• Journal of the Korean Ceramic Society
• /
• v.22 no.2
• /
• pp.44-50
• /
• 1985

The crystallization behavior of $K_2O-SiO_2$ glasses with added $TiO_2$ and the effect of $TiO_2$ on internal nuleation at temperature in the range of 875 to 121$0^{\circ}C$ have been investigated by means of X-ray diffractometry optical microscopy and scanning electron microscopy. The crystalline phase of these glasses identified by X-ray diffractometry is cristbalite. The scanning electron microspcopy reveals a two-phase layer of dendritic crystals and intersitial melt which grow from the surface at a constant rate, The observed crystallization rates are consistent with a diffusion-controlled mechanism. An equation relating viscosity and undercooling to growth rate is presented.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.483-488
• /
• 2008

The effect of methylene chloride/1,3-dioxolane co-solvent on the crystallization in the optical polycarbonate film was investigated. Increasing 1,3-dioxolane content in co-solvent resulted in the crystallization due to the lowering of solvent evaporation rate during film drying process. The crystallization in PC film could be minimized by either controlling of solvent composition and increasing solvent drying temperature. It was found that the surface roughness of solution casting PC film was affected by both crystallization and solvent evaporation rate. This morphological effect by alternative solvent is ascribed to a large decrease in light transmissivity on the optical PC film.

• Journal of the Korean Ceramic Society
• /
• v.41 no.8
• /
• pp.578-581
• /
• 2004

In this study, we proposed the novel method that can crystallize the amorphous silicon by adjacent Pd-MILC enhanced Ni-MILC. With this method, the MILC rate was about 15 ${\mu}$m/h at 550$^{\circ}C$ which is four times faster than conventional MILC rate. The crystallization rate increased rapidly with the spacing between Ni and Pd decreased. And it was independent on Ni and Pd layer thickness and amorphous silicon active width. However, when Pd was capped by a Ni layer, there's no enhancement on Ni-MILC. This phenomenon implies that the enhancement of Ni-MILC rate comes from not Pd material itself but Pd-MILC induced tensile stress. We can explain these phenomena with a novel MILC mechanism.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.582-589
• /
• 1987

The thermal properties of poly (ethylene terephthalate) (PET) modified by 5-sulfoisophthalic acid sodium salt(SIAS) were studied. The glass transition temperature was increased, and the melting temperature and the crystallization rate were decreased as the content of SIAS unit was increased. The decrease of crystallization rate is thought to be due to the polar, bulky sulfonic acid sodium salt group which greatly retards the crystallization on to the growing crystal surface of the diffused polymer chain. The crystallization mechanism of copolyester is dependent on the content of SIAS unit and the three dimensional growth of crystal is hindered by the added SIAS unit.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.358-364
• /
• 2013

Borosilicate glass(GVB-Solutions in glass, 2mm, Germany) was prepared in the composition of $80.4SiO_2-4.2Na_2O-2.4Al_2O_3-13.0B_2O_3$. The 2-step crystallization was performed around $584^{\circ}C$ of glass transition temperature ($T_g$), and $774^{\circ}C$ of crystallization temperature($T_c$). The maximum nucleation rate was $8.8{\time}10^9/mm^3{\cdot}hr$ at $600^{\circ}C$ and the maximum crystal growth rate was 3.5nm/min at $750^{\circ}C$. The maximum mechanical properties were observed at 22.8% of volume fraction, the strength, hardness and fracture toughness was 555MPa, $752kg/mm^2$, $1.082MPa{\cdot}mm^{1/2}$. The crystal size of 177nm which has volume fraction of 22.8% showed maximum strength of 562MPa, it is about 157% higher than parent borosilicate glass. From these results, the crystallized borosilicate glass can be applied weight lighting of bullet proof materials.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.2
• /
• pp.48-50
• /
• 2008

Solid phase crystallization (SPC) of amorphous silicon is usually conducted at around $600^{\circ}C$ since it is used in the application of flat panel display using thermally susceptible glass substrate. In this study we conducted SPC experiments at temperatures higher than $600^{\circ}C$ using silicon wafers. Crystallization rate becomes dramatically rapid at higher temperatures since SPC kinetics is controlled by nucleation with high value of activation energy. We report SPC kinetics of high temperatures compared to that of low temperatures.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1331-1336
• /
• 1995

The glass-ceramics for ferro-electric were made from compositions of 70PbO.16TiO2.8SiO2.4B2O3.2AlPO4 (wt%) and 67.5PbO.20TiO2.8.5SiO2.2B2O3.2AlPO4 (wt%). The crystallization kinetics for PbTiO3 crystalline phase formation from glass was studied using non-isothermal DSC techniques. The values of activation energy, ΔE using variables of heating rate and temperature were calculated at various reaction fractions obtained from peak area over DSC. The results indicated that activation energy was lowest at 60% reaction fractions and the activation energy of glass containing 20.0 wt% TiO2 is higher than that of glass containing 16.0 wt% TiO2. The crystallization mechanism was three dimensional growth (n=4).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.57-63
• /
• 2010

Layer crystallization process was tested for the separation(or concentration) of cesium and strontium fission products in a LiCl waste salt generated from an electrolytic reduction process of a spent oxide fuel. In a crystallization process, impurities (CsCl and $SrCl_2$) are concentrated in a small fraction of the LiCl salt by the solubility difference between the melt phase and the crystal phase. Based on the phase diagram of LiCl-CsCl-$SrCl_2$ system, the separation possibility by using crystallization was determined and the molten salt temperature profile during layer crystallization operation was predicted by using mathematical calculation. In the layer crystallization process, the crystal growth rate strongly affects the crystal structure and therefore the separation efficiency. In the conditions of about 20-25 l/min cooling air flow rate and less than 0.2g/min/$cm^2$ crystal flux, the separation efficiency of both CsCl and $SrCl_2$ showed about 90% by the layer crystallization process, assuming a LiCl salt reuse rate of 90wt%.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.848-854
• /
• 2001

The crystallization behavior of poly (ethylene terephthalate) (PET) /ethylene-methyl acrylate-glycidyl methacrylate copolymer (E-MeA-GMA) blend was studied. The extent of reaction and the reaction rate between PET and E-MeA-GMA were measured with torque rheometer, FT-IR and SEM. The effects of the grafting reaction on the crystallization behavior were investigated with DSC and time-resolved light scattering (TR-LS) techniques. The morphological change at the lamellar level was also examined by using a small angle X-ray scattering (SAXS) method.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.117-121
• /
• 1997

Glutamic acid can be crystallized inside cation exchange column when displacer NaOH concentration is high enough to concentrate displaced glutamic acid beyond its solubility limit. Resulting crystal layer of glutamic acid was moved with liquid phase through the column, and thus could be eluted from the column and recovered in fraction collector. For the purpose of enhancing crystal recovery, effects of operating parameters on the crystal formation were investigated. The increase in the degree of crosslinking of resin favored crystal recovery because of its low degree of swelling. Higher concentration of displacer NaOH was advantageous. If NaOH concentration is too high, however, crystal recovery was lowered due to the solubility-enhancing effects of high pH and ionic strength. The decrease of mobile phase flow rate enhanced crystal recovery because enough time to attain local equilibrium could be provided, but film diffusion would control the overall crystal formation with extremely low flow rate. Lower temperature reduced solubility of glutamic acid and thus favored crystal formation unless the rate of ion exchange was severely reduced. The ion exchange operated by displacement mode coupled with crystallization was advantageous in reducing the burden of further purification steps and in preventing purity-loss resulted from overlapping between adjacent bands.