• 농약과학회지
• /
• 제8권2호
• /
• pp.107-111
• /
• 2004

농약의 특성 및 과일별 농약의 잔류특성을 구명하기 위하여 복숭아, 포도 및 배 등 과수를 시험작물로 하여 침투성 살균제인 hexaconazole 2% SC와 비침투성 살균제인 chlorothalonil 53% SC를 혼용 희석하여 시험과수의 지상부에 1회 살포한 후 2시간, 3, 7, 14, 21일 째에 과일을 시료로 채취하였고, 시험기간 중 과일의 증체량을 조사하였다. 또한 경시적으로 농약 잔류량과 과육 및 과피 중 잔류농약의 분포비율을 조사하였다. 과일의 증체량은 털이 있는 복숭아는 약제 살포 21일 후에 약 57%, 털이 없는 천도복숭아는 약 40% 증가되었고, 포도와 배는 변화가 거의 없었다. 농약살포 직후와 대비한 21일 후의 잔류량을 비교한 결과 hexaconazole의 경우 복숭아에서는 13%, 포도에서는 24%, 배에서는 36% 농약이 잔류하였고, chlorothalonil의 경우에는 각각 11%, 27% 및 44%의 농약이 잔류하였다. 과일의 과피와 과육 등 부위별 잔류량을 조사한 결과 과육에서는 모든 시험구에서 검출한계 미만으로 검출되지 않았다.

• 한국재료학회지
• /
• 제22권6호
• /
• pp.321-327
• /
• 2012

The production of functional activated carbon materials starting from inexpensive natural precursors using environmentally friendly and economically effective processes has attracted much attention in the areas of material science and technology. In particular, the use of plant biomass to produce functional carbonaceous materials has attracted a great deal of attention in various aspects. In this study the preparation of activated carbon has been attempted from rice husks via a chemical activation-assisted microwave system. The rice husks were milled via attrition milling with aluminum balls, and then carbonized under purified $N_2$. The operational parameters including the activation agents, chemical impregnation weight ratio of the calcined rice husk to KOH (1:1, 1:2 and 1:4), microwave power heating within irradiation time (3-5 min), and the second activation process on the adsorption capability were investigated. Experimental results were investigated using XRD, FT-IR, and SEM. It was found that the BET surface area of activated carbons irrespective of the activation agent resulted in surface area. The activated carbons prepared by microwave heating with an activation process have higher surface area and larger average pore size than those prepared by activation without microwave heating when the ratio with KOH solution was the same. The activation time using microwave heating and the chemical impregnation ratio with KOH solution were varied to determine the optimal method for obtaining high surface area activated carbon (1505 $m^2$/g).

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.715-722
• /
• 2022

Pt-Fe/carbon black nanocatalysts were prepared by spontaneous reduction reaction of Platinum(II) acetylacetonate and Iron(II) acetylacetonate in a nucleophilic solvent and they were characterized by scanning electron microscopy (SEM), energy dispersive X-ray analyzer (EDS), thermogravimetric analyzer (TGA), transmission electron microscopy (TEM), Brunauer, Emmett and Teller (BET) surface area analysis and anion exchange membrane (AEM) water electrolysis test station. The distribution of the Pt and Fe nanoparticles on carbon black was observed by TEM, and the loading weight of Pt-Fe nanocatalysts on the carbon black was measured by TGA. Elemental ratio of Fe:Pt was estimated by EDS and it was found that elemental ratio of Pt and Fe was changed in the range of 1:0 to 0:1, and the loading weight of Pt-Fe nanoparticles on the carbon black was 5.95-6.78 wt%. Specific surface area was greatly reduced because Pt-Fe nanocatalysts blocked the pores. I-V characteristics were estimated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.663-667
• /
• 2005

Surface modified carbon nanotubes were applied into the epoxy composites to investigate its tribological property. Carbon nanotubes reinforced epoxy composites were fabricated by casting. Effects to the tribological property of loading concentrations and types of surface modification of carbon nanotubes were investigated under sliding condition using linear reciprocal sliding wear tester. The results show that the small amount of carbon nanotubes into the epoxy exhibited lower weight loss than the pure epoxy. It is concluded that the effect of an enormous aspect ratio of carbon nanotubes surface area which wider than conventional fillers that react as interface for stress transfer. As increased the contents of carbon nanotubes, the weight loss from the wear test was reduced. And the surface modified carbon nanotubes show better tribological property than as produced carbon nanotubes. It is due that a surface modification of carbon nanotubes increases the interfacial bonding between carbon nanotubes and epoxy matrix through chemical bonding. Changes in worn surface morphology are also observed by optical microscope and SEM for investigating wear behaviors. Carbon nanotubes in the epoxy matrix near the surface are exposed, because it becomes the lubricating working film on the worn surface. It reduces the friction and results in the lower surface roughness morphology in the epoxy matrix as increasing the contents of the carbon nanotubes.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제8권1호
• /
• pp.33-41
• /
• 2004

