 이용한 두께 측정 실험을 진행하였다. 본 연구에서 개발한 두께 측정 알고리즘은 측정된 데이터를 기반으로 상대유전율을 설정할 수 있어 정확한 두께 값을 측정할 수 있다. 네 종류의 바닥 충격음 차단 인증 구조에서 GPR 두께 측정 실험을 진행하였으며, GPR 데이터와 천공 측정 데이터 간 평균 오차는 1.95mm로 나타났다. 또한 마감재 유무가 측정값에 미치는 영향을 조사하기 위하여 총 3가지 종류의 마감재를 배치하고 실험을 진행으며, 평균 오차는 1.70mm로 나타났다. 추가적으로 장비의 샘플링 오차, 개발 알고리즘 변수, 천공 오차등을 종합적으로 고려하였을 때, GPR 계측 및 제안 알고리즘은 매우 높은 정확도로 슬래브 마감 모르타르의 두께 측정에 적용할 수 있음을 확인하였다.

구조적 공백과 협업필터링을 이용한 추천시스템 (Recommender Systems using Structural Hole and Collaborative Filtering)

  • 김민건;김경재
    • 지능정보연구
    • /
    • 제20권4호
    • /
    • pp.107-120
    • /
    • 2014
  • 본 연구에서는 사회연결망분석기법 중 하나인 구조적 공백 분석 결과를 이용하여 추천과정에 사용자의 정성적이고 감성적인 정보를 반영할 수 있는 협업필터링 기반의 추천시스템을 제안한다. 협업필터링은 추천기술 중 가장 많이 활용되고 있지만 전통적으로 확장성과 희박성 등의 문제점뿐 만 아니라 사용자-상품 매트릭스의 선호도만을 이용하여 추천을 함으로써 사용자의 정성적이고 감성적인 정보를 추천과정에 반영하지 못한다는 한계점이 있다. 본 연구에서 제안하는 추천시스템은 사회연결망분석에서 중심성 분석과 함께 연결망 내의 주요개체를 탐지할 수 있는 구조적 공백 분석을 이용하여 연결망 내의 대표 사용자들을 추출한 후 이들을 중심으로 군집을 형성한 후 각 군집색인 협업필터링을 수행하는 과정을 통해 전통적인 협업필터링에서 반영하지 못했던 정성적, 감성적 정보를 반영한다. 한편, 군집색인 협업필터링을 수행함으로써 추천의 효율성을 높일 수 있는 장점도 있다. 본 연구에서는 실제 사용자들의 상품에 대한 선호도 평가점수와 사용자들의 사회연결망 정보를 수집하여 실험을 수행하고 전통적인 협업필터링과 다양한 형태의 협업필터링과의 추천성과 비교를 통하여 제안하는 시스템의 유용성을 확인한다. 비교모형으로는 전통적인 협업필터링, 임의 군집색인 기반 협업필터링, k평균 군집색인 기반 협업필터링을 이용한 추천시스템이며, 실험 결과, 제안한 모형이 다른 비교모형에 비해 추천성과의 정확도가 가장 우수하였다. 추천성과의 차이에 대한 통계적 유의성 검정 결과, 제안 모형은 전통적인 협업필터링 기반의 추천시스템과는 통계적으로 유의한 성과 차이가 없었으나, 다른 두 모형에 대해서는 통계적으로 유의한 성과의 차이가 있는 것으로 나타났다.

