• Korean Journal of Poultry Science
• /
• v.36 no.2
• /
• pp.149-155
• /
• 2009

The present study was conducted to compare the carcass yields and meat characteristics of three types of commercial male chicks White mini broilers, Ross broilers and Hy-Line brown chicks under the identical feeding condition. One-hundred 1-d chicks of each type were randomly placed into four pens per group (25 chicks per pen) and fed corn-soybean meal based commercial diets for 35d, 18d or 49d, respectively. At the end of the feeding trial, the birds were sacrificed and subjected to carcass measurements. The dressing percentages of White mini broilers and Ross broilers were significantly higher (P<0.05) than that of Hy-Line brown cockerels. The rate of breast meat of Hy-Line brown cockerels was significantly lower (P<0.05) than those of White mini broilers and Ross broilers. However, Hy-Line brown cockerels showed higher (P<0.05) leg meats than the others. There were no significant differences in serum total cholesterol and the activities of glutamic-oxaloacetic transaminase and glutamic-pyruvic transaminase among the groups. The breast meats of White mini broilers presented highest lightness value. The yellowness of breast and redness of leg meats of White mini broilers and Ross broilers were significantly higher (P<0.05) than those of Hy-Line brown cockerels. There were no significant differences in the SOD-like activity and change of pH in edible meats among the groups. The meat color in White mini broilers was significantly higher than that of Hy-Line brown cockerels. No significant differences were observed in term of flavor, tenderness and overall acceptability. In conclusion, the physico-chemical properties and sensory characteristics of edible meats were not greatly affected by genotype if they were similar body weights and kept under the identical feeding condition. But the Hy-Line brown cockerels were less desirable as a meat-type strain due to lower carcass yields and inferior growth and feed conversion ratio.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.51-63
• /
• 2002

This study sought to identify the kinematic characteristics at entrance to the straight course from the curvilinear course in the 200m-track game. For this purpose, this study was conducted for 4 sprinters by setting the 10m-section combined from the curvilenear track to the straight course and shooting them with the camcorder. It was set up to include all the sections of analysis by using the framework of the control point knowing the coordinate of the space and actual analysis was conducted on the motion showing the best records by conducting it for each subject five times. As a result, the following conclusion was drawn: It was found that the subjects showed the average stride of 4.5${\pm}$0.41 times at the 10-meter section and the required time of 1.42${\pm}$0.04sec. They showed the ratio average stride to height of 1.25${\pm}$0.20% and the average speed of 7.06${\pm}$0.19m/s. The displacement in the center of gravity of the human body at the section combined from the curvilinear course to the straight course was moving along the inward course of the curvilinear course, and the displacement of the leg located at the outward direction(right) was found to be larger than that of the leg located at the inward direction(left). In the speed of the left and right hand segments, it was found that the speed of the right hand located in the outward direction was faster than that of the left hand located at the inward, and it was found that the subjects progressed in the curvilinear course. The subjects showed the larger angle of the shoulder joint when the upper arm was located in the forward direction than when the it was located in the backward direction. In the curvilinear course, they showed the lower value of the lateral angle of the trunk when the right foot located at the outward direction left the ground than when the left foot located at the inward direction left the ground. And it was found that the lateral angle of the trunk became lower with approaching the straight course.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.131-155
• /
• 1983

