• 제목/요약/키워드: reaction degree

검색결과 1,092건 처리시간 0.028초

스프레더용 충격흡수기의 시스템 변화에 따른 최적설계 (The Optimum Design of Impact Absorbing System for Spreader in System Variations)

  • 홍도관;김동영;한동섭;안찬우;한근조
    • 한국항해항만학회지
    • /
    • 제26권3호
    • /
    • pp.311-316
    • /
    • 2002
  • 본 연구에서는 항만하역장비인 스프레더용 충격흡수기의 개발을 위해 스프링과 오일댐퍼로 구성된 세 가지 형태의 모델에 대한 동적응답을 유한요소해석에 의해 수행하였다. 또한, 세 가지 모델의 충격흡수기에서 피스톤의 제한된 행정을 정적변수로 하고 목적함수인 충격에 대한 반력이 최소가 되도록 최적설계를 수행하였다. 본 연구의 결과로는 직렬식 2자유도계 모델의 반력이 가장 작게 나타났으며 그 다음으로는 1자유도계 모델, 병렬식 2자유도계 모델의 순으로 나타났다. 스프링상수와 감쇠계수의 변화가 반력에 미치는 영향을 확인하였으며, 최적설계 결과 각 모델에 대한 반력이 최소가 되는 스프링상수와 감쇠계수를 구하였다.

단백질에 대한 그라프트 공중합 (제1보). Cerium (IV) 이온에 의한 비닐 단위체의 견섬유에 대한 그라프트 공중합 (Graft Copolymerization to Proteins (I). Cerium (IV) Ion-Initiated Graft Copolymerization of Vinyl Monomers to Silk Fibroins)

  • 조의환;안광덕
    • 대한화학회지
    • /
    • 제20권4호
    • /
    • pp.299-308
    • /
    • 1976
  • 단백질 섬유인 견섬유에 ceric ammonium nitrate를 촉매로 사용하여 acrylamide 또는 acrylonitrile을 그라프트공중합 하였다. 공중합의 표준반응조건은 세륨염 0.025 M, acryamide 0.5 M, 초산 25%, 온도 30$^{\circ}C$, 반응시간 3시간으로 하였으며 견섬유의 욕비(bath ratio)는 1:200으로 하였다. 이상의 반응조건에서 세륨염의 농도가 0.01 M 일 때와 7% 초산수용액일 때에 그라프트율이 최대로 되었다. Acrylonitrile을 단위체로 사용하면 질산용액에서의 그라프트율이 초산수용액에서 보다 높았지만, acrylamide 사용시와는 달리 그라프트율은 현저히 낮았다. 이밖에 그라프트된 견섬유의 Lowe시약(동-글리세린 수용액)에 대한 용해도, 적외선 분석 및 분자량을 조사하고 호모 중합체의 생성에 대하여 검토 하였다.

  • PDF

화학 반응열을 고려한 탄소 섬유 복합재 온도와 경화도 예측 (Prediction of Temperature and Degree of Cure of Carbon Fiber Composites Considering Thermal Chemical Reaction)

  • 유재우;김위대
    • Composites Research
    • /
    • 제36권5호
    • /
    • pp.315-320
    • /
    • 2023
  • 오토클레이브를 사용하는 열경화성 탄소 섬유 복합재 성형 공정에서는 설정한 온도 사이클에 따라 내부 온도가 변화한다. 이 온도 변화에 따라 복합재 수지가 경화되며 성형이 진행된다. 이러한 과정에서 수지의 화학 반응으로 열이 발생하며, 이로 인해 오토클레이브 내부 온도와 복합재의 온도가 다를 수 있는 상황이 나타난다. 이전 연구에서는 복합재와 오토클레이브의 온도를 동일하게 가정하고, 성형 후에 발생하는 잔류 응력과 열 변형을 예측하였다. 그러나 잔류 응력과 열 변형은 복합재 온도와 경화도에 따라 영향을 받는 요소이기 때문에, 본 연구는 수지의 화학 반응열을 고려하여 정확한 온도와 경화도 변화를 계산하는 열화학 모델 해석 기법을 검증하였다. 또한, 이 모델이 다른 두께에서도 이와 같은 경향성을 나타내는지 확인하기 위해 두께별 케이스 연구를 하였다.

