• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.2
• /
• pp.281-287
• /
• 2013

PURPOSE: The study was designed to investigate the effects of visual, auditory, and visuoauditory cues on simple Serial Task Performance in heaithy adults. METHODS: Sixty-three right-handed heaithy adults without history of neurological dysfunction were participated. A modified version of the Serial Reaction Time Task (SRTT) using five blocks of perceptual motor sequences was administered. The blocked paradigm consisted of the five blocks with randomly repeated 8 digit sequences with 5 repetition. Three types of sensory cue were employed: visual cue, auditory cue and visuoauditory cue. All subjects were assigned to press the matched botton as quickly and accurately as possible, when one of 8 stimulations was presented(one, two, three, four, five, six, seven, eight). The reaction time, accuracy, and P300 latency were measured during serial task performance. The mean reaction time(ms), accuracy(%), and P300 latency(ms) were compared between three types of cue using ANOVA. RESULTS: The reaction time to auditory cue was significantly longer than visual and visuoauditory cues(p<.001). And accuracy to auditory cue was significantly lower than visual and visuoauditory cues(p<.001). All P300 latency(at Fz, Cz, Pz) were significantly longer than to visual and visuoauditory cues(p<.05). CONCLUSION: It is suggested that type of cues influence in choice reaction. These data may helpful in designing not only effective motor learning training programs for healthy persons but also reeducation programs for patients with neurological dysfunction.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.65-70
• /
• 2012

Glycidyl methacrylate (GMA) was used to introduce epoxy groups on the surface of polypropylene (PP) plate, used as a substrate, through plasma-induced graft copolymerization. Emulsion polymerization was applied for graft copolymerization of GMA and was compared with conventional solution polymerization to confirm its effect. Plasma treatment conditions under one atmospheric pressure were fixed as follows; the RF power of 200 W, the treatment time of 30 sec, the Ar gas flow rate of 6 LPM, and the exposure time of treated PP samples in air of 5 min. For graft-copolymerization, GMA concentration, reaction temperature, and reaction time was optimized to maximize the grafting degree of GMA. The maximum grafting degree of GMA was obtained at the condition of 12%-GMA concentration, $90^{\circ}C$ reaction temperature, and 5 hr-reaction time. Analysis results supported that the emulsion polymerization was more effective than the solution polymerization for grafting more GMAs on the surface of PP plate under the same reaction conditions.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.220-225
• /
• 2021

Objective: The purpose of this study was to investigate the effect of levels of education on ground reaction force and center of pressure parameters during chest compression resuscitation. Method: Twenty male university students were divided into two groups; certified group (CG, n=10) and non-certified group (NCG, n=10). Two force plates were used to measure ground reaction force and center of pressure parameters during 30 times (three trials) chest compression resuscitation. Independent t-tests were used to compare ground reaction force and center of pressure parameters between two groups. An alpha level of 0.05 was used in all tests. Results: All chest-compression time parameters (total time, 1 systolic time, and diastolic time) in CG were significantly shorter than those in NCG (p<.05). Fy of the diastolic and Fz of the systolic in CG revealed significantly the larger GRF values and Fy of the systolic in CG showed significantly the smaller GRF value (p<.05). The standard deviation of Fz of the systolic and diastolic within the subject during 30 times chest-compression resuscitation revealed significantly the smaller values in CG (p<.05). Conclusion: First, CG performed chest compressions efficiently at an appropriate rate compared to NCG. Second, CG showed lower Fx and Fy values in both the mediolateral and anteroposterior axes compared to NCG, which reduced unnecessary chest-compression force consumption and minimized the movement in patients with cardiac arrest. Third, CG showed high Fz value of the systolic and low Fz value of the diastolic. Based on this, chest compression resuscitation was performed to increase the survival rate of cardiac arrest patients.

