• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.103-107
• /
• 2021

좁은 밴드갭 반도체 특성을 나타내는 열전소재의 온도에 따른 전자전도 및 열전도 특성은 다수 캐리어 뿐 아니라 소수 캐리어의 전도 거동에 의해 결정된다. 따라서 소수 캐리어의 weighted mobility에 대한 다수 캐리어의 weighted mobility의 비율로 정의되는 weighted mobility ratio는 열전소재의 성능 증대에 매우 중요한 인자이다. 본 논문에서는 열전소재의 전자전도 현상에 대한 이론적인 고찰을 바탕으로 weighted mobility ratio 제어가 열전소재의 성능에 미치는 영향을 규명하여 고성능 Bi-Te계 열전소재 개발에 효과적으로 활용할 수 있는 소재 설계 지침을 제공하고자 한다.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.422-428
• /
• 2003

This study concerns the performance of the heat transfer of the thermosyphons having 60, 70, 80. 90 axial internal low-fins in which boiling and condensation occurr. Water, HCFC-141b and CFC-11 have been used as the working fluids. The operating temperature, the liquid charge ratio and the inclination angle of thermosyphons have been used as the experimental parameters. The heat flux and heat transfer coefficient at the condenser are estimated from experimental results. The experimental results have been assessed and compared with existing theories. As a result of the experimental investigation, it was found that the maximum heat flow rate in the thermosyphons is dependent upon the liquid charge ratio and inclination angle. A relatively high rate of heat transfer has been achieved by the thermosyphon with axial internal low-fins. The inclination of a thermosyphon has a notable influence on the condensation. In addition, the overall heat transfer coefficients and the characteristics at the operating temperature are obtained for the practical applications.

• 유통과학연구
• /
• 제11권6호
• /
• pp.13-19
• /
• 2013

Purpose - This study aims to predict the audit reports of listed companies on the Tehran Stock Exchange by using meta-heuristic algorithms. Research design, data, methodology - This applied research aims to predict auditors reports' using meta-heuristic methods (i.e., neural networks, the ANFIS, and a genetic algorithm). The sample includes all firms listed on the Tehran Stock Exchange. The research covers the seven years between 2005 and 2011. Results - The results show that the ANFIS model using fuzzy clustering and a least-squares back propagation algorithm has the best performance among the tested models, with an error rate of 4% for incorrect predictions and 96% for correct predictions. Conclusion - A decision tree was used with ten independent variables and one dependent variable the less important variables were removed, leaving only those variables with the greatest effect on auditor opinion (i.e., net-profit-to-sales ratio, current ratio, quick ratio, inventory turnover, collection period, and debt coverage ratio).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.609-614
• /
• 2000

This numerical study investigate resonance frequency of natural convection for steady state, periodic flow and chaotic flow in two-dimensional direct numerical simulations, differentially heated, vertical cavities having aspect ratios near unity. The enclosure cavity has isothermal and time dependent temperature side walls and adiabatic top/bottom walls. The aspect ratio is 1/3, 1/2, 1, 2, and 3 for the varying Rayleigh number. Resonance frequency for AR=1 has decrease as the aspect ratio and the Rayleigh number are increasing.

• 한국벤처창업학회:학술대회논문집
• /
• 한국벤처창업학회 2006년도 추계학술발표회
• /
• pp.61-85
• /
• 2006

The Purpose of this study is to prove empirically the relationship between ventures' technology valuation and performance, while considering the uniqueness of Korean firms. We use technology valuation index, marketability valuation index, business valuation index as ex-ante independent variables, use firm's performance(sales, asset, operating income ratio, net income ratio etc) as ex-post dependent variables. Parametric analysis such as Paired T-test, ANOVA are applied in this paper. The results of Empirical analysis is summarized as follows. Firstly, operating income ratio and net income ratio are different in portfolios classified by technology valuation index. Secondly, the growth rate of operating income is different in portfolios classified by technology valuation index. Finally, this study has shown that technology valuation index has possibility which it use the predictive variables of ventures' performances.

