• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.87-94
• /
• 2013

This study estimated the changes in delays and speeds of vehicles in exclusive bus lane and road when the High Occupancy Vehicles(HOV) use the median bus lane. Synchro simulation tool was used to optimize the traffic signal time on the network and VISSIM was applied to simulate various scenarios. Here, drivers behavior parameters in VISSIM was optimized using Simultaneous Perturbation Stochastic Approximation(SPSA) algorithm in order to represent real traffic condition. Based on the simulation results, the delay in Doan daero was decreased when the volume of HOV in current condition runs on the median bus lane, whereas delay in Doan dongro was increased in all scenarios. The changes in bus speed was not sharply decreased for both study sites, even though the number of HOV increased to 10%. Thus, it could be allowed that the HOV use the median bus lane in Doan dongro and Doan daero. Future research tasks include studying about changes in delay when the HOV use the curb bus lane.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.61-72
• /
• 2013

Next-generation ITS(Intelligent Transportation System) adopts WAVE(Wireless Access in Vehicular Environment) system which is capable of the bidirectional communication system in vehicular environments. u-Transportation system adopted WAVE communications system to show the optimal performance in terms of various services with regard to vehicle safety and traffic. In this paper, we introduce testbed of ubiquitous-Transportation system and its service. Then, we describe WAVE system for supporting next-generation ITS service. Also, we carried out tests in real road environments in order to verify communication functions of WAVE systems and its performance. We confirmed that our communication systems for supporting services meet the communication performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2702-2707
• /
• 2012

In the rapid growth of cities, road has heavy traffic and many buildings are under constructions. These kinds of environments make more difficulty for a person who is visually handicapped to walk comfortable. To alleviate the problem, we introduce Navigation System to help walking for Visually Impaired Person. It follows, service center give instant real time monitoring to visually impaired person for their convenient by this system. This Navigation System has GPS, Camera, Audio and Wi-Fi(wireless fidelity) available. It means that GPS location and Camera image information can be sent to service center by Wi-Fi network. To be specific, transmitted GPS location information enables service center to figure out the visually impaired person's whereabouts and mark the location on the map. By delivered Camera image information, service center monitors the visually impaired person's view. Also, they can offer live guidance to visually impaired person by equipped Audio with live talking. To sum up, Android based Portable Navigation System is a specialized navigation system that gives practical effect to realize more comfortable walking for visually impaired person.

• Journal of the Korean Geographical Society
• /
• v.45 no.6
• /
• pp.788-805
• /
• 2010

The present USN (Ubiquitous Sensor Networks) node deployment practices have many limitations in terms of positional connectivity. The aim of this research was to minimize a redundancy of USN route nodes, by integrating spatially weighted parameters such as visibility, proximity to cell center, road density, building density and cell overlapping ratio into a comprehensive GIS database. This spatially weighted approach made it possible to reduce the number of route nodes (11) required in the study site as compared to that of the grid network method (24). The field test for RSSI (Received Signal Strength Indicator) indicates that the spatially weighted deployment could comply with the quality assurance standard for node connectivity, and that reduced route nodes do not show a significant degree of signal fluctuation for different site conditions. This study demonstrated that the spatially weighted deployment can be used to minimize a redundancy of USN route nodes in a routine manner, and the quantitative evidence removing a redundancy of USN route nodes could be utilized as major tools to ensure the strong signal in the USN, that is frequently encountered in real applications.

• Spatial Information Research
• /
• v.7 no.2
• /
• pp.209-221
• /
• 1999

In this research, AVL-GIS(Automatic Vehicle Location System linked with Geographic Information System) system was developed using integration of core techniques of GIS engine written by Java language, GOS(Global Positioning System) and wireless telecommunication interfacing techniques. IDGPS(Inverted differential GPS) techniques was employed to estimate accurate position of mobile vehicle and to supervise their path from AVL-GLS control center system. Between mobile vehicle and AVL-GLS control center system which has spatial data analysis function, road network and rleate ddata base were connected wireless phone to communicate for position an dmessage in real time. The developed system from this research has more enhanced GIS functions rather than previous AVL oriented system which has MDT for message display and voice communication only. This system can support build-up application system such as fleet management like bus, taxi, truck, disaster and emergency and monitoring of transportation status for customer s order via web browser in filed of EC/CALS in low cost.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.6
• /
• pp.768-773
• /
• 2012