The type of trichomes, their density and pattern of distribution on leaves of 16 genotypes of mulberry, belonging to both diploid and polyploid categories, were studied by scanning electron microscope. The present investigation was undertaken to find out the relationship of physical attributes, especially the density and trichome types with higher acceptability and better rearing performance by the silkworm Bombyx-mori L. Two types of trichomes glandular and non-glandular types were observed on both the leaf surfaces of all the mulberry genotypes studied. In general, greater densities of trichomes were observed on the abaxial surface than the adaxial surface of leaves in most of the genotypes. Distribution of glandular trichomes were more in abaxial surface and non-glandular trichomes were more in adaxial surface. Overall, distribution of glandular and non-glandular trichomes per unit area of leaf did not follow any regular pattern. When leaves of those genotypes were fed to silkworms, trichome density was found to be significantly negatively correlated with the survival of larvae i.e., effective rate of rearing, but trichome density did not influence the economic characters of rearing. As the distribution of glandular trichomes (GT) and non-glandular trichomes (NGT) did not follow any definite pattern, no relation could be established between the GT and NGT densities with silkworm rearing performance. However, the ratio of GT and NGT in a particular genotype influenced the rearing parameters, higher the ratios better the rearing performance. High GT and NGT ratio (＞1.00) was found positively significant when correlated with economic parameters viz., larval weight, single cocoon weight and single shell weight. The study is useful in screening different mulberry genotypes for their better acceptability to silk-worm and higher rearing performance at the early stage of selection without actually conducting the rearing.

• Journal of Ginseng Research
• /
• 제29권2호
• /
• pp.113-118
• /
• 2005

본 연구는 수삼의 저장용기로 많이 이용되고 있는 플라스틱 상자의 통기구 비율 즉 개공율이 수삼의 저장성에 미치는 영향을 조사하기 위하여 개공율을 밀폐(0), 1, 3, 5, 및 $10\%$로 설정하여 실온에서$(19\~23^{\circ}C,\;RH\;40\~61\%)$ 10일간, 냉장으로$(4\~9^{\circ}C,\;RH\;72\~92\%)$ 30일간 저장하면서 이 화학적 변화를 조사한 결과는 다음과 같다. 실온에서 외관변화는 밀폐구에서 4일 부터 곰팡이 발생이 관찰되며 10일째는 부패하였고, $1\%$는 8일부터 곰팡이 발생이 관찰되었다. $5\%$와 $10\%$ 개공율은 4일부터 시들기 시작하였다. 중량감모율은 개공율이 높을수록 많이 나타나 $5\%$와 $10\%$개공율에서 4일후 $10\%$이상 나타났다. 유리당은저장기간의 경과에 따라 maltose와 sucrose가 감소하였는데 개공율이 낮을 수록 많이 감소하였다. 냉장에서 곰팡이 발생은 관찰되지 않았으며 중량모율은 $5\%$와 $10\%$ 개공율에서 12일부터 약 $10\%$를 보이면서 시들기 시작하였으며, 밀폐와 $1\%$는 30일간 저장기간에서도 양호한 외관상태를 보였다. 유리당중 maltose는 감소, sucrose는 감소하였다가 증가하는 경향을 보였다. 이상의 결과에서 보관상자의 개공율을 조절하여 수삼의 저장성을 향상시킬 수 있음을 알 수 있었다.