기상청 동네예보의 영농활용도 증진을 위한 방안: 2. 강수량 분포 상세화 (Improving Usage of the Korea Meteorological Administration's Digital Forecasts in Agriculture: 2. Refining the Distribution of Precipitation Amount)

  • 김대준;윤진일
    • 한국농림기상학회지
    • /
    • 제15권3호
    • /
    • pp.171-177
    • /
    • 2013
  • 본 연구는 기상청에서 제공하는 강수 실황 혹은 예보로부터 농업부문에서 활용 가능한 수준의 상세한 강수분포도를 제작하기 위한 방안으로서, 레이더 반사강도를 KLAPS 5km 강수자료에 적용하여 1km 격자해상도로 상세화 하는 1단계와, 고해상도 DEM에 근거한 지표면 경사방향(지향면)에 따라 고도-강수량 회귀 계수를 달리하여 지형효과를 반영하는 2단계 등으로 이루어진 추정기법을 고안하였다. 이 기법의 현실세계 적용방법 모색 및 신뢰도 평가를 위해 경상남도 하동군 악양면을 실험 집수역으로 설정하고 2013년 1월부터 5월까지 총 19사례의 강수에 대해 기상청으로부터 KLAPS 강수자료를 수집하였다. 1단계로는 강수일의 24시간 적산 레이더에코 자료를 이용하여 1km 해상도로 자료의 규모를 축소하였다. 2단계로는 1km 격자점의 값을 가상의 관측자료로 삼아 270m 해상도에서 PRISM 기반의 지형효과를 반영한 강수량 분포도를 생성하였다. 실험 집수역에 13대의 무인기상관측장비를 다양한 고도 및 지형조건에서 설치하고, 추정된 강수분포도로부터 13개 지점에 해당하는 격자점의 자료를 추출하여 실측값과 비교하였다. 일 강수량 10mm 이상의 사례에서는 모든 관측지점에서 추정오차 감소효과가 인정되었으며, 특히 일강수량이 30mm 이상인 사례에서 평균 35% 이상의 오차감소효과를 확인하였다.

순차 연관 규칙을 이용한 개인화된 전시 부스 추천 방법 (Personalized Exhibition Booth Recommendation Methodology Using Sequential Association Rule)

  • 문현실;정민규;김재경;김혜경
    • 지능정보연구
    • /
    • 제16권4호
    • /
    • pp.195-211
    • /
    • 2010
  • 전시회는 전시업체가 새로운 상품이나 서비스를 관람객에게 알리기 위해 개최되는 것으로 효과적인 마케팅 수단으로 중요한 역할을 수행한다. 전시회를 방문하는 다양한 관람객의 니즈를 충족시키기 위하여 다양한 유비쿼터스 기술이 전시회에 응용되고 있지만 관람객이 사전에 요청한 정보만을 제공함으로 개별 관람객의 선호가 반영되지 않아 관람객의 니즈를 충족시키기에는 한계가 있다. 이러한 한계를 해결하기 위한 방법으로 개인의 선호에 부합하는 부스를 추천하는 추천 시스템의 이용이 가능하다. 추천시스템은 전시 환경에서 관람객의 선호를 추론하여 선호에 부합하는 방문 부스를 추천하여 관람객의 니즈를 충족시킬 수 있다. 그러나 추천 시스템 중 가장 성공적으로 평가 받는 기존의 협업 필터링은 관람객의 부스 방문 순서에 나타나는 선호를 반영하지 않아 동적으로 변화하는 선호를 가지는 관람객으로 구성된 전시 환경의 추천 시스템으로는 적합하지 않다. 따라서 본 연구에서는 관람객의 방문 순서를 고려하는 기법 중 순차 연관 규칙을 이용하여 관람객의 선호에 부합하는 부스를 추천하는 방법론을 제안하였다. 본 연구에서 제안한 방법론의 성과 측정을 위해 실제 전시회에서 획득한 데이터를 사용하여 기존의 협업 필터링과 비교한 결과 전체적으로 추천의 성과가 향상되어 향후 전시 환경에서의 부스 추천시스템에 적용하여 관람객의 니즈를 충족시킬 것으로 기대된다.

Perceptional Change of a New Product, DMB Phone

  • Kim, Ju-Young;Ko, Deok-Im
    • 마케팅과학연구
    • /
    • 제18권3호
    • /
    • pp.59-88
    • /
    • 2008
  • Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

  • PDF