• 대한정형도수물리치료학회지
• /
• 제7권2호
• /
• pp.5-22
• /
• 2001

The purpose of this study was to investigate the balancing training effect on weight bearing ratio and postural sway on the unstable surface for the CVA patients with balance disability. The inclusion criteria were walking independently 20m distances. Eighteen subjects, 4 with right and 14 with left hemiplegic patients were participated in this study. The range of age was from 35 to 75 and the duration from onset time was from 1 to 38 months. The intervention program including balancing training that they were introduced for 10 minutes every other day during 12 weeks to experimental group, and general therapeutic exercise to control group. The result of this study were as following; 1. The balancing training on the unstable surface showed that the postural sway of left/right distribution would appear more effective on sitting with eyes opened. 2. The balancing training on the unstable surface showed that the postural sway of forward/rear distribution, left/right distribution and distance would appear more effective on standing with eyes opened. 3. The balancing training on unstable surface would increase more effective on the weight-bearing ratio of left/right difference and frequency. 4. The balancing training on unstable surface was statistical significant on the postural sway of left/right distribution and area in experimental group. and it was statistical significant on the postural sway of forward/rear distribution, left/right distribution and distance in control group, too.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.138-145
• /
• 2018

The aim of this work is the attainment of the $TiO_2-nanotube$ photocatalytic-growth condition using anodization, whereby the $NH_4F-H_2O$ weight ratio is appropriately controlled. We fabricated the $TiO_2$ nanotubes using a two-step anodization (first step is 1 hr; second step is 30 hr) under the ambient pressure and the room temperature at 60 V in ethylene-glycol solutions to investigate the effects of the $NH_4F$(0.1,0.3,0.5wt%) and $H_2O$(1-3wt%) on the $TiO_2-nanotube$ geometry and the photocatalytic efficiency. Further, the decomposition efficiency of the methylene blue on the $TiO_2$ nanotubes by the UN radiation depended on the geometrical change of the nanotube geometry, indicating the proportionality of the decomposition efficiency to the surface area that was affected by the $NH_4F$ and $H_2O$ concentrations. As the $NH_4F$ weight was increased, the surface area initially decreased but slightly increased later, and the length consistently increased. As the $H_2O$ weight was increased, the surface area and length initially increased, but later decreased with the 3 wt% $H_2O$.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1980년도 학술대회지
• /
• pp.39-47
• /
• 1980

The harvesting and export of Canadian ginseng from the cool, shady hardwood forests of southern Canada can be traced to 1796. Because of its high dollar value and diminishing woodland supplies it was decided in 1896 that it should be cultivated under wood lath screens. Present day economics dictate changes in production techniques to allow for a decreasing supply of expensive labour. Traditional wooden lath screens have a surface area of wood of 70 per cent and permit light penetration of only about 18 per cent. Experimental woven black polypropylene shade has an estimated surface area of 72 per cent and permits light pentration of about 28 per cent. While differences in air and leaf temperatures under the two shade structures can be measured it is doubtful if these are great enough to cause differences in plant growth under the two structures. Shade grown ginseng had a low fresh and dry weight and total chlorophyll content (ratio of a to b was 3 to 1) comparable to other shade species. There was no differences in fresh and dry weight and chlorophyll content of leaves from plants grown under the two shade structures. Maximum net photosynthesis of leaves was 0.175 g $CO_2\;m^{-2}\;hr^{-1}$ and light saturation level was about $200{\mu}E\;m^{-2}\;s^{-1},$ or about 10 per cent of full sunlight.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.68-74
• /
• 2016

In this study, the fabrication of zeolite combined activated carbon spherical samples was carried out as follows. Briefly, ZSM-5 zeolite and activated carbon were composed as main absorbent materials; by controlling the weight percentage of zeolite and binder materials, a series of spherical samples (AZP 4, 6, 8) were prepared. These spherical samples were characterized by BET, XRD, SEM, EDX, and pressure drop; benzene and iodine adsorption tests, bactericidal effect test, and ignition temperature test were also performed. The adsorption capability was found to depend on the BET surface area; the spherical samples AZP6 with high BET surface area of $1011m^2/g$ not only exhibited excellent removal effects for benzene (24.9%) and iodine (920mg/g) but also a good bactericidal effect. The enhanced ignition temperature may be attributed to the homogeneous dispersion conditions and the proper weight percentage ratio between zeolite and activated carbon.

• Composites Research
• /
• 제36권6호
• /
• pp.402-407
• /
• 2023

Activated carbon fibers (ACFs) are fibrous form of activated carbon (AC) with higher mechanical strength and flexibility, which make them suitable for building modules for applications including directional gas flow such as air and gas purification. Similarly, ACFs are anticipated to excel in the efficient capture of CO₂. However, due to the difficulties in fabricating monofilament carbon fibers at a laboratory scale, most of the studies regarding ACFs for CO₂ capture have relied on electrospun carbon fibers. In this study, we fabricated monofilament carbon fibers from PAN-based monofilament precursors by stabilization and carbonization. Then, ACFs were successfully prepared by chemical activation using KOH. Different weight ratios ranging from 1:1 to 1:4 were employed in the fabrication of ACFs, and the samples were designated as ACF-1 to ACF-4, respectively. As a function of KOH ratio, increase in surface area could be observed. However, the CO₂ adsorption trend did not follow the surface area trend, and the ACF-3 with second largest surface area exhibited the highest CO₂ adsorption capacity. To understand the phenomena, nitrogen content and ultramicropore distribution, which are important factors determining CO₂ adsorption capacity, were considered. As a result, while nitrogen content could not explain the phenomena, ultramicropore distribution could provide a reasoning that the excessive etching led ACF-4 to develop micropore structure with a broader distribution, resulting in high surface area yet deteriorated CO₂ adsorption.