발암성 분자와 식품보존제의 광화학 및 열적 반응메카니즘 (Photochemical and Thermal Reaction Mechanism for the Reaction of Carcinogenic Molecules and Food Reservatives)

  • 김민식;채기수;김갑순;성대동
    • 한국식품영양학회지
    • /
    • 제11권3호
    • /
    • pp.267-271
    • /
    • 1998
  • Seyferth 시약인 phenyl(tribromomethyl) mercury 및 diazomethane의 식품보존제인 dehydroacetic acid 및 coumarin과의 발암성과 그 반응기작을 분자 구조적 관점에서 알아보기 위하여 UV/vis 조건과 laser flash photolysis 시켰을 때의 결과는 다음과 같다. 1. Diazomethane과 Phenyl(tribromomethyl) mercury와 dehydroacetic acid와 diazomethane과의 반응은 광화학적 분해 반응에서 생성된 : CBr2와 : CH2 카르벤 중간체의 이탈기 효과에 따라 발암성이 크게 나타났다. 2. laser flash photolysis 상에서 반응시켰을 때 식품보존제의 발암성이 UV/vis 상에서의 photolysis 때보다 크게 나타났다.

  • PDF

Mechanism for the Reaction of Substututed Phenacyl Arenesulfonates with Substituted Pyridines under High Pressures

  • 박헌영;손기주;정덕영;여수동
    • Bulletin of the Korean Chemical Society
    • /
    • 제18권11호
    • /
    • pp.1179-1182
    • /
    • 1997
  • The rates for the reaction of (Z)-phenacyl (X)-benzenesulfonates with (Y)-pyridines in acetone were measured by an electrical conductivity method at 1-2000 bars and 45 ℃. The magnitudes of the Hammett reaction constants, ρX, ρY and ρZ, represent the degree of Nu-C bond formation and that of C-L bond breaking. The magnitude of correlation interaction term ρij can be used to determine the structure of the transition state (TS) for the SN reaction. As the pressure is increased, the Hammett reaction constants, ρX, |ρY| and ρZ are increased, but correlation interaction coefficient, |ρXZ| and ρYZ, are decreased. The results indicate that the reaction of (Z)-phenacyl (X)-benzenesulfonates with (Y)-pyridines probably moves from an associative SN2 to late-type SN2 mechanism by increasing pressure.

Caramel형 갈색화 반응속도에 관한 연구 (A study on the reaction rate of caramel type browning reaction)

  • 신민자;안명수
    • 한국식품조리과학회지
    • /
    • 제15권4호
    • /
    • pp.363-369
    • /
    • 1999
  • The study was carried out to compare the reaction rate of caramel type browning reaction of xylose(XY), glocose(GL), sucrose(SU), glucose+citric acid(GLCA), glucose+sodiumcitrats(GLSC), glucose+glycine(GLGC) heated at 60, 80, 100, 120 and 140$^{\circ}C$ for 24 hours, respectively. 1. The color intensity (absorbance at 490 nm) of the browning reaction mixtures tends to increase as the browning reaction time gets longer and the browning of reaction temperature gets higher. But the degree of the intensity of SU and GLCA changes very little. 2. The reaction rate constant (K) was increased rapidly above 120$^{\circ}C$ and appeared maximum at 140$^{\circ}C$, especially GLGC (140.25) was the highest. The activation energy (Ea) of sugars. XY had the highest value (124.36 J/mol), while SU the lowest(104.68 J/mol). Mixtures of GLGC was shown to have higher activation energy (144.94 J/mol) than the sugar alone and Q$\_$10/ values of GLGC were 1.68-2.85. 3. The residual amount of reactants such as xylose, glucose, sucrose, citric acid, sodium citrate and glycine in each browning mixture were decreased upon the browning reaction temperature increasing. In the GLCA, GLSC and GLGC browning mixtures, respectively, the residual amounts of glucose were less than those with amino acid, organic acid and their salt.

  • PDF

Effects of Protein Functionality on Myofibril Protein-Saccharide Graft Reaction

  • Kim, Tae-Kyung;Yong, Hae In;Cha, Ji Yoon;Kim, Yun Jeong;Jung, Samooel;Choi, Yun-Sang
    • 한국축산식품학회지
    • /
    • 제42권5호
    • /
    • pp.849-860
    • /
    • 2022
  • The myofibril protein (MP) isolate-saccharide graft reactions was prepared using the Maillard reaction with saccharides. The effects of various saccharides on protein functionality and quality of the Maillard reaction were investigated and compared with those of MP. The grafting degree of the MP isolate-saccharide graft reaction was significantly higher in the reducing sugar-treated groups (lactose, glucose, fructose, and palatinose). The browning intensity of the MP isolate-saccharide graft reaction with fructose, sucrose, and erythitol was higher than that observed in the control reaction (p<0.05). MP that reacted with reducing sugars (glucose, fructose, palatinose, and lactose) had fainter bands than MP that reacted with non-reducing sugars (sucrose, erythitol, trehalose, sorbitol, and xylitol). MPs conjugated with glucose exhibited higher protein solubility. The palatinose and lactose treatments were maximum in water binding capacity, though no significant difference in oil binding capacity among the saccharide treatments was observed. The emulsion stability of the MP isolate-saccharide graft reaction with palatinose and erythitol was higher than that of the control reaction. Therefore, reducing sugars have good protein functionality in the MP isolate-saccharides graft reaction.

HTPB 바인더가 추진제에 미치는 영향 (Effect of HTPB Binder on Propellant)

  • 김정은;류태하;홍명표;이형진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.504-507
    • /
    • 2017
  • 추진제의 주 바인더로 사용하고 있는 폴리부타디엔 계열인 HTPB(Hydroxyl Terminated Polybutadiene)는 합성 뱃취에 따라 바인더 및 추진제의 경화 속도에 영향을 미치는 현상을 보였다. 이에 각기 다른 뱃취에서 합성된 HTPB의 바인더 특성 분석을 통해 추진제에 적용하여 경화반응 속도 및 기계적 특성을 확인하였다. 최종적으로 이러한 추진제의 경화 반응속도가 추진제 물성에 영향을 미치며, 우수한 물성의 추진제를 제조하기 위해서는 적절한 수준의 바인더의 경화 반응이 필요한 것으로 분석되었다.

  • PDF

High Catalytic Activity and Recyclability of Graphene Oxide Based Palladium Nanocomposites in Sonogashira Reaction

  • Kim, Bo Hyun;Park, Joon B.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.139.1-139.1
    • /
    • 2013
  • Graphene and graphene oxide (GO) have been modified with palladium nanoparticles (Pd NPs) to develop high performance catalysts for the Sonogashira cross coupling reaction. To understand catalytic performance of Pd NPs on graphene (Pd/G) and Pd NPs on GO (Pd/GO), we monitored their morphological and electronic structural changes before/after Sonogashira reaction using FT-IR, XRD, XPS, and XAFS. Here, we demonstrate that both Pd/G and Pd/GO show high catalytic efficiency toward the Sonogashira reaction, but only Pd/GO revealed excellent recyclability. The remarkable catalytic efficiency of both catalysts is attributed to the high degree of the Pd NP dispersions on supports and thus smaller Pd NPs can provide highly reactive low coordinated Pd atoms. However, we attributed the excellent recyclability of Pd/GO to the presence of oxygen functionalities on GO, which can provide nucleation sites for the detached Pd atoms during the Sonogashira reaction and prevent agglomeration of the Pd NPs since the oxygen functional groups are very reactive to mobile Pd adatoms.

  • PDF

The distribution of fatty acids in the position of glycerides hydrolyzed from fish oil by lipase

  • Kim, Yong-Min;Hu, Hong-Bo;Hur, Byung-Ki
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 춘계학술발표대회
    • /
    • pp.505-508
    • /
    • 2000
  • In order to determine the position and the content of fatty acids attached to glycerides and the migration degree of fatty acids in the migration reaction, hydrolysis of fish oil was carried out with lipolase-100T derived from Aspergillus oryzae. The content of fatty acids in the glyceride mixture was analyzed and compared with that of fish oil. The amounts of fatty acid in 2-position and the migration degree of the fatty acid in 2,3-DG (diglyceride) and 2-MG (monoglyceride) were calculated. The results showed that approximately 95% (w/w) of DHA (docosahexaenoic acid) and 65% of EPA (eicosapentaenoic acid) was attached to the 2-position of glycerides in the fish oil. Approximately 87% (w/w) of DHA and 75% of EPA remained in 2,3-DG and 88% of DHA and 65% of EPA in 2-MG were not involved in the migration reaction.

  • PDF