• Journal of Environmental Science International
• /
• v.30 no.1
• /
• pp.69-76
• /
• 2021

The purposes of this study were to evaluate the removal characteristics of COD, Ni, and P and to derive appropriate operating conditions for the plating wastewater according to NaOCl reaction time and pH operating conditions in the BPC unit process during the plating wastewater treatment process. As a results of evaluating the removal characteristics for raw wastewater by each BPC unit process, the removal efficiencies of COD, Ni and P in BPC 1-1 unit process were 72.8%, 99.1%, and 100.0%. Therefore, the proper reaction time of NaOCl was derived as 21.1 minutes. In order to maintain the +800 mV ORP and the reaction time of 20 minutes, the temporary injection and continuous injection of NaOCl in the BPC unit process were 13.7 mL and 18.7 mL, respectively. It was found that the temporary injection method of NaOCl reduced the chemical cost by 36.5% compared to the continuous injection method. Also, Ni showed the highest removal efficiency of 97.8% at pH 10.5. On the other hand, P showed a removal efficiency of 57.4% at pH 10.0.

• The Journal of Korean Physical Therapy
• /
• v.33 no.6
• /
• pp.265-271
• /
• 2021

Purpose: We aimed to analyze the reliability of the test for choice stepping reaction time (CSRT) under an unstable surface and determine whether there were differences in CSRT between support surface conditions (stable vs. unstable conditions) and between age groups (young adults vs. community-dwelling older adults). Methods: Twenty healthy community-dwelling older adults and twenty young adults performed the stepping task under an unstable condition over two visits. The mean of the two trials measured for each visit was used for the analysis. The test-retest reliability was analyzed using intra-class correlation coefficient (ICC) with a 95% confidence interval, standard error of measurement (SEM), and minimal detectable change (MDC). Differences in CSRT between support surface conditions and age groups were analyzed using the independent t-test with Bonferroni correction. Results: Excellent consistency was observed for ICC >0.90 in both groups. Moreover, the SEM and MDC values of the CSRT in older and young adults were 0.03 and 0.09 and 0.01 and 0.04, respectively. There was a significant difference in the CSRT between the age groups under stable (p<0.001) and unstable conditions (p<0.001). Conclusion: The findings demonstrated that the test for CSRT under an unstable condition had reliable results in both groups. Although older adults demonstrated longer reaction times than younger adults in all surface conditions, increasing the balance control demand by implementing a choice stepping task concomitant with a balance task had no influence on the reaction time in both age groups.

• Journal of the Ergonomics Society of Korea
• /
• v.13 no.1
• /
• pp.27-35
• /
• 1994

Automation and mechanization of work make people put the machine into operation and control the state of operation. In the process of those works they are apt to have accidents caused by their carelessness. To reduce such accidents, we can practice "TOUCH '||'&'||' CALL", which is to indicate and ascertain the dangerous parts at every process before performing tasks. The objectives of this study are to examine the effects of S-R compatibility and to show quantitatively the efficiency of TOUCH '||'&'||' CALL. The results show that: 1. Reaction time in case of indicating with fingers and shouting is slightly longer (0.138sec. .approx. 0.279sec. ) than that of responding only visually. However, the error rate decreases by 1/3.3 .approx. 1/4.2 times. Frome this, it is considered to verify quantitative estimation on multiple feedback of TOUCH '||'&'||' CALL. 2. In the stimulus-response relation aspect, numeric numeric stimulus-numeric response shows lower error rate (0.033% .approx. 0.133%) than any other stimulus-response relation, ahd shorter reaction time is proven ( 0.556sec. .approx. 0.835sec. ). These data suggest that having the order of stimulus-response arranged in accordance with the experimental knowledges and conceptional compatibility can bring down the error rate considerably.

