• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.67-73
• /
• 2015

PURPOSES : This study was conducted to derive the optimum mixing ratio of phosphorescent pigment for the development of phosphorescent line marking. METHODS: In this study, we utilized a literature review and case study methodology, to describe the domestic and foreign state of practice for the production and mixing of phosphorescent pigment for use in line marking. The optimal mixing ratio was derived by comparing the reduction in luminance over time for the various phosphorescent pigment mixing ratios identified in the literature. In addition, performance and construction characteristics were analyzed using field testing techniques. RESULTS : The results were as follows: 1) the results of the luminance performance standards tests showed that all of the phosphorescence test specimens satisfied the phosphorescent fire protection standard. As the phosphorescent pigment mixing ratio increased, the luminance value increased, 2) the luminance reduction rate was minimum at the mixing ratio of 50%. However, when compared to a mixing ratio 40%, a small difference was recorded, the luminance reduction rate from the mixing ratio of 40% is judged as being converged. Therefore, in view of the economic efficiency, it was determined that the optimal mixing ratio was 40%, 3) as a result of construction on the field, a mixing ratio of 40% was found to have a higher luminance value than the general line marking for up to three hours after sunset, 4) it was found that the phosphorescent line markings without glass beads spraying had a higher luminance value than the phosphorescent line markings with glass beads spraying. CONCLUSIONS : Through the results of the basic experiments of the line markings obtained by blending a phosphorescent pigment, the results could be applied to play an important role in the development of phosphorescent line marking paint technology and in establishing application planning for on-site construction characteristics.

• 대한교통학회지
• /
• 제24권4호
• /
• pp.55-65
• /
• 2006

우리나라는 교통사고 사망자 가운데 보행자가 차지하는 비율이 43%로 매우 높으며, 이는 OECD평균의 2.5배에 이르는 수치이다 도로종류별 사고발생 특성을 보면 국도에서 보행자사고로 인한 사망자수 비율이 가장 높은 구성비를 차지하고 있다. 이에 따라 지방부 도로에서 보행자사고를 방지하기 위하여 보행자 관련 안전시설물 설치가 확대될 예정이다. 그러나 보행자 관련 연구가 주로 도시부 교차로를 대상으로 이루어짐에 따라 지방부 보행자사고 특성 분석에 대한 연구가 부족하고, 특히, 안전시설물의 보행자사고에의 효과에 대한 연구는 미미한 실정이다. 이에 본 연구에서는 지방부 4차로 국도를 대상으로 로짓모형을 이용하여 보행자사고 확률모형을 구축하고, 추정시 도로안전시설물 설치여부를 설명변수로 포함하여 그 효과도를 추정하였다. 시설물별 효과도는 승산비(Odds ratio)를 이용하여 비교위험I÷로 분석 제시하였다. 분석결과 시거개선, 보도설치, 조명설치가 보행자 사고를 줄이기 위한 효과적인 대안으로 나타났다.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.43-55
• /
• 2016

PURPOSES : This study aims to develop a repair material that can enhance pavement performance, inducing rapid traffic opening through early strength development and fast setting time by utilizing MgO-based patching materials for repairing road pavements. METHODS : To consider the applicability of MgO-based patching materials for repairing domestic road pavements, first, strength development and setting time of the materials were evaluated, based on MgO to $KH_2PO_4$ ratio, water to binder ratio, and addition ratio of retarder (Borax), by which the optimal mixture ratio of the developed material was obtained. To validate the performance of the developed material as a repair material, the strength(compressive strength and bonding strength) and durability (freezing, thawing, and chloride ion penetration resistance) was checked through testing, and its applicability was evaluated. RESULTS : The results showed that when an MgO-based patching material was used, the condensation time was reduced by 80%, and the compressive strength was enhanced by approximately 300%, as compared to existing cement-based repair materials. In addition, it was observed that the strength (compressive strength and bonding strength) and durability (freezing and thawing, and chloride ion penetration resistance) showed an excellent performance that satisfied the regulations. CONCLUSIONS : The results imply that an emergent repair/restoration could be covered by a rapid-hardening cement to meet the traffic limitation (i.e. the traffic restriction is only several hours for repair treatment). Furthermore, MgO-based patching materials can improve bonding strength and durability compared to existing repair materials.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.524-528
• /
• 2007

The results of evaluating steel corrosion in concrete containing chloride content of various levels indicated that the more chloride content in concrete leads to the lower potential and higher corrosion current density. However, the open circuit potential of steel varied with time and exposure condition, and the corelation between the open circuit potential and corrosion current density was not obvious. In order to determine the critical threshold content of chloride of steel corrosion in concrete, the concept of average corrosion current density was employed. The range of critical chloride content in portland cement concretes was about $1.56{\sim}1.77%$($Cl^-$, %, wt of cement content) along with water-cement ratio, and higher water-cement ratio resulted in reduction in critical threshold chloride content.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.1-7
• /
• 2009

고령화가 진행될수록 고령운전자의 수 역시 증가될 것으로 예상되어 향후 고령운전자에 의한 교통사고는 급증할 것으로 판단된다. 본 연구는 고속도로 교통사고 발생시 고령층과 비고령층의 구분에 따른 교통사고 특성을 분석하였다. 분석결과 비고령층에 비해 고령층에 작용하는 영향요인이 다르게 나타남을 알 수 있었다. 로짓모형을 통해 비고령층과 고령층의 Odds Ratio를 분석하여 사고영향요인에 따른 차이점을 알아보았으며 고령운전자의 사고 분석 모형을 개발하였다. 비고령층에 비해 곡선구간 및 절토구간, 노면의 습기상태일 때 고령운전자의 사고위험이 높은 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.73-76
• /
• 1999