• 전기화학회지
• /
• 제4권1호
• /
• pp.1-5
• /
• 2001

리튬이온전지용 정극활물질인$LiMn_2O_4$ 정극복합제의 조성을 최적화 하기 위하여 활물질, 도전재, 결합제 등의 비표면적 비율을 인자로 이용하였다. 결합제는 최소한의 양으로 사용되어 도포 후, 그리고 전해액에 함침 되었을 때에도 집전체와의 접착력을 유지할 수 있어야 하며, 이를 위해서는 $130^{\circ}C$의 열압착이 효과적이었다. 결합제의 최소 필요량은 활물질 및 도전재의 표면적에 따라 변하는 값으로, 활물질 및 도전재의 전체표면적에 대한 결합제의 무게비율이 $1.1\%$ 이상일 때 탈리가 일어나지 않았다. 정극의 전자전도도를 증가시킴으로서 eel떠 내부저항을 낮출 수 있었으며, 전자전도도를 0.019mS/cm에서 0.036mS/cm로 증가시킴에 따라 0.2C rate에서의 방전용량에 대한 2C rate에서의 방전용량의 비율을 $76\%$에서 $93\%$로 $17\%$개선할 수 있었다.

• Corrosion Science and Technology
• /
• 제21권2호
• /
• pp.147-157
• /
• 2022

Electrochemical characteristics and damage behavior of 6061-T6 aluminum alloy used as a battery housing material for electric vehicles were investigated in solution simulating the acid rain environment with chloride concentrations. Potentiodynamic polarization test was performed to analyze electrochemical characteristics. Damage behavior was analyzed through Tafel analysis, measurement of damage area, weight loss, and surface observation. Results described that corrosion current density was increased rapidly when chloride concentration excceded 600 PPM, and it was increased about 7.7 times in the case of 1000 PPM compared with 0 PPM. Potentiodynamic polarization experiment revealed that corrosion damage area and mass loss of specimen increased with chloride concentrations. When chloride concentration was further increased, the corrosion damage area extended to the entire surface. To determine damage tendency of pitting corrosion according to chloride concentration, the ratio of damage depth to width was calculated. It was found that the damage tendency decreased with chloride concentrations. Thus, 6061-T6 aluminum alloy damage becomes larger in the width direction than in the depth direction when a small amount of chloride is contained in an acid rain environment.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.138-144
• /
• 2003

Rencentely, the request for the light weight is more incresed in the area of industrial environment and machinery and consistent effort is needed to accomplish high strength of material for the direction of light weight. we got the following characteristic from crack growth test carried out in the range of stress ration of 0.1, 0.3 and 0.6 by means of opening mode displacement. At the content stress ratio, the threshold stress intensity factor crack range ${\Delta}K_{th}$in the early stage of fatigue crack growth (Region I) and dtress intensity factor range ${\Delta}K$ in the stable of fatigue crack growth (Region II) with an increase in ${\Delta}K$. Fatigue life shows more improvement in the Shot-peened material than in the Un-peening material. And compressive residual stress of surface on the Shot peening processed operate resistance force of fatigue. So we can obtain fallowings. (1) The fatigue crack growth rate on stage II is conspicuous with the size of compressive residual stress and is depend on Paris equation. (2) Although the maxium compressive residual stress is deeply and widely formed from surface, fatigue life does not improve than when maxium compressive residual stress is formed in surface. (3) The threshold stress intensity factor range is increased with increasing compressive residual stress.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.1-10
• /
• 2020

This study deals with the fabrication and thermal characterization of planar heating elements attached to the backside of the reflector used in the electrodeless lamp of a freezer. We tried to solve the problem of the local heat generation of the linear heating element that occurs about 50℃. The homogeneous dispersion and manufacturing excellence of the planar heating element produced were confirmed through SEM and EDS. In addition, the test specimens was prepared according to the change in the ratio of carbon fiber to the basis weight of the planar heating element, and a sample having a basis weight of 50g/㎡ having a content ratio of carbon fiber of 70% was selected. That sample showed low surface resistance of 4.3Ω/sq and high temperature of about 81℃ at 6V. Durability was confirmed by performing repeated bending evaluation of 3000 cycles for the sample. Large area test specimens were prepared to be applied to the actual reflector, insulated by EVA film and analyzed for their thermal characteristics. From 13V application, the temperature of the linear heating element was higher than 50℃ and the average temperature of 68℃ was maximum at 18V.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.643-648
• /
• 2013

Activated carbon (AC) was synthesized from rice husks using the chemical activation method with KOH, NaOH, a combination of (NaOH + $Na_2CO_3$), and a combination of (KOH + $K_2CO_3$) as the chemical activating reagents. The activated carbon with the highest surface area (around $2000m^2/g$) and high porosity, which allows the absorption of a large number of ions, was applied as electrode material in electric double layer capacitors (EDLCs). The AC for EDLC electrodes is required to have a high surface area and an optimal pore size distribution; these are important to attain high specific capacitance of the EDLC electrodes. The electrodes were fabricated by compounding the rice husk activated carbons with super-P and mixed with polyvinylidene difluoride (PVDF) at a weight ratio of 83:10:7. AC electrodes and nickel foams were assembled with potassium hydroxide (KOH) solution as the electrolyte. Electrochemical measurements were carried out with a three electrode cell using 6 M KOH as electrolyte and Hg/HgO as the reference electrode. The specific capacitance strongly depends on the pore structure; the highest specific capacitance was 179 F/g, obtained for the AC with the highest specific surface area. Additionally, different activation times, levels of heating, and chemical reagents were used to compare and determine the optimal parameters for obtaining high surface area of the activated carbon.