• International Journal of Ocean System Engineering
• /
• 제1권2호
• /
• pp.76-88
• /
• 2011

The present study deals with the hydroelastic vibration analysis of structures in contact with fluid via coupled fluid-structure interaction (FSI) embedded with a finite element method (FEM) such that a structure displacement formulation is coupled with a fluid pressure-displacement formulation. For the preliminary study and validation of FEM based coupled FSI analysis, hydroelastic vibration characteristics of a rectangular plate in contact with fluid are first compared with the elastic vibration in terms of boundary condition and mode frequency. Numerical results from coupled FSI analysis have been shown to be rational and accurate, compared to energy method based theoretical solutions and experimental results. The effect of free surface on the vibration mode is numerically studied by changing the submerged depth of a rectangular plate. As a practical application, the hull structural vibration of 4,000 twenty-foot equivalent units (TEU) container ship is considered. Hydroelastic results of the ship hull structure are compared with those obtained from the elastic condition.

• 대한조선학회논문집
• /
• 제32권2호
• /
• pp.1-9
• /
• 1995

본 연구는 수중운동체의 선형을 수치적으로 표현하고 변형하는 기법을 내용으로 한다. 즉, 주요치수-전체길이, 중앙평행부의 길이, entrance 및 run부분을 정의하는 계수(이하 entrance 및 run계수라 한다.)등-를 주어진 설계조건으로 하여 실린더형 수중운동체를 생성하고, 이것을 NURBS(Nonuniform rational B-spline)곡선으로 표현한다. 또한 선형의 각 단면은 사용자 Interface를 통해 변화되고, 얻어진 수중운동체의 Offset과 횡단면적 곡선(Sectional Area Curve:SAC)을 도출한다.

• 한국해양공학회지
• /
• 제14권1호
• /
• pp.95-101
• /
• 2000

In general, free form design depends on B-spline which is used for the generating hull lines in most of shipyards. But, nowadays, the NURBS method is applied to free form modeling method, which is able to more flexible transformation than B-Spline, and then became industrial standard in the various field. Therefore, this method has been considerably applied in new application fields which are required free form modelling. In this paper, the program called 2DSURF with 5 modules and developed for the generation of hull lines is described. It is examined whether the program can be applied to body lines, sheer lines, and half breadth lines.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.113-120
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.33-39
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권3호
• /
• pp.211-216
• /
• 2013

대부분의 사고선박 예인력 계산을 위한 선체저항 성능 추정은 매우 간단하고 오래된 방법을 사용하고 있는데, 특히 바지선의 경우는 미국 해군 예인 매뉴얼에서 사용하는 방법과 유사한 방법을 사용하고 있다. 본 논문에서는 미국 해군 예인 매뉴얼 방법과 국내 해양수산부 고시 방법을 검토한 결과, 이는 비합리적이고 부정확한 추정 방법임을 밝혔다. 나아가, 바지선에 적용할 수 있는 합리적이고도 정확한 저항 성능 추정 방법으로 새로운 Modified-Yamagata-Barge 방법을 도출하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 Proceeding of CIN-KIN Joint Symposium 2000 on M.E.T. Under STCW 78/95 and SINO-KOREA MARITIME CONTACT IN MID-CENTURIES
• /
• pp.205-218
• /
• 2000

Hull forms of Jiao Yi Ship for shipping and foreign trade in Silla and Tang Dynasty were transformed and developed in accordance to their voyage and rational routes. The trade ship was a sea ship, used by Chang Po Go's, the Silla great sea merchant ship, in the marine trade with China during the 8th and 9th century. It is not easy to presume the hull type and trade formal of Chang Po Go's Jiao Yi Ship of the 8th and 9th Century. Studying on the ship type of the trade ship is the urgent problem to be solved, in the sphere of leaning about the history of communication between China and Korea. The authors take the initial prove into this subjects, by researching Chang Po Go's marine activities, and point out that the trade ship's original type should be the Sha Ship which was the sea ship sailing th sea in northern China, in the Tang Dynasty. This study aims to present materials concerning hull forms of Chang Po Go's Jian Yi Ship by analysing ancient voyage history, foreign trade history, and ship history of Silla, Tang and Japan during the 8th and 9th century.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.78-84
• /
• 2008

As a preliminary step to build a complete superyacht hull design program, the development of superyacht profile design system is introduced. The two-dimensional hull profile is decomposed into four local zones depending upon the functionality and connecting continuity of the profile. Characteristics of each zone are investigated and used to generate the model describing the geometric shape of zone using freeform curves. A set of design parameters is derived from the established geometric model. Generation and modification of a model are is by manipulating the chosen parameters. Four zones designed are integrated to form a final profile. An interactive design system performing all the modeling and modification processes is implemented using the graphic user interface system based an Microsoft Foundation Class and OpenCASCADE, a open graphic library. The shapes of the profiles generated by the developed design system are verified with those of built superyachts. The developed design system will be used for the construction of three-dimensional superyacht hull modeling system.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.40-44
• /
• 2001

선형개발에 대한 연구는 주로 대형선박을 기준으로 Bezier, B-spline 그리고 NURBS와 같은 합성곡선생성기법을 이용하여 일반 곡선기법으로는 표현하기 힘든 구상선수나 굴곡이 심한 선미 등을 표현하고 검증하는 것으로 이루어지고 있다. 하지만, 전체 선박의 70%를 차지하고 있는 중소형 어선의 선형에 대한 연구나 기술적인 보고는 상대적으로 미흡한 실정이다. 본 연구에서는 기존의 라운드타입에서 챠인 및 신챠인타입으로 변화해 가는 중소형 어선의 선형을 NURBS기법을 이용하여 표현하고, 전산화하는 프로그램을 개발하였다.

• 한국해양공학회지
• /
• 제18권3호
• /
• pp.40-43
• /
• 2004

A rational method is presented for estimating the power increase of a ship at sea. A probabilistic approach is applied to determine the weather condition at sea, A comparison is made between some full-scale data and the result of Swift's method. A comparison is also made to find differences among the results of eight kind methods for the wind added resistance of a VLCC in head wind. The mean difference between the results is 7％, in general, for a given relative wind speed.