One of the main reasons for serious road accidents is driving while drowsy. For this reason, drowsiness detection and warning system for drivers has recently become a very important issue. Monitoring physiological signals provides the possibility of detecting features of drowsiness and fatigue of drivers. One of the effective signals is to measure electroencephalogram (EEG) signals and electrooculogram (EOG) signals. The aim of this study is to extract drowsiness-related features from a set of EEG signals and to classify the features into three states: alertness, drowsiness, sleepiness. This paper proposes a drowsiness detection system using Linear Predictive Coding (LPC) coefficients and Support Vector Machine (SVM). Samples of EEG data from each predefined state were used to train the SVM program by using the proposed feature extraction algorithms. The trained SVM program was tested on unclassified EEG data and subsequently reviewed according to manual classification. The classification rate of the proposed system is over 96.5% for only very small number of samples (250ms, 64 samples). Therefore, it can be applied to real driving incident situation that can occur for a split second.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.245-248
• /
• 2009

Recently, Many studies have been progressing to path-finding with dynamic information on the Terminal Based Navigation System(TBNS). However, the most of existing algorithms are based on $A{\ast}$ algorithm. Path-finding algorithms which use heuristic function may occur a problem of the increase of exploring cost in case of that there is no way determined by heuristic function or there are 2 way more which have almost same cost. In this paper, two abstract graph(AG) that are different method of construction, Homogeneous Node merging($AG^H$) and Connected Node Merging($AG^C$), are implemented. The abstract graph is a simple graph of real road network. The method of using the abstract graph is proposed for reducing dependency of heuristic and exploring cost. In result of evaluation of performance, $AG^C$ has better performance than $AG^H$ at construction cost but $AG^C$ has worse performance than $AG^H$ exploring cost.

• Journal of Korea Multimedia Society
• /
• v.22 no.1
• /
• pp.44-54
• /
• 2019

Recently, image-based object detection has made great progress with the introduction of Convolutional Neural Network (CNN). Many trials such as Region-based CNN, Fast R-CNN, and Faster R-CNN, have been proposed for achieving better performance in object detection. YOLO has showed the best performance under consideration of both accuracy and computational complexity. However, these data-driven detection methods including YOLO have the fundamental problem is that they can not guarantee the good performance without a large number of training database. In this paper, we propose a data sampling method using CycleGAN to solve this problem, which can convert styles while retaining the characteristics of a given input image. We will generate the insufficient data samples for training more robust object detection without efforts of collecting more database. We make extensive experimental results using the day-time and night-time road images and we validate the proposed method can improve the object detection accuracy of the night-time without training night-time object databases, because we converts the day-time training images into the synthesized night-time images and we train the detection model with the real day-time images and the synthesized night-time images.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.63-74
• /
• 2021

Location-based services (LBSs) are expected to process a large number of spatial queries, such as shortest path and k-nearest neighbor queries that arrive simultaneously at peak periods. Deploying more LBS servers to process these simultaneous spatial queries is a potential solution. However, this significantly increases service operating costs. Recently, batch processing solutions have been proposed to process a set of queries using shareable computation. In this study, we investigate the problem of batch processing moving k-nearest neighbor (MkNN) queries in dynamic spatial networks, where the travel time of each road segment changes frequently based on the traffic conditions. LBS servers based on one-query-at-a-time processing often fail to process simultaneous MkNN queries because of the significant number of redundant computations. We aim to improve the efficiency algorithmically by processing MkNN queries in batches and reusing sharable computations. Extensive evaluation using real-world roadmaps shows the superiority of our solution compared with state-of-the-art methods.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.29-35
• /
• 2021

License plate recognition plays a key role in intelligent transportation systems. Therefore, it is a very important process to efficiently detect the number and character areas. In this paper, we propose a method to effectively detect license plate number area by applying deep learning and semantic image segmentation algorithm. The proposed method is an algorithm that detects number and text areas directly from the license plate without preprocessing such as pixel projection. The license plate image was acquired from a fixed camera installed on the road, and was used in various real situations taking into account both weather and lighting changes. The input images was normalized to reduce the color change, and the deep learning neural networks used in the experiment were Vgg16, Vgg19, ResNet18, and ResNet50. To examine the performance of the proposed method, we experimented with 500 license plate images. 300 sheets were used for learning and 200 sheets were used for testing. As a result of computer simulation, it was the best when using ResNet50, and 95.77% accuracy was obtained.