• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.258-265
• /
• 2023

After application of veterinary antibiotics, they may be partially metabolized before they are excreted by feces or urine either as unaltered form or as metabolites. Residual antibiotics enter the adjacent agricultural environments by spraying manure-based compost and liquid fertilizer on farmlands and lead to secondary pollution. The objective of this study was to compare the residual concentrations of 6 veterinary antibiotics by different production stages of liquid fertilizer from livestock manure recycling facilities. The relationship between concentration change of the residual antibiotics and the amount of liquid fertilizer component was also assessed. Pre-treatment showed the recovery of 63.4-106.7% at ppb level and the limit of quantification of 0.009-0.037 ㎍/L.As the result of analyzing the relationship between the residual concentrations of antibiotics and the amount of N component in liquid fertilizer by different production stages, the residual concentrations of antibiotics and N tended to decrease as the stabilization period elapsed during the liquid fertilization process. Average concentrations of sulfamethazine in raw materials, middle and final products of liquid fertilizer were 40.85, 26.17, 3.54 ㎍/L, respectively. Those of chlortetracycline decreased from 2.32 to 1.25 ㎍/L. The other 4 antibiotics also showed a decreasing trend by different production stages of liquid fertilizer. The amount of liquid fertilizer component N decreased from 0.21 to 0.096% by production stages of liquid fertilizer. It is considered that the correlation between residual antibiotic concentrations and N content can be applied as basic data for setting antibiotic reduction indicators.

• Journal of Radiation Industry
• /
• v.17 no.2
• /
• pp.151-160
• /
• 2023

The International Atomic Energy Agency (IAEA) proposes 11 industries that handle Naturally Occurring Radioactive Material (NORM) that are considered to need management. A water treatment facility is one of the above industries that takes in groundwater and produces drinking water through a water treatment process. Groundwater can accumulate natural radionuclides such as uranium and thorium in raw water by contacting rocks or soil containing natural radionuclides. Therefore, there is a possibility that workers in water treatment facilities will be exposed due to the accumulation of natural radionuclides in the water treatment process. The goal of this study is to evaluate the external radiation dose according to the working type of workers in water treatment facilities. In order to achieve the above goal, the study was conducted by dividing it into 1) analysis of the exposure environment, 2) measurement of the external radiation dose rate 3) evaluation of the external radiation dose. In the stage of analyzing the exposure environment, major processes that are expected to occur significantly were derived. In the measurement stage of the external radiation dose rate, a map of the external radiation dose rate was prepared by measuring the spatial radiation dose rate in major processes. Through this, detailed measurement points were selected considering the movement of workers. In the external radiation dose evaluation stage, the external radiation dose was evaluated based on the previously derived external radiation dose rate and working time. As a result of measuring the external radiation dose rate at the detailed points of water treatment facilities A to C, it was 1.90×10^-1 to 3.75×10⁰ μSv h^-1, and the external radiation dose was analyzed as 3.27×10^-3 to 9.85×10^-2 mSv y^-1. The maximum external radiation dose appeared during the disinfection and cleaning of activated carbon at facility B, and it is judged that natural radionuclides were concentrated in activated carbon. It was found that the external radiation dose of workers in the water treatment facility was less than 1mSv y^-1, which is about 10% of the dose limit for the public. As a result of this study, it was found that the radiological effect of external radiation dose of domestic water treatment facility workers was insignificant. The results are expected to contribute as background data to present optimized safety management measures for domestic NORM industries in the future.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.4
• /
• pp.365-384
• /
• 2024

The development of scanning technology is accelerating for safer and more efficient automated inspection than human-based inspection. Research on automatically detecting facility damage from images collected using computer vision technology is also increasing. The pixel size, quality, and quantity of an image can affect the performance of deep learning or image processing for automatic damage detection. This study is a basic to acquire high-quality raw image data and camera performance of a mobile tunnel scanning system for automatic detection of damage based on deep learning, and proposes a method to quantitatively evaluate image quality. A test chart was attached to a panel device capable of simulating a moving speed of 40 km/h, and an indoor test was performed using the international standard ISO 12233 method. Existing image quality evaluation methods were applied to evaluate the quality of images obtained in indoor experiments. It was determined that the shutter speed of the camera is closely related to the motion blur that occurs in the image. Modulation transfer function (MTF), one of the image quality evaluation method, can objectively evaluate image quality and was judged to be consistent with visual observation.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.3
• /
• pp.169-190
• /
• 2023