• The Journal of Korean Physical Therapy
• /
• v.17 no.2
• /
• pp.11-22
• /
• 2005

Purpose: The purpose of this study was to investigate the effects of aquatic health exercise program for the old. Methods: 20 healthy female with an average age of 71years($71{\pm}4.2$), were participated in this study. The aquatic health exercise program that include warm-up, stretching, strengthening exercise, WATSU and cool-down was performed in the pool two times a week for eight weeks(40min per one session). Body composition, strength of the both knee flexors and extensors, balance ability(sway area and path), whole body reaction time and flexibility(forward reaching test in long sitting) were measured before and after exercise. The data was analyzed with paired t-test to determine significant differences of all suggested factors between pre and post-exercise by make use of the SPSS(ver 10.0) package program. Results: The strength of the both knee flexors and extensors were increased significantly(right knee; p<0.01, left knee; p<0.05). Anteroposterior sway area (p<0.01), and sway path (p<0.001) of both leg were reduced significantly with eyes closed and opened. Whole body reaction time by optical stimulation was increased significantly (p<0.01) but whole body reaction time by auditory stimulation was no significant difference. The flexibility was increased significantly (p<0.01). Conclusion: Aquatic health exercise program can improve muscle strength, balance, whole body reaction, and flexibility.

• Microbiology and Biotechnology Letters
• /
• v.19 no.4
• /
• pp.377-382
• /
• 1991

Reef tallow was hydrolyzed with lipase under the conditions of liquid state and solid state. Lipase OF 360 was used for that purpose, and the lipase had the maximum activity when the olive oil was used as a substrate at pH 6 and $37^{\circ}C$. Beef tallow was dispersed by an agitator to perform a liquid enzymatic reaction. Water content, reaction temperature, and enzyme amount were varied as parameters affecting hydrolysis percentage. Ninety three percents of tallow were hydrolyzed at the following conditions: water content 80% w/w, temperature $37^{\circ}C$, and enzyme amount 200 unitlg tallow. In order to conduct a solid phase enzymatic reaction, sonication was employed for pretreating tallow with the enzyme solution. Molten tallow was sonified with the enzyme solution, and solidified by lowering temperature. And then hydrolysis reaction proceeded at $30^{\circ}C$. Sonication intensity and time were varied to control hydrolysis percentage. Optimum values of the intensity and the time were found to exist since the hydrolysis percentage did not increase further according to the increases of the intensity and the time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.2
• /
• pp.121-126
• /
• 1990

Internal mass transfer during osmotic concentration of apples in sugar solutions was exami-ned as a function of concentration temperature and immersion time of those solutions using moisture loss sugar gain molality and rate parameter. Influence of osmotic concentration processes on browning reaction was also evaluated compared to control In creasin the concen-tration and temperature of sugar solutions increased moistrue loss sugar gain molality and rate parameter. Water loss was rapid early in the process and then levelled off, The same phenomena were occurred on sugar gain only in higher concentration(60$^{\circ}$ brix). IN lower concentration (30$^{\circ}$brix) sugar gain was gradually increased during whole process. Moisture loss during osmotic concentration using a sugar solution(60$^{\circ}$ brix 6$0^{\circ}C$) with 180min immer-sion time was 45.79% Effect of osmotic concentration befor air dried to 4% M.C(wet basis) on browning reaction was significant. Minimum browning reaction during air drying was carried out using a pretreatment such as osmotic concentration in sugar solution(60$^{\circ}$brix 45$^{\circ}C$) with 150min immersion time(O.D=0.01) compared to control(O.D=0.17)

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.65-71
• /
• 2011

In modem society, car are the most important transportation. Thereby, car accidents has been increasing steadily. The driver is the biggest factor of car accident. Therefor, various studies about driver (reaction time, mentality, physiological signal, age, pattern of drive) are underway. In this paper, we design a embedded system for measuring the reaction time by driving skill. The proposed system is composed of measuring brake module, OBD-2 scanner and bluetooth transmission module. Also, we implement GUI program to analyze experiment result and database to store results. Though our proposed system, we can analyze driving skill.