Though it has been widely known the nitrogen effects are influenced by soils, varieties, and mineral nutrients in the rice culture, few analyses in relation to the factors increasing nitrogen effect have been studied in Korea. The effects of potassium and silica on the factors increasing nitrogen effects in paddy soils were investigated in accordance with soil improvement practices and nitrogen application methods for the cultivated varieties. The results obtained are as follows. 1. For 413 paddy fields, the yield from soils without nitrogen application ranged from 200 to 850kg/10a and that from nitrogen application did 350 to 1,051kg/10a. The yield increament by nitrogen application varied 50 to 650kg/10a depending on soils. 2. Soil chemical characteristics for high yield were different between with nitrogen and without nitrogen application. In the without nitrogen application, however, contents of organic matter, phosphorous, potassium and calcium of high yield soils were lower than those of low yield, while the available silica content was higher in the former. 3. The yield increased with nitrogen application up to 22.4kg/10a and thereafter it decreased. These phenomena were supposed to be not be decrease of nitrogen uptake but by lowered silica uptake. 4. Clay soil incorporation, deep plough, and inorganic constituents control such as Ca, Mg, and $Sio_2$ were effective as soil improvement praitices. It was appeared that increases of silica content and Ca/Mg ratio were important to increase nitrogen effects. 5. For the correlation between yield and yield components, it was high between yield and panicle in low nitrogen level and so was it between grain yield and ripening rate in high nitrogen. 6. In the urea and super granule urea application plot, recovery rate of nitrogen by plant and soil was high and yield was remarkable high. 7. Regardless of fertilizer types such as ammonium sulfate and urea, the residual nitrogen was about 4kg/10a in both plots of 5.8 and 11.6kg/10a. N applied. 8. The potassium application to soil enhanced the nitrogen efficiency. It was more effective in low potassium soil. 9. Optimum pH value for gel formation in the 4% sodium silicate solution was approximately 6.6. 10. It was suggested that silica could affect to rice plant growth as the inorganic and organic chemical components.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.8
• /
• pp.1302-1310
• /
• 2004

The purpose of this study was to investigate whether a web-based nutrition counseling could lead to beneficial outcomes in food intake and serum lipids of patients with hyperlipidemia. Forty hyperlipidemic patients, twenty of them were hypercholesterolemia and the other twenty were hypertriglyceridemia, participated in a web-based nutrition counseling program. At the first nutrition counseling, the patients were counselled through interview and then follow up nutrition counseling was accomplished four times during eight weeks through a web-based internet program. Various markers of disease risk including anthropometric indices, food intakes and serum lipid levels were measured before and after the web-based nutrition counseling. After nutrition counseling, body mass index significantly decreased in both groups and waist to hip ratio significantly decreased in male hypercholesterolemic patients (p<0.05). Total-cholesterol decreased from 262.2 mg/dL to 234.9 mg/dL, LDL-cholesterol decreased from 186.8 mg/dL to 160.5 mg/dL in hypercholesterolemic patients, triglyceride decreased from 288.6 mg/dL to 211.9 mg/dL and total-cholesterol decreased from 217.2 mg/dL to 198.7 mg/dL in hypertriglyceridemic patients after nutrition counseling. Anthropometric value and nutrient intakes were improved after nutrition counseling. Energy, fat and saturated fatty acid intakes decreased significantly in both groups (p<0.05). Therefore, this study shows that the web-based nutrition counseling is effective in improving food habit and influences positively in serum lipid levels of the patients. In addition, these results indicate that internet presents us with potential as a new medium for nutrition counseling in informationized society.

• Journal of Korea Foresty Energy
• /
• v.19 no.2
• /
• pp.93-101
• /
• 2000

Wood of Robinia pseudoacacia and bark of Populus alba$\times$P. glandulosa, Fraxinus rhynchophylla and Ulmus davidiana var. japonica were collected and extracted with acetone-water(7:3, v/v) in glass jar to examine whether its bioactive compounds exist. The concentrated extracts were fractionated with hexane, chloroform, ethylacetate and water, and then freeze-dried for column chromatography and bioactive tests. The isolated compounds were sakuranetin-5-O-$\beta$-D-glucopyranoside from Populus alba $\times$Pl glandulosa, 4--ethyoxy-(+)-leucorobinetinidin frm R. pseudoacacia and fraxetion from F. rhynchophylla and were characterized by $^1H$ and$^{13}C $ NMR and positive FAB-MS. Decay-resistant activity was expressed by weight loss ratio and hyphae growth inhibition in the wood dust agar medium inoculated wood rot fungi. R. pseudoacacia showed best anti-decaying property in both test and its methanol untreated samples, indicating higher activity than methanol treated samples in hyphae grwoth test. In antioxidative test, $\alpha$-tocopherol, one of natural antioxidants, and BHT, one of synthetic antioxidants, were used as references to cmpare with the antioxidant activities of the extacted fractions. Ethylacetate fraction of F. rhynchophylla bark indicated the hightest activity in this test and all fractions of R. pseudiacacia extractives also indicated higher activities compared with the other fractions. In the isolated compounds, aesculetin isolated from F. rhynchophylla bark showed best activity and followed by robonetinidin from R. pseudoacaica.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.288-292
• /
• 1998