Uzbekistan, one of the top five cotton-producing countries in the world, primarily focuses its textile and fashion industry on raw cotton exports and the sewing industry. For Uzbekistan to achieve high added value, it is essential for the textile and fashion industry, which is currently at the CMT(cut, make, and trim) stage, to upgrade to OEM (original equipment manufacturing), ODM (original design manufacturing), and OBM (original brand manufacturing). South Korea recognizes Uzbekistan as a potential manufacturing base and trading partner and has invested Official Development Assistance (ODA) funds for the development of Uzbekistan's textiles and apparel sector. This study aims to evaluate Uzbekistan's fashion higher education in the context of global competitiveness and measure the need and prospects for education ODA from the Korean government in this field. Comprehensive investigations, including surveys of academics, industry experts, and government officials, in-depth interviews, and focus group interviews, were conducted to understand Uzbekistan's current fashion education environment. According to the research results, despite the textile and fashion sectors playing a pivotal role in the Uzbek economy, there is room for improvement in the curricula and teaching and learning methods of the fashion higher education programs. This study holds significance as foundational data for establishing education ODA strategies.

• Journal of Internet of Things and Convergence
• /
• v.10 no.3
• /
• pp.57-64
• /
• 2024

In this paper, we propose a Line-of-Sight (LoS)/Non-Line-of-Sight (NLoS) identification- based Human Activity Recognition (HAR) system using Channel State Information (CSI) to improve the accuracy of HAR, which dynamically changes depending on the reception environment. to consider the reception environment of HAR system, the proposed system includes three operational phases: Preprocessing phase, Classification phase, and Activity recognition phase. In the preprocessing phase, amplitude is extracted from CSI raw data, and noise in the extracted amplitude is removed. In the Classification phase, the reception environment is categorized into LoS and NLoS. Then, based on the categorized reception environment, the HAR model is determined based on the result of the reception environment categorization. Finally, in the activity recognition phase, human actions are classified into sitting, walking, standing, and absent using the determined HAR model. To demonstrate the superiority of the proposed system, an experimental implementation was performed and the accuracy of the proposed system was compared with that of the existing HAR system. The results showed that the proposed system achieved 16.25% higher accuracy than the existing system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.479-488
• /
• 2018

This study was conducted to investigate factors affecting low body weight of solitary elderly people by grasping the illness and health behavior of elderly living alone. Using the raw data of the community health survey from 2014, the data of 922 elderly living alone who are 65 years or older were used for the final analysis. Data were analyzed by technical analysis statistics, The Rao Scott $x^2$ test, and logistic regression analysis using the composite analysis module of the SPSS/WIN 22.0 program. The results of this study showed that elderly living alone had a high percentage of chronic diseases as well as poor health behaviors such as smoking, drinking, lack of exercise, poor eating habits, difficulties in dentistry due to dentures, and poor subjective health status. Result of logistic regression analysis the risk probability of low-weight due to gender of the elderly living alone is as follows. Risk of low body weight because of smoking was 3.004 times among occasional smokers in women and the elderly, while risk of low body weight due to walking amount is less than 3 days the possibility that the person walking is low is 1.420 times significantly higher. When feeling subjective stress, the possibility of low body weight was 2.220 times greater for male elderly and 1.282 times for female elderly. The probability of low body weight for a person with a poor subjective health level was 3.633 times for male elderly and 1.590 times for female elderly. Based on the results of this study, it is necessary to establish appropriate nursing intervention and management strategies to improve health behavior of low body weight elderly living alone. It is also necessary to conduct additional studies considering various variables such as physical, psychological, and social characteristics of low-weight elderly individuals.

• Water for future
• /
• v.28 no.6
• /
• pp.147-158
• /
• 1995

The purpose of this study is to establish a method of estimating the daily urban water demand using statistical model. This method will be used for the development of the efficient management and operation of the water supply facilities. The data used were the daily urban water use, the population, the year lapse and the weather conditions such as temperature, precipitation, relative humidity, etc. Kwangju city was selected for the case study area. The raw data used in this study were rearranged either by month or by season for the purpose of analysis, and the statistical analysis was applied to the data to obtain the regression model. As a result, the multiple linear regression model was developed to estimate the daily urban water use based on the seather condition. The regression constant and the model coefficients were determined for each month of a year. The accuracy of the model was within 3% of average error and within 10% of maximum error. The developed model was found to be useful to the practical operation and management of the water supply facilities.