• 한국측량학회지
• /
• 제8권2호
• /
• pp.45-51
• /
• 1990

수치표고모델은 실제지형모델의 참값과 비교하여 충분하고 높은 정확도를 지녀야 하며, 미리 주어져 있는 지형데이타와 보간법을 사용하여 임의의 평면위치(X, Y)에 대응하는 표고 h를 구하고 경사를 구할 수 있는 모텔을 만들어 놓아야 한다. 보간의 정확도는 지형의 기복 상태와 자료의 밀도에 우선적으로 영향을 받게 되므로, 지형을 객관적인 방법으로 분류할 필요가 있다. 평균경사도와 면적비는 지형이 경사상태에 따라 비슷한 분류 결과를 가져오는 변수이지만, 지형의 국소적인 변화크기를 동시에 표시하는 변수는 면적비이다. 그러므로 본 연구는 지형의 분류를 좀 더 객관화하기 위하여 비고에 의해서가 아니라 경사도에 의해 분류하고, 경사와 곡률경중율의 영향을 분석하여 그 경사도에 합당한 매개변수를 도입하므로써 보다 현실에 가까운 모델을 재현하는데 연구의 목적이 있다. 연구의 결과는 첫째, 경사에 의한 지형의 분류는 평지는 pl6과 p24 준경사지 pl6과 S, 급경사지는 S 와 p24가 적합하고 곡률에 의한 분류는 평지와 준경사지에서 모두 p24와 S가 적합하며, 급경사지에서는 pl6이 적합하였다. 경사와 기복 변화량을 조합한 경우는 평지는 pl6, 준경사지는 p24, 급경사지는 S가 각각 적합하였다. 둘째, 유형화율은 경사 50%, 곡률경중율 0.0015에서 50∼80%로 가장 컸다.

• Journal of Chest Surgery
• /
• 제28권3호
• /
• pp.233-236
• /
• 1995

Subepicardial space is one of the regions in which fat in moderate amount is normally deposited. When excess deposits of epicardial fat occur, penetration or infiltration of fat into the connective tissues between muscle bundles is observed. In some cases with very extensive involvement of epicardial fat,myocardial insufficiency and conduction system defect such as heart block have been implicated. More fat is deposited over the right ventricle than over left and the anterior surface contains more fat than dose the posterior surface. We studied 40 patients who underwent open heart surgery under the cardiopulmonary bypass. This study was designed to evaluate the percentage of the area of epicardial fat of the right ventricular anterior surface, which is more accessible area during the operative procedure. Other variables included thickness of subcutanous tissue of anterior chest wall, the ratio of waist to hip circumference, body weight and age. In conclusion, the amount of the epicardial fat correlates with thickness of the subcutaneous fat of the anterior chest wall and simple linear regression analysis indicates good correlation with body weight. Increased age results in large amount of epicardial fat.

• 기술사
• /
• 제2권6_7호
• /
• pp.12-23
• /
• 1969

The purpose of this study is to find out the reasonable amount of evapo-transpiration required for the paddy rice plant during the whole growing season. So, on the basis of the 3year experimental data concerning the evapo-transpiration from 1966 to 1968, the author obtained the following results. 1) The leaf area index in the densely planted plot is generally higher than that in the conventionally planted one during the first half of growing season. So, the coefficient of transpiration in the former plot is some what higher than in the latter, and the coefficient of water surface evaporation under the plant cover has the inverse relation between both plots. 2) It is unreasonable that coefficient of evapo-transpiration is applied to the calculation of the evapo-transpiration requirments of each growing stage, because a certain degree of variation in meteorological factors and in the thickness of the plant growth is involved in it. 3) It is most reasonable that the rate of transpiration and of the water surface evaporation is applied to the calculation of the transpirated amount and evaporated one in each growing stage because it shows almost constant value in spite of any meteorological conditions in so far as the variety of rice, planted density and control of applying fertilizer are same and the disease and blight are negligible. 4) The ratio of the amount of transpiration to the weight of the whole air dried yields has the tendency of decreasing as that of the yields increase, having almost constant value despite the amount of pan evaporation; and the value is about 210 when the weight of root parts is included to that of the yields. 5) Although the required amount of transpiration during the whole growing season can be calculated with the above ratio, fig. 7 showing the relation between the amount of transpiration and the weight of the yields is more reasonable and will be convinient to find it. And the requirements of water surface evaporation during the same season can also be directly found with the weight of air dried straw refering to fig.8.

• 한국수소및신에너지학회논문집
• /
• 제32권5호
• /
• pp.285-292
• /
• 2021

To study the effect of the mixture ratio of Ni-Pt nanocatalysts on water electrolysis characteristics in anion exchange membrane system, Ni-Pt nanocatalysts were loaded on carbon black by using a spontaneous reduction reaction of acetylacetonate compounds. The loading weight of Ni-Pt nanocatalysts on the carbon black was measured by thermogravimetric analyzer and the elemental ratio of Ni and Pt was estimated by energy dispersive x-ray analyzer. It was found that the loading weight of Ni-Pt nanoparticles was 5.36-5.95 wt%, and the loading weight increased with increasing Pt wt%. As the Ni-Pt loading weight increased, the specific surface area decreased, because Ni-Pt nanoparticles block the pores of carbon black. It was confirmed by BET analysis and dynamic vapor sorption analysis. I-V characteristics were estimated.