Thermooxidative stabilities of soybean oil, beef tallow and palm oil were studied during frying of steamed noodles. Steamed noodles were fried in $150^{\circ}C$ oils for 70 sec at the interval of 30 min. The frying oil was taken every 8 hrs for the analysis of peroxide value (PV) and free fatty acid (FFA) content, fatty acid composition, and tocopherol and tocotrienol content. A little change was shown in PV and FFA content in soybean oil during frying; on the other hand, rapid increase in beef tallow and palm oil was observed. Unsaturated fatty acid content was the highest in soybean oil, followed by palm oil and beef tallow. While fatty acid composition in soybean oil was not changed during frying, unsaturated fatty acid content decreased and saturated fatty acid increased in beef tallow and palm oil, which showed susceptibility to the oxidation. The ratio of linoleic acid to palmitic acid did not show difference with frying time in soybean oil: however, it decreased in other oils with a high correlation with frying time and higher decreasing rate in palm oil was observed. These suggested that soybean oil was the most stable to thermooxidation and the stability was followed by beef tallow and palm oil. Tocopherol was disappeared during frying and 87.5, 81.1, and 73.1% were remained in soybean oil after 8, 16 and 24 hour frying, respectively. Also the rate decreased in the order of ${\gamma}-,\;{\beta}-\;and\;{\alpha}-tocopherol$. However, 34.2 and 169.0 ppm tocopherol and tocotrienol which were present in control samples of beef tallow and palm oil were completely disappeared by 8 hr frying. Therefore, high thermooxidative stability of soybean oil resulted from higher residual amount of tocopherol during frying, and lower stability of palm oil than beef tallow was partly due to high degree of unsaturation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.197-205
• /
• 2011

Purpose: This study was to evaluate the accuracy of the implant torque controller used in dental clinics and to investigate whether it was applied appropriately. Materials and methods: Fifty dentists who work in dental clinics were enrolled in this study. Dental (implant) practice career, experience frequency of implant screw loosening and fracture, education of implant torque controller application and infection control methods were included in the survey. 25 Ncm and 30 Ncm of the tightening torque applied to the implant screw were measured by 50 clinicians. After measuring the torque value by using the torque controller, the torque mean according to where education about the implant torque controller was received was analyzed with independent t-test at the significance level of 0.05. Results: The torque controller used in private dental clinics showed 4.78% error ratio. When 50 dentists applied 25 Ncm to the implant screw was $29.0{\pm}8.4$ Ncm, and that in 30 Ncm was $34.3{\pm}9.1$ Ncm. Statistical significance was found between the group that was educated about implant torque application and the group that was not educated. Conclusion: During the prosthodontic treatment with implant, there was difference between actual applied torsion force and the amount torque controller indicated. Clinicians have to not only be well-informed about the accurate usage method of the torque controller, but also keep and manage the torque controller so as to maintain continuous and accurate torque values. Through this, it is considered to achieve clinical results to minimize problems of screw loosening or fracture.

