• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.206-209
• /
• 2003

The purpose of AR and HR coating is acquire the very low reflection rate and the high reflection rate through the deposition of a thin film using the refraction ofmaterial. Basically if the high refractive material and the low refractive material are chosen and the condition for the experiment is determined, then we solve theproject with the optical design and multi thin film coating. First of all, we choose $SiO_2$for the low refractive material and $TiO_2$ for the high refractive material and apply Sputtering System easy to control the refraction rate and excellent in reconstruction to the equipment of thin film multiplication. For the control of the refraction rate and growth rate we modify RF Power and the ratio of Gas(Ar:O2), And we use Ellipsometer for estimation and analysis of the refraction rate and growth rate and AFM&SEM for the analysis of surface and component.

• Journal of Microbiology and Biotechnology
• /
• 제23권5호
• /
• pp.715-718
• /
• 2013

Density of catalytic organisms can determine the biodegradation capacity and specific biodegradation rate (SBR). A new index, biodegradation capacity utilization (BCU, %), was developed for estimating the extent of actual biodegradation of a gas compound over the full capacity. Three methanotrophic cultures were serially diluted (1-1/25), and methane SBR and BCU were measured. Consistently, biomass reduction increased the SBR and decreased the BCU. Linearity (p < 0.05, r > 0.97) between the BCU and cell density indicated the reflection of biodegradation capacity by BCU. Therefore, BCU is indicative of whether the density of catalytic organisms is pertinent for SBR evaluation of low-soluble gaseous compounds.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권5호
• /
• pp.197-202
• /
• 2002

In this paper, the characteristics of the household AC power line network is analyzed for the low bit rate powerline communication (PLC) in the frequency range from 10㎑ to 450㎑ The PLC channel transfer characteristics including its characteristic impedance are derived based on the network topology which is constructed with the household power lines loaded with the various types of electric apparatus. Both the distributed circuit analysis and the lumped circuit model based analysis are applied for the characterization of the PLC channel and the results are compared by the computer simulations. The analysis illustrates very well the adverse effects caused by the loading of electric apparatus and as well those casued by the reflection of wavers in the household AC Power line communication network.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.305-307
• /
• 2001

In this paper, the household AC power line network is characterized for the low bit rate power line communication (PLC) in the frequency range from 10kHz to 450kHz. Various types of electric apparatus and the power lines constitute the network topology, and the PLC channel transfer function and the channel impedance are derived based on the constructed network topology. The channel characteristics derived with the lumped circuit model and the distributed circuit model are compared using the computer simulations. The effect of the wave reflection and signal distortions are also investigated.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.329-330
• /
• 2008

GPS which measured user's location information outdoors should be of poor sensitivity because of interference and jamming of different electromagnetic waves. Specially, it has a defect of low received rate in high-rise urban where reflection and refraction of satellite signal go well. In this paper, I propose user location information sharing modeling of both vehicle and mobile phone using bluetooth in urban.

• 대한전자공학회논문지TC
• /
• 제41권8호
• /
• pp.93-97
• /
• 2004

전력선 통신의 매체인 전력선은 60Hz 전력 공급을 위해 설계되었기 때문에 고속 전력선 통신을 위한 1MHz∼30MHz 대역에서는 전력선은 전기적으로 많은 다른 특징을 갖는다. 따라서 고속 전력선 통신을 위해서는 전력선의 고주파 특성-감쇄 지연, 임피던스-등이 자세하게 분석되고 연구되어야 한다. 본 논문에서는 고속 전력선 통신용 1MHz∼30MHz 주파수 대역 옥내저압 전력선 (220V) 임피던스를 측정하였다. 벡터 회로망 분석기와 저압 전력선 결합 장치(coupling unit)를 이용하여 임피던스를 측정하였다. 결합 장치를 T형 등가회로로 바꾸어, 전체 회로에서 얻은 산란계수를 이용하여 저압 전력선 임피던스를 구했다. 제안된 방법으로 표준 한국형 저층 연립 아파트에 대한 임피던스를 측정하고, 그 특성을 분석하였다. 또한 임피던스 정합을 위하여 평균 임피던스를 구하였고, 측정결과 평균 임피던스는 약 100Ω이었다.