In recent, concrete material like specific cement and additives having many functions hsa been developed. In road pavement, ultra high early strength cement or organic material are used to open the road early, but there are many restrictions like workable time and special equipment. We aim to developed specific concrete which 1 day strength is over 300kgf/$\textrm{cm}^2$ to open the road within one day and workable time is maintained over 1 hour that can make the concrete ready mixed concrete. In this study, we are convinced if the ratio of hauyne clinker or its additive is increased early strength property is progressed and if the ratio of non hydrous gypsum is increased longtime strength is progressed. The concrete strength is 290-310 kgf/$\textrm{cm}^2$ at 1 day, 570-640 kgf/$\textrm{cm}^2$ at 28 day and the workable time is maintained over 30 minutes. As the results of this experiments We find out the possibility to developed the 1 day usable ready mixed concrete with high early strength.

• 터널과지하공간
• /
• 제27권1호
• /
• pp.50-57
• /
• 2017

본 연구는 네트워크형 복층터널의 환기설계를 위하여 분기부지점에서 발생할 수 있는 충격손실에 대한 실험연구이다. 충격손실양을 결정할 수 있는 충격손실계수는 현재까지 종횡비가 일정한 원형이나 사각단면에 관한 설계값 및 이론식만이 존재하고 있다. 하지만 현재 국내에서 검토중인 복층터널이 종횡비가 약 1:3정도로 층고가 낮은 소형차 전용도로이기 때문에 본 조건에 맞는 충격손실계수의 제시가 필요하다. 이를 위하여 Reynolds 상사법칙이 적용된 약 1:23 스케일의 실험모델을 제작하여 큰 종횡비에 따른 분기부 지점 충격손실계수를 측정하였다. 연구 결과 분기부가 존재할 때 직선구간에 작용하는 충격손실 계수 와 분기부에서 작용하는 충격손실 계수 이 선행연구 되었던 설계값 및 이론식보다 2~3배 높게 측정되는 것을 확인하였다. 즉, 큰 종횡비가 충격손실계수에 미치는 영향이 크다는 것을 확인함에 따라서 네트워크형 복층터널의 환기설계 시 보다 정확한 설계값을 제시할 수 있을 것으로 기대한다.

• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.117-126
• /
• 2015

PURPOSES : This study prioritizes potential technology for establishing a safe work zone environment on roadways. We consider almost all conceivable technologies that enable mitigation of unexpected accidents for both road workers and drivers. METHODS : This study suggests a methodology to set the priority of potential technology for establishing a safe work zone environment by using the analytical hierarchy process (AHP). For this purpose, the AHP structure was first developed. Thereafter, a web-based survey was conducted to collect experts' opinions. Based on the survey results, weights associated with the relevant criteria of the developed structure were estimated. With the consistency index (CI) and consistency ratio (CR), we verified the estimated weights. In addition, a sensitivity analysis was performed to confirm whether the estimated weights were reliable. We finally proposed the priority for potential technology for establishing a safe work zone environment on roadways. RESULTS : In the first level, safety technology has the highest priority, and real-time information delivery for work zone, hazard warning for drivers, and temporal automated operation for traffic facilities were selected in the second level of hierarchy. CONCLUSIONS : The results imply that establishing the priority will be useful to establish a future road map for improving the work environment for road workers and drivers by employing appropriate protection facilities and developing safety systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.735-741
• /
• 2011

In the early phase of vehicle development, CAE is conducted as tool for vehicle performance assessment. To maintain acceptable road noise performance, solution for reduced vehicle sensitivity is required. Chassis interface dynamic stiffness characteristics are key component to isolating vibration and noise of road from the vehicle interior. This research provide how to set up the optimized dynamic characteristics under noise effect through DFSS study. CAE-based DOE is performed to build prediction math model, CMS process involves DOE to achieve very fast run times while giving results very comparable. Minimized $95^{th}$ percentile of performance distribution is applied to minimize vehicle sensitivity and road noise levels variation during the optimization process. Finally, the results of optimization were reviewed for performance and robustness.

• 한국환경과학회지
• /
• 제21권3호
• /
• pp.277-287
• /
• 2012

The MFFn(Mass First Flush) was analyzed for various rainy events(monitoring data from 2008 to 2009) in Transportation area(Highway, National road, Trunk road). Estimated MFFn using SWMM was evaluated by comparison with observed MFFn. MFFn was estimated by varying n-value from 10% to 90% on the rainy events. The n-value increases, MFFn is closed to '1'. As time passed, the rainfall runoff was getting similar to ratio of pollutants accumulation. The result of a measure of the strength of the linear relationship between observed data and expected data under model was good ($R^2$=0.89). Pollutants runoff loads by volume showed Highway 26.6%, National road 44.8%, Trunk road 35.0% at the MFF20(20% by total runoff). A case of MFF30, pollutants runoff loads by volume showed Highway 40.2%, National road 54.3%, Trunk road 46.8%. According to the results, Initial precipitation basis were Highway MFF30, National road MFF20, Trunk road MFF30 when the Non-Point source control facilities set up.