• Clean Technology
• /
• v.17 no.1
• /
• pp.62-68
• /
• 2011

Hydrodynamic characteristics in multistage annular type fluidized bed (riser: $0.01{\times}0.025{\times}2.8m^3$, J-valve: $0.009{\times}0.015m^2$)were investigated. Glass beads ($d_p=101{\mu}m$, ${\rho}_b=1,590kg/m^3$, $U_{mf}=1.25{\times}10^{-2}m/s$, Geldart classification B) was used as a bed material. Accumulated weight by the electronic balance was measured to determine the solid flow rate in batch-type. In circulation condition, we measured the accumulated weight of particle transported from riser. At the steady state condition, solid circulation rate was calculated from time interval of the heated bed material passing between two thermocouples. Solid flow rate increased with increasing inlet gas velocity ($1.2-2.6U_{mf}$) and the static bed height (z, 0.24-0.68 m) from 2.2 to 23.4 kg/s. However, mean residence time decreased with increasing inlet gas velocity ($1.2-2.6U_{mf}$) and the static bed height (z, 0.24-0.68 m) from 1,438 to 440 s. The solid holdup in the riser was determined by measuring pressure differences according to the riser height. These results showed a similar trend to that of simple exponential decay type except for the top section of the riser. To verify the gas bypassing from top bubbling beds to middle bubbling beds, $CO_2$ gas was injected by tracer gas in constant ratio, and then was measured $CO_2$ concentration in outlet gas by gas chromatography. Gas bypassing occurred below 2.6% which is negligible value.

• Journal of Chest Surgery
• /
• v.29 no.8
• /
• pp.816-821
• /
• 1996

Lung transplantation is the established treatment for the end stage lung disedse find preservation of the organ is a major obstacle In performing lung transplantation. For solving this problem, we evaluated the histopathologic changes for various preservation solutions. Male mongrel dogs of similar size and weight (15∼20 kg) were used. The dog lungs were flushed with 4fl normal saline(group 1 'n:5): Modified Euro-Collins solution(group 2 n:5) and University of Wisconsin solution (group 3 : n=6), 60m11kg through a catheter placed in the main pulmonary artery aft r flushing of PGE 1 (20ng1kg). The lungs were preserved for 60 hours and measured dry and wet weights. Histologic specimens were taken every 6 hours and %toed for light microscopic evaluation. The edema ratio of the lungs peaked in 12 hours although there was no difference between the groups. Histologically, alveolar septal changes developed in one case (20%) after 1 hour preservation with normal saline. In case of the University of Wisconsin solution, the alveolar septal distortions and swellings were seen in 1 cases (20%) after 6 hours preservation compared with 3 cases (60%) after 6 hours preservation with Modified Euro-Collins solution. Changes of the pneumocytes were observed after 24 hours preser- vation in group 1, after 48 hours preservation in group 2 and after 60 hours preservation in group 3. We conclude that University of Wisconsin solution might have a superior preservation effect compare to normal saline and Modified Euro-Collins solutions.

• Journal of Sericultural and Entomological Science
• /
• v.7
• /
• pp.1-26
• /
• 1967

In order to develop the standards for the measurement of drought resistance in mulberry trees (Morus genus) the varietal differences of drought resistance were measured for 30 mulberry varieties, and the relationships between the drought resistance and the histological and physiological characteristics of mulberry leaves were investigated. The results were summarized as follows; 1. It is reasonable to use the drought resistance ratio, expressed by D/D'＊100, for the standard of drought resistance measurement for mulberry tree as a perennial tree crop. Where: D stands for growth amount(shoot length) in the plot of dry treatment, at the end of treatment. D' stands for an expected value of D which is expressed by B＊C/A. Here, A is the growth amount of wet treatment plot at the beginning of treatment, B is the growth amount of dry treatment plot at the beginning of treatment, and C is the growth amount of wet treatment plot at the end of treatment. 2. The results obtained from the application of above formula showed that the varieties Cadaneo, Tahozosaeng, Yongchunchuwu, Kaeryang suban. and Kabsun were highly resistant to drought and the varieties Jukmok, Shipyung, Sobun, Kaeryangzosaeng shipmoonza and Chungagokyo were highly susceptible. 3. Among leaf tissues. the rate of inter-cellular space showed the highest relationship with drought resistance. The correlation coefficient calculated (r=0.4153) was highly significant. Other leaf tissues such as epidermis and palisade showed no significant correlations with drought resistance. 4. The size and density of stomata were correlated to drought resistance. That is: Correlation between drought resistance and size of stomata(length ${\times}$ width)......r= -0. 3253(signif. at 5%) density(No. of stomata/l$\textrm{mm}^2$......r= +0.5047(signif. at 1%)