• 한국해안·해양공학회논문집
• /
• 제29권5호
• /
• pp.269-277
• /
• 2017

최근, 해변모래의 침식을 방지하기 위해 잠제를 설치하고 있다. 잠제설치는 모래 침식의 손실을 최소화하기 위해 만들어졌다. 이런 이유로, 잠제를 무분별하게 전국적으로 계획하여 건설하고 있다. 그러나 해안선 유지를 위해 설치된 잠제는 상당히 문제가 있는 방법이다. 고가의 건설비, 해양공간이용, 해수수질, 해안선 변화 등의 단점도 있다. 특히, 해양 레저를 즐기는 이용자들은 해상공간이 단절되기 때문에 이를 좋아하지 않는다. 광안리와 같은 해수욕장은 인위적으로 양빈모래를 공급하여 해수욕장을 유지하는 곳이다. 연성공법이란 양빈모래의 유실방지를 위해 수중에 잠재를 대신하여 유동성 재질로 폭 넓은 연성구조물을 설치하는 공법을 말한다. 본 연구는 해변 침식을 완화할 수 있는 연성공법의 일환으로 cell group을 설치하였다. 즉, 양빈모래의 유실을 막기 위해 잠제 대신에 cell group을 사용하여 사빈침식의 정도를 완화 할 수 있는 공법을 적용한 것이다. 2차원 고정상 실험에서 cell group의 설치로 인한 파고감소효과 및 저반사율을 제시하였고, 이동상 수리모형실험에서, cell group 설치로 인한 양빈모래의 포착률과 양빈 모래의 침식방지율을 제안하였다. 따라서 수리모형실험의 결과에 의하면 침식해안의 사빈에 cell group을 설치하면 파고감소효과, 저반사율과, 양빈사의 침식방지율, 양빈사의 높은 포착률에 의해 양빈사의 유출이 방지되어 안정된 해안을 유지할 수 있었다.

• Journal of Magnetics
• /
• 제17권2호
• /
• pp.133-137
• /
• 2012

We investigated the effects of pulsed magnetic fields (PMF) stimulus on electroencephalogram (EEG) alpha activity and heart rate variability (HRV) from electrocardiogram (ECG) measurements with various stimulus durations at acupoint PC9. The alpha activity in the EEG and the ratio of low frequency power and high frequency power (LHR) in the HRV, a reflection of sympathovagal activity, were increased and decreased, respectively, after PMF stimulus of 3 min. Our spectral analysis quantitatively proved that the changes in the EEG alpha activity were consistent with an autonomic function in the ECG. These findings suggest that appropriate PMF stimulus results in the same effect as that of acupuncture applied to the acupoint PC9, which is closely related to the parasympathetic activity of the autonomic nervous system.

• Tribology and Lubricants
• /
• 제15권4호
• /
• pp.343-353
• /
• 1999

The role of viscosity index improver's(Ⅶ) additives for modem engine lubrication is complex. Under the condition of atmosphere or low shear rate, the characteristics of Ⅶ added lubricant is verified and quoted frequently for mathematical model of lubricant behavior. However, recent research shows that added lubricant has the characteristics of shear thinning at high shear rate condition although it performs well enough over the whole range of working temperature. At high shear rate, they show significant decrease of apparent viscosity irrespective of temperature. Many experimental researches verify that Ⅶ added lubricant shows boundary film layer formation on the solid surface as well as shear thinning effect by its polymeric molecular characteristics. The intend of our research is to verify the effects of Ⅶ from the viewpoint of continuum mechanics, because conventional Reynolds'equation with only pressure-viscosity relation cannot fully predict the lubricant behavior under the Ⅶ added condition. In these aspects, Reynolds'equation of Newtonian fluid model lacks the reflection of real fluid behavior and there is no way to explain the non-linear characteristics of Ⅶ added lubricant. In this research, we mathematically modeled the Ⅶ added lubricant behaviors which are the characteristics of non-Newtonian fluid behavior at high shear rate and boundary film formation on the solid surface. The consideration of elastic deformation in the contact region is also included in our computation and finally the converged film pressure and the film thickness with elastic deformation are obtained. The results are compared with those of Newtonian fluid model.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.64-67
• /
• 1997

In the total artificial heart(TAH), a transcutaneous information transmission system(TITS) is vely important to monitor the TAH status and detect the device failure, and repair the possible problems. First of all, the communication channel(skin) and method were simulated in terms of transmittance, scattering, reflection and absorption, then the system was designed with size reduction including low power consumption and reliability compared to the previous one. The informations are transmitted through the skin(approximately 1cm in depth) by frequency modulated near infrared(NIR) pulses using 780nm laser diodes as transmitters and photodiode as receiver with high speed and high spectral sensitivity. The logic high and low frequencies are 3MHz, 1MHz respectively. The system is a bidirectional data link for more than 38.4Kbps data rate, full-duplex with a bit error rate of less than $10^{-5}$.