• 소음진동
• /
• 제10권6호
• /
• pp.991-997
• /
• 2000

The objective of this study is to examine the onset condition and the frequency characteristics of the low-frequency combustion oscillation in a surface burner. For this purpose, extensive parametric studies have been performed experimentally and the effects of size of each section, the equivalence ratio, and the entrance velocity on oscillatory behavior explored. The experimental results were discussed in comparison with the other combustors associated tilth the low-frequency combustion oscillation. The combustion mode is driven at high combustion rate by the lift of unstable flame near the lower limit of the combustible equivalence ratio. The oscillation frequency is dependent not on the burner geometry but on the equivalence ratio and the combustion load. Low-frequency combustion mode was formed to be divided into two different modes, named C1 and C2 respectively. Two modes occurred individually, simultaneously or transitionally according to the equivalence ratio and combustion load. The characteristics of low-frequency oscillation is different from each other depending on the type of combustors. The surface burner has also its own characteristics of low -frequency oscillation.

• 한국지반환경공학회 논문집
• /
• 제14권1호
• /
• pp.33-42
• /
• 2013

In this paper, a series of monotonic undrained shear tests were carried out on four kinds of sand-fine mixtures with various fines content. Two kinds of sands (Silica sand V3, V6) and fines (Iwakuni natural clay, Tottori silt) were mixed together in various proportions, while paying attention to the void ratio expressed in terms of sand structure $(F_c{\leq}F_{cth})$. The undrained shear strength of mixtures below the threshold fines content was observed so that as the plastic fines content increases, maximum deviator stress ratio decrease for dense samples while an increase is noted for loose samples. For non-plastic fines, the increase in the amount of fines leads to an increase in density of the soil, which results in an increase in strength. Then, the monotonic shear strength of the mixtures was estimated using the concept of granular void ratio. It was found that the shear strength of mixtures is greatly dependent on the skeleton structure of sand particles.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2308-2315
• /
• 1995

We studied the effects on the ignitability of mixture, the combustion duration, and the maximum combustion pressure, of various initial combustion factors such as temperature, pressure, and each equivalence ratio in order to identify the combustion characteristics of lean mixture and improve ignitability through the proper control of the ignition energy. It is concluded that there is an optimum turbulent intensity that enables the combustion to have the best ignitability and the shortest duration under each equivalent ratio, and the combustion duration is only dependent upon the distribution and magnitude of discharge energy within the limit of inflammability.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.259-266
• /
• 2003

This paper introduces a relation to determine the span ratio between exterior and interior spans, which is strongly required in the preliminary design stage of bridges constructed by Free Cantilever Method (FCM). A relation for the initial tendon force is derived on the basis of an assumption that no vertical deflection occurs at the far end of a cantilever beam due to the balanced condition between the self-weight and the cantilever tendons. In advance, the span ratio can be determined by using an assumption that the negative maximum moment must be the same with the positive maximum moment along the entire spans to be a rational bridge design. Finally, many rigorous lime-dependent analyses are conducted to establish the validity of the introduced relations. The obtained numerical results show that the rational design of FCM bridges may be achieved when the span length ratio of the exterior span to the interior span ranges about 0.75 to 0.8.

• 한국표면공학회지
• /
• 제23권3호
• /
• pp.150-159
• /
• 1990

The magnetic properties of electrodeposited iron and cobalt films on porous aluminum oxide film were examined. There exists perpendicular magnetic anisotropy due to the shape anisotropy. The coercivity and squareness ratio of films were strongly dependent on deposited particle diameter. The effect of packing fraction on squareness ratio was also apprecible. Unlike the iron-deposited films, the magnetic properties of cobalt films were changed by preferred orientation because of it's large crystal ansotropy constant.(about 10 times of Fe) The Fe deposited films were found to be more suitable for perpendicular magenetic recording media bacause perpendicular coercivity, squareness ratio and the ratio of perpendicular coercivity to horizontal ones of iron films are greater than those of cobalt films.