• The Journal of Korean Medicine
• /
• v.17 no.2 s.32
• /
• pp.337-393
• /
• 1996

The purpose of this study is to evaluate and standardize the four scales of Questionnaire for the Sasang Constitution Classification 　II (QSCCII). QSCCII is newly prepared by statistical item analysis and is designed to examine its diagnostic discriminability. QSCCII is administered to 1366 random informants. From the survey, we could get the data for the standardization. The criteria of standardization are based on the data from 265 informants who are examined by professionals. Collectted data are analyzed by internal consistency, variation analysis(ANOVA), Duncan test and discrimination analysis of SPSS PC+ V4.0 program. The results are as follows reliability of four scales for QSCCII is relatively valid. The internal consistency of Tae-yang(太陽) (太陽) scale is Cronbach's a=0.5708. That of So-yang(少陽) scale is a=0.5708. That of Tae-eum(太陰) scale is a =0.5922. That of So-eum(少陰) scale is a=0.6319. 2. There is a significant difference between each group through variation analysis of four scales. 3. The process of standardization is based on the average value and standard deviation with respect to age and sex difference of each criteria 4. This study suggests a source of standardization of Sasang Constitution Classification by providing norms in which the differences of age, sex, and number of items are taken into deep consideration. QSCC Ⅱ, therefore, can be applied to every age(the 10's to the 60's) and sex groups. 5. The recalculation of the raw-score to standard value (T-score) shows that the diagnostic discriminability (Hit-ratio: 70.08%) of QSCC Ⅱ brings about 37% improvement than proportional chance criteria (33.33%). Especially, Hit-ratios of Tae-eum In(74.5%) and So-eum In(70.8%) are higher than that of So-yang In(60.0%). 6. QSCC has discriminability only to male informants. Compared with QSCC, however, QSCC II has relatively efficient discriminability both to male and female informants. 7. These results would be a demonstration of the fact that the QSCC II could be used as a tool for sasang constitution classification.

• Journal of Food Hygiene and Safety
• /
• v.35 no.1
• /
• pp.51-59
• /
• 2020

This study evalutated the risk of foodborne illness from Vibrio spp. (Vibrio vulnificus and Vibrio cholerae) through sea squirt consumption. The prevalence of V. vulnificus and V. cholerae in sea squirt was evaluated, and the predictive models to describe the kinetic behavior of the Vibrio in sea squirt were developed. Distribution temperatures and times were collected, and they were fitted to probabilistic distributions to determine the appropriate distributions. The raw data from the Korea National Health and Nutrition Examination Survey 2016 were used to estimate the consumption rates and amount of sea squirt. In the hazard characterization, the Beta-Poisson model for V. vulnificus and V. cholerae infection was used. With the collected data, a simulation model was prepared and it was run with @RISK to estimate probabilities of foodborne illness by pathogenic Vibrio spp. through sea squirt consumption. Among 101 sea squirt samples, there were no V. vulnificus positive samples, but V. cholerae was detected in one sample. The developed predictive models described the fates of Vibrio spp. in sea squirt during distribution and storage, appropriately shown as 0.815-0.907 of R² and 0.28 of RMSE. The consumption rate of sea squirt was 0.26%, and the daily consumption amount was 68.84 g per person. The Beta-Poisson model [P=1-(1+Dose/β)^-α] was selected as a dose-response model. With these data, a simulation model was developed, and the risks of V. vulnificus and V. cholerae foodborne illness from sea squirt consumption were 2.66×10^-15, and 1.02×10^-12, respectively. These results suggest that the risk of pathogenic Vibrio spp. in sea squirt could be considered low in Korea.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.35-81
• /
• 1998

Distinct Element Method(DEM) has a great advantage to model the discontinuous behaviour of jointed rock masses such as rotation, sliding, and separation of rock blocks. Geometrical data of joints by a field monitoring is not enough to model the jointed rock mass though the results of DE analysis for the jointed rock mass is most sensitive to the distributional properties of joints. Also, it is important to use a properly joint law in evaluating the stability of a jointed rock mass because the joint is considered as the contact between blocks in DEM. In this study, a stochastic modelling technique is developed and the dilatant rock joint is numerically modelled in order to consider th geometrical and mechanical properties of joints in DE analysis. The stochastic modelling technique provides a assemblage of rock blocks by reproducing the joint distribution from insufficient joint data. Numerical Modelling of joint dilatancy in a edge-edge contact of DEM enable to consider not only mechanical properties but also various boundary conditions of joint. Preprocess Procedure for a stochastic DE model is composed of a statistical process of raw data of joints, a joint generation, and a block boundary generation. This stochastic DE model is used to analyze the effect of deviations of geometrical joint parameters on .the behaviour of jointed rock masses. This modelling method may be one tool for the consistency of DE analysis because it keeps the objectivity of the numerical model. In the joint constitutive law with a dilatancy, the normal and shear behaviour of a joint are fully coupled due to dilatation. It is easy to quantify the input Parameters used in the joint law from laboratory tests. The boundary effect on the behaviour of a joint is verified from shear tests under CNL and CNS using the numerical model of a single joint. The numerical model developed is applied to jointed rock masses to evaluate the effect of joint dilation